View Full Version : 3 day build picture thread!! big power inside!
Ray Pampena
05-02-2011, 06:34 PM
well here we go... ECG is friday.. NG is around the corner and im going to both. ive been real busy at the shop and when i get home, i dont want to know anything about building a car (theres never room or a free lift so i always do my car at home)
i took my car apart last summer to build a new shortblock with my new billet crank that ive had for a while. this is the same crank a few of you have on order that SHOULD HAVE SHIPPED OUT TO ME FRIDAY fingers crossed :) except mine is for the 72 stroker 3.5L. its the exact dimentions as the standard stroker kits i sell.
so, i sold off my parts i had and well today... its go time :)
heres pic #1
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16067_.jpg
Amphiron
05-02-2011, 06:46 PM
Looking good so far.
Subscribed.
mb3000
05-02-2011, 07:48 PM
Subscribed.
xwire
05-02-2011, 07:49 PM
get'er done Ray, looking forward to seeing you and your car at the NG this year... speaking of NG you going to have a chance to sneak out of town for a weekend tirp to STL before the NG?
green-lantern
05-02-2011, 08:06 PM
Looking forward to seeing this thread develop and I'm glad your making it to NG. See you there!
Subscribed.
This should be mandatory.
IcelandGTO
05-02-2011, 08:31 PM
Yeah!
sad to be stuck in Iceland over NG!!
J-Groove
05-02-2011, 09:45 PM
This thread should deliver nicely. :)
-john
CoopKill
05-02-2011, 10:29 PM
I'ma in for this one!
VR-4 0wnz j00
05-02-2011, 10:50 PM
Saw it on FB, looking forward to the results :D
GTO Assassin
05-03-2011, 03:17 AM
One delicious pic? Come on man.....
Scotty
Ray Pampena
05-03-2011, 09:27 AM
heres yesterdays pics.. todays goal is to have the engine and trans assembled and in!
heres the reason i let it sit so long... i love this car:)
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16173_.jpg
the new pistons i wont be using
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16174_.jpg
new piston (same design as the old)
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16175_.jpg
the old pistons assembled on the rods.. going in
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16177_.jpg
heres the mains that came out.. shiney but still perfect:)
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16176_.jpg
block all clean and honed ready for tomorrow
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16178_.jpg
VR-4 0wnz j00
05-03-2011, 11:13 AM
Oh baby, good start
Ninja Performance
05-03-2011, 11:58 AM
In for what will be awesomeness.
MORE PIX!
-Chris
TT Eric
05-03-2011, 12:36 PM
Nice!
Eric
PearlWhiteR/T
05-03-2011, 03:26 PM
Looking really slick so far... nice sleeper by the way man.
STLVR4
05-03-2011, 05:58 PM
In for what will be awesomeness.
MORE PIX!
-Chris
+1
Cant wait to see the progress
Austin@STM
05-03-2011, 06:10 PM
Nice crank ;)
Hope everything works out in time, hope to see you at NG this year, im finally going to it I think, wheth my car goes or not.
mb7050
05-03-2011, 06:19 PM
+991002
nom nom nom, I :luv: your cars too.
Blackmount
05-03-2011, 11:34 PM
Very nice! subscribed!
Ray Pampena
05-04-2011, 12:14 AM
today was a lot of work.. the bottoms of the pistons hit the counter weights so i had take them back apart a few times and grind them.
heres todays progress!
main studs.. thanks Nelson!
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16345_.jpg
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16344_.jpg
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16343_.jpg
why dont you just drive me? im so happy out here!
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16342_.jpg
no.. fix me and get many tickets!
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16346_.jpg
i love the look of how far the pistons go down in the hole :)
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16340_.jpg
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16339_.jpg
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16338_.jpg
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16337_.jpg
CoopKill
05-04-2011, 12:25 AM
Dude you can get some shit done in a hurry!
Nice!
stealthII
05-04-2011, 12:34 AM
You are a machine dude. Does grinding down the piston throw off the balance of everything or is it not much material? I didn't see it but what piston/rods are you using now a days? Also, how does that crank compare to the BC 3.4 crank?
Either way, it's looking good!
Ray Pampena
05-04-2011, 08:08 AM
You are a machine dude. Does grinding down the piston throw off the balance of everything or is it not much material? I didn't see it but what piston/rods are you using now a days? Also, how does that crank compare to the BC 3.4 crank?
Either way, it's looking good!
the amount needed to grind off the pistons wont throw it off since its a few thousandths of an inch of aluminum in a small area. this crank is more stroke and made in the USA and is a billet
the crank is not cross drilled. they stopped cross drilling race cranks quite a few years back
aaronatstate
05-04-2011, 08:09 AM
Yay, a "real" forged crank at last rather than just the imaginary "forged" stock one.
Steve
Shut, the, fuck, up. You have no idea what you are talking about. Plain and fucking simple. Do not come into a legendary members thread, who has built, and owned some of the fastest 3/S's in the world, and muck it up with your bullshit that has netted you a 15s junkyard mobile that blows up 5 times a year.
Epic build Ray. I forget are you going to NG this year?
Ray Pampena
05-04-2011, 09:00 AM
Shut, the, fuck, up. You have no idea what you are talking about. Plain and fucking simple. Do not come into a legendary members thread, who has built, and owned some of the fastest 3/S's in the world, and muck it up with your bullshit that has netted you a 15s junkyard mobile that blows up 5 times a year.
Epic build Ray. I forget are you going to NG this year?
ill be there!
Ray Pampena
05-04-2011, 09:23 AM
So how is oil going to get to the big ends when the one oil hole in the mains is sitting in the cradle and the cradle bearing half isn't grooved?
Fuck, why worry, just fire it up.
That's right, it's called "residual oiling"
Steve
ill post one time to this. then, if you want to debate on it you can start a thread on it :)
cross drilling was the hot topic in the 90s. all the drag race crank companies were doing it. they later found that air was getting pulled in the "inner" oil hole on the rod throw. most engines still would live but better oiling was attained by not cross drilling. over time things change.
mitsu also made the change back agiain with the 75 crank which is running in many cars including Itallo Grassos 1000whp car that i tuned. Matt M has a crank just like this that i sold him that he runs 8s with. sooo... yes i will just fire it up. hopefully today ;)
green-lantern
05-04-2011, 10:07 AM
So how is oil going to get to the big ends when the one oil hole in the mains is sitting in the cradle and the cradle bearing half isn't grooved?
Fuck, why worry, just fire it up.
That's right, it's called "residual oiling"
Steve
My god you’re an f-ing idiot.
Damn, I miss neg rep.
VR4Rob
05-04-2011, 10:19 AM
Go Ray go! Red car is looking good... did you repaint the front bumper?
VR-4 0wnz j00
05-04-2011, 10:52 AM
Waiting for the video
i3igpete
05-04-2011, 12:58 PM
Fuck, why worry, just fire it up.
That's right, it's called "residual oiling"
It actually is. Martin and Xu found that the theoretical hydrodynamic squeeze flow rate (Qh) is smaller than the theoretical pressure feed flow rate (Qp). Hence why he created a new formulation of oil flow equations for conrod bearings.
Improved Oil Flow Prediction Method for Connecting-Rod Bearings Fed by a Single Hole in the Crankpin (http://papers.sae.org/930791/)
i3igpete
05-04-2011, 01:02 PM
Furthermore, continuous feed flow is NOT necessary due to centrifugal effect of the oil. I've attached some typical simulation results. Notice that the average drilling pressure at the big end bearing is HIGHER than the pressure at the main gallery (3 bar).
Without a crossdrill, yes, the average pressure at the main side would be exactly 1.5 bar, but the main takeaway point is that the big end oil pressure is driven by centrifugal forces. vacuum pressure refill the drilling just fine when the cylinder is at BDC.
2631
If you're still interested, I'll make a separate thread about conrod bearing theory this afternoon. The short version is that when the drilling is pointing towards the cradle, oil flow at the conrod bearing is stopped. Why is it stopped? The hydrodynamic oil pressure in the conrod bearing is in the 1000+ bar range during cylinder firing, this acts like a dead end in the drilling.
terrets
05-04-2011, 02:10 PM
Can I haz Vidz NOW? :D
Are you a robot?
DrkZide
05-04-2011, 04:13 PM
I'm impressed............or maybe I should've be considering it's Ray lol
Jesters Deadd
05-04-2011, 04:43 PM
subscribed.
FeaRpb
05-04-2011, 05:58 PM
:yawn: ;)
aaronatstate
05-04-2011, 06:15 PM
ill be there!
Hell freaking yeah man, I'll finally get to meet the legend! :)
HilbillyHomeboy
05-04-2011, 09:05 PM
Movin' right along, as usual. :)
Jeremy
Ray Pampena
05-04-2011, 10:41 PM
running! pics and vids after i go get dinner
VR-4 0wnz j00
05-04-2011, 10:44 PM
Saw the engine pic, how the hell do you build so fast. Do you sleep?
CoreyB
05-04-2011, 11:02 PM
Subsribed late, awesome work Ray.
Emilie@GZP
05-05-2011, 12:03 AM
High five. Very nice. :)
Ray Pampena
05-05-2011, 12:43 AM
cant sleep clowns will eat me
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16516_.jpg
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16517_.jpg
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16514_.jpg
the big jack in action!
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16513_.jpg
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16512_.jpg
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16511_.jpg
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16510_.jpg
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16509_.jpg
thor'svr4
05-05-2011, 04:33 AM
wow! just wow.
green-lantern
05-05-2011, 08:32 AM
cant sleep clowns will eat me
:lo5l:
Incredible, I thought I was working fast yesterday. :Clap:
Any plans to run through Tennessee again any time soon? I'd love to get you to tune my car this time (Damn I wish it was running before).
HilbillyHomeboy
05-05-2011, 08:42 AM
Hell yeah! Ford blue FTW! :D
Jeremy
UTRacerX9
05-05-2011, 09:41 AM
Looking good Ray! Well done!
DocWalt
05-05-2011, 10:42 AM
Yummmmmm :D
cant sleep clowns will eat me
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16516_.jpg
How is the collector joined in this pic? It just looks like straight cut ends. Is it just not welded up yet?
Emilie@GZP
05-05-2011, 12:58 PM
They're slipped on and clamped. No welding.
n2nsanity
05-05-2011, 02:33 PM
running! pics and vids after i go get dinner
holy hell! you did it in 2 days?
They're slipped on and clamped. No welding.
I see, I guess I would have assumed that the expanding gases would be too much for clamps right from the header.
terrets
05-05-2011, 06:00 PM
Oh my gawd...
Those headers are sexy.
20G_VR4
05-05-2011, 08:33 PM
http://i27.photobucket.com/albums/c178/raysinsomnia/861217171_photobucket_16509_.jpg
Are you not worried about the charge pipe in this pic? I see you have heat wrapping to keep the heat out, but once that gets hot, it'll keep it in, negating the effects of the IC. Are you just assuming that you would have time for it to cool down between runs?
Emilie@GZP
05-05-2011, 08:45 PM
Ray doesn't worry. He's like Chuck Norris of 3/S's. He beats that car into submission.
onebadmollafolla
05-05-2011, 09:07 PM
I think when this is all said and done, you and I should move in and get an apartment together! :suspect:
Granny
05-05-2011, 10:19 PM
:lo5l:
Incredible, I thought I was working fast yesterday. :Clap:
Any plans to run through Tennessee again any time soon? I'd love to get you to tune my car this time (Damn I wish it was running before).
If you guys go to the dyno again I'm in!
Beautiful work Ray..can't wait to see it at NG.
aaronatstate
05-05-2011, 10:48 PM
Post from Facebook says 700whp at 19psi no meth...
CoopKill
05-05-2011, 11:05 PM
What fuel?
Blackmount
05-05-2011, 11:12 PM
the STIG of 3\S....
Vid...NOW.
Ray Pampena
05-05-2011, 11:27 PM
19psi pump 93 no meth.. 10.8 afr and 16 deg timing. this is may base drive mode:) the heat wrap is because the pipe is near the turbine housing
YouTube - Ray Pampena 19psi straight pump gas (http://youtu.be/f9ipMdE5xSI)
STLVR4
05-05-2011, 11:35 PM
Very nice.
Now...30psi and C16.
Go.
Ray Pampena
05-06-2011, 12:07 AM
hey Steve, i just "fired it up" lol
green-lantern
05-06-2011, 12:10 AM
hey Steve, i just "fired it up" lol
You guys and your ricer parts :lmao:
IcelandGTO
05-06-2011, 12:19 AM
blahblahblah.....
Steve
Go away!!
onebadmollafolla
05-06-2011, 01:07 AM
hey Steve, i just "fired it up" lol
You reckless bastard!
terrets
05-06-2011, 04:57 AM
I really really dont like you :P
aaronatstate
05-06-2011, 06:30 AM
hey Steve, i just "fired it up" lol
Are your ringlands broken yet?
Ninja Performance
05-06-2011, 08:41 AM
Oh my gawd...
Those headers are sexy.
I believe they are GT Pro's setup, they were on the car when Ray purchased the car. It's a very cool setup. I think there is only 1 other setup like it out there as they (gt pro) never mass produced it.
-Chris
HilbillyHomeboy
05-06-2011, 09:33 AM
damnit, video won't work for me. :(
lol @ just fired it up comment. :lo5l:
Jeremy
FeaRpb
05-06-2011, 09:42 AM
Link doesn't work for me either. =(
EDIT: Fixed it
http://www.youtube.com/watch?v=f9ipMdE5xSI
VR-4 0wnz j00
05-06-2011, 09:47 AM
Come on Ray, only "ricers" dyno their cars.
CoreyB
05-06-2011, 09:52 AM
Sounds great, nice work Ray.
i3igpete
05-06-2011, 10:26 AM
I think there is only 1 other setup like it out there as they (gt pro) never mass produced it.
come to think of it, gt-pro didn't produce much of anything... :p
Ninja Performance
05-06-2011, 11:43 AM
come to think of it, gt-pro didn't produce much of anything... :p
In their defense, they did make a good number of custom parts, some of which were very nice both in design and execution. Ray's purple flame car (in this thread) is a prime example with the custom one off (maybe 2) turbo system.
-Chris
xwire
05-06-2011, 02:09 PM
In their defense, they did make a good number of custom parts, some of which were very nice both in design and execution. Ray's purple flame car (in this thread) is a prime example with the custom one off (maybe 2) turbo system.
-Chris
Agreed
Blackmount
05-06-2011, 07:00 PM
Fuckload of whp, and i have a feeling we are not done yet!
J-Groove
05-06-2011, 09:12 PM
Wow, just wow.
Not only great work, but insanely fast from start to on the dyno!
Ray, you truly live up to your hype. :)
-John
GTO Assassin
05-07-2011, 12:21 AM
I must have missed it... Ray - why you working on both cars or is it just the beast now?
Scotty
Markingtime
05-07-2011, 02:42 AM
Wow. Just wow.
green-lantern
05-07-2011, 03:29 AM
I must have missed it... Ray - why you working on both cars or is it just the beast now?
Scotty
F-ing aussies! Read the thread Scooter! :p
GTO Assassin
05-07-2011, 04:16 AM
I got confused. I thought Ray was building the red car up, then steve posted and I got all mad n stuff. lol Carry on.
Scotty
green-lantern
05-07-2011, 04:19 AM
I got confused. I thought Ray was building the red car up, then steve posted and I got all mad n stuff. lol Carry on.
Scotty
lol you are my snugly roo........
GTO Assassin
05-07-2011, 04:39 AM
lol you are my snugly roo........
:inout:
Scoot
green-lantern
05-07-2011, 05:11 AM
Oops sorry I thought we were still PMing.....
:suspect:
OBXBoost
05-07-2011, 07:31 AM
Good going, now me and the mad scientist gotta tear apart the block and replace all the piston ringlands you fried.
<3
mb7050
05-07-2011, 09:10 AM
now its confirmed he IS immortal im sure of that
mb3000
05-07-2011, 12:16 PM
I'm still waiting for some 13T times to prove otherwise. :suspect:
Amphiron
05-07-2011, 12:30 PM
Fuck man what I would give to have the resources you do to do such an amazing build. Awesome job. People are going to feel very stupid when they killed by that fiery purple rocket.
Ninja Performance
05-07-2011, 03:13 PM
Fuck man what I would give to have the resources you do to do such an amazing build. Awesome job. People are going to feel very stupid when they killed by that fiery purple rocket.
Something is wrong with that.
-Chris
Ray Pampena
05-07-2011, 07:03 PM
i wouldnt give GTPRO too much credit lol. i rebuilt that whole turbo/header kit within the first year back in 05 due to fitment and burning everything. the layout is different and the only things i used were the merge collectors and flanges. Nelson started with their kit too and changed at all around
Ninja Performance
05-07-2011, 08:09 PM
i wouldnt give GTPRO too much credit lol. i rebuilt that whole turbo/header kit within the first year back in 05 due to fitment and burning everything. the layout is different and the only things i used were the merge collectors and flanges. Nelson started with their kit too and changed at all around
Ahh, good to know.
Now, Get on with it, I wanna see some E85 runs!
-Chris
aaronatstate
05-12-2011, 08:39 AM
I just saw something on facebook about 1100whp...
Ninja Performance
05-12-2011, 08:59 AM
wait...wut...
-Chris
FeaRpb
05-12-2011, 10:02 AM
Yeah, I read that too. I want a video!
aaronatstate
05-12-2011, 11:17 AM
wait...wut...
-Chris
Yeah, picture posted of both the cars, caption reads, 1100whp or 550whp....
DocWalt
05-12-2011, 11:41 AM
Damn.... We needs pics/vids now Ray! :D
What the? I go to take a poop, and Ray has already built, installed and tuned a motor before I get out!
Fantastic work Ray, as always. I hope I make it to NG to see it!
so that's what happened to those fuel-rails i wanted to buy...
:suspect:
i'm so happy the mods have "de-cluttered" this thread. :) way to go, ray! you're an inspiration for everyone who has ever owned a 3/s!
Alex3000gt
05-13-2011, 01:35 AM
I spy a hound dog! And a Simpson's reference.
Call me a noob, but are you worried about your radiator hose being in contact with your hot charge air piping? I estimate temps up in the 400F+ range.
VR-4 0wnz j00
05-13-2011, 02:26 AM
Waiting for the 1150awhp dyno chart/video. I wish I could say my car was 450awhp, let alone having a 500ahwp and 1150ahwp one.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.