View Full Version : Looking for an inexpensive (not "cheap") brake setup
x2xtreme360
04-26-2011, 11:07 PM
My brakes are gone. I need new pads and rotors.
Why inexpensive? I'm looking for a DD setup, max 70mph, street brakes. I don't need drilled rotors. Slots are OK, but I really don't even care about them.
Just looking for some reviews and prices really. I don't need to make the mistake of getting pieces of shit that were the autozone daily special.
I will have a secondary set of pads and rotors for the track, because I know how much the track wears out brakes. I'm looking for an ECONOMY set of street pads and rotors that will stop the car when it needs to stop.
Thanks:)
TurboSinceBirth
04-27-2011, 12:58 AM
So is this out of your budget? IPS Motorsports (http://www.ipsmotorsports.net/product_info.php?cPath=3543_3550_986_1000_2977_349 6&products_id=3434)
x2xtreme360
04-27-2011, 01:20 AM
So is this out of your budget? IPS Motorsports (http://www.ipsmotorsports.net/product_info.php?cPath=3543_3550_986_1000_2977_349 6&products_id=3434)
uhh... yes?
lol, that's the complete opposite of what I'm looking for. That setup is clearly for the track. I already run the ATE superblue fluid, and I don't need the SS lines. I also don't need carbotechs for the street, although I do want some for the track, so I might consider a setup similar to that for the latter.
I was thinking more along the lines of who's used some raysbestos pads and economy line rotors from rockauto, or another similar company. For the street pads and rotors, I'm really not looking to spend much more than $100-$150.
TurboSinceBirth
04-27-2011, 01:38 AM
I figured but I thought I'd try. :p I think it's a great street setup. I have to replace my rotors. When I was looking into a set of rotors and carbotech pads it came close to $700 already so that package is priced good. I'd sell the SS brake lines to recoop some money. You might as well go to the autoparts store and get what you need there.
guido1205us
04-27-2011, 01:42 AM
So the Powerslot/HawkHPS are out of the question? I'm in the same boat and I think I'll be going this route. Without looking at my pricing sheet, I think it came out around $350 or so for 4 pads/rotors - bought the pads from PMP (cheapest I could find with free shipping) and thinking of buying the rotors off of Ebay.
BTW, off topic - sending paypal for the BOV.
i3igpete
04-27-2011, 01:50 AM
hawk hps are pieces of dog shit. i would rather run autozone duralast over those (and i do).
guido1205us
04-27-2011, 01:59 AM
Really? As in dog shit for track/street/sprint use? They have to be better than stock aren't they? My use is for weekend, summer driving with only bpu mods - would be lucky to get 500 mi/yr in on both cars.
i3igpete
04-27-2011, 11:11 AM
no, they are horrible, period. HPS pads absorb road salt and rust and turn into greased hockey pucks. I know of 3 people that couldn't even lock the brakes while standing on the brakes, while the pads had plenty of "life" left. I honestly feel safer on the street with duralast pads.
Chris@Rvengeperformance
04-27-2011, 11:18 AM
Im running raybestos pads from rockauto. The "pro" grade ones. $40 total front and rear. Works great.
Sent from my DROIDX using Tapatalk
IIRC, Polygon has some quality rear OEM replacement rotors.
It's a start.
DocWalt
04-27-2011, 12:07 PM
Just buy cheap Duralasts or something, dude.
no, they are horrible, period. HPS pads absorb road salt and rust and turn into greased hockey pucks. I know of 3 people that couldn't even lock the brakes while standing on the brakes, while the pads had plenty of "life" left. I honestly feel safer on the street with duralast pads.
You can add me to the list of people who couldn't lock up the brakes pushing as hard as I possibly could. The stock pads were better, which is REALLY saying something.
i3igpete
04-27-2011, 01:39 PM
I honestly don't know why 3/s vendors are still selling these pads. they are a clear safety hazard.
MADMarc
04-27-2011, 02:39 PM
I just got an email from.rockauto and remembered reading this thread. They have a bunch of brake parts on clearance right now. I'm not sure if this site will work for you but here is the link straight from my email for ya.
RockAuto Auto Parts (http://www.rockauto.com/RSS/vehiclefeeds.php?carcode=1434250&m=wc&l=en&html=true)
ntcmpjg
04-27-2011, 02:46 PM
I got a set of R1concept rotors for $179 shipped they are slotted only. And got some hawk pro pads for $120 shipped
Sent from my iPhone using Tapatalk
Polygon
04-27-2011, 02:53 PM
IIRC, Polygon has some quality rear OEM replacement rotors.
It's a start.
Haha, thanks for the plug! Yeah, I still have a pair of rear TT rotors, but they're for a 1st gen.
My suggestion would be some signature series blanks from Race Shopper with some Porterfield R4-S pads. The rotors are proven, good, rotors and cost about $80 per axle. The pads are like Hawk HPSs without all the suckage.
93STLTH
04-27-2011, 03:04 PM
I got a set of R1concept rotors for $179 shipped they are slotted only. And got some hawk pro pads for $120 shipped
Disc Brake Rotors & Pads | R1Concepts.com (http://www.r1concepts.com/)
Yup, they have quite a few different options. You should be able to find something in your budget with no problems.
guido1205us
04-27-2011, 03:20 PM
Im running raybestos pads from rockauto. The "pro" grade ones. $40 total front and rear. Works great.
Sent from my DROIDX using Tapatalk
Canceled my HawkHPS order with PMP and gonna go with rockauto. Seems there is a discount plus some rebate thing going. These the ones you got? Part PGD531C (F) and PGD631C (R)
i3igpete
04-27-2011, 04:48 PM
i swear, all of the hawk HPS horror stories need to be compiled and made into a sticky in the wheels/brakes forum.
Maximal
04-27-2011, 04:50 PM
RaceShopper.com signature rotors. As for pads I can't really help you there...for street driving a decent autozone pad will probably be plenty.
DocWalt
04-27-2011, 04:58 PM
i swear, all of the hawk HPS horror stories need to be compiled and made into a sticky in the wheels/brakes forum.
Some guy on a local forum was acting like a hot shot in his build thread by saying HPS pads are the shit, blah blah blah. A few months later he was wondering why his Miata's brakes sucked. /facepalm
i3igpete
04-27-2011, 05:00 PM
evolutionm.net - View Single Post - Hawk HPS pads...who runs them..opinions? (http://forums.evolutionm.net/8124518-post3.html)
:lol:
Chris@Rvengeperformance
04-27-2011, 09:12 PM
Canceled my HawkHPS order with PMP and gonna go with rockauto. Seems there is a discount plus some rebate thing going. These the ones you got? Part PGD531C (F) and PGD631C (R)
yeah I have
RAYBESTOS PGD531
RAYBESTOS PGD631
Seem to hold up to 125 MPH+ braking a couple times just fine. I don't beat on them super hard.
My previous pads were hawk hps as well and they wouldn't lock up the brakes.
My rotors are SUPER cheap ones from cleary auto:
1996 Dodge Stealth V6-181 3.0L DOHC Rear Brake Pads & Shoes, Calipers with Pads, Rotors & Drums (http://www.clearlyauto.com/catalog/1996/Dodge/Stealth/V6-181-3.0L-DOHC/Brakes-Wheel-Bearings/Rear-Brake-Pads-Shoes-Calipers-with-Pads-Rotors-Drums)
Yes, $20 a piece, they fit, and look just as good as any other chinese made rotor.
The front rotors I have are raybestos. I have 2G brakes all around.
x2xtreme360
04-27-2011, 10:41 PM
Im running raybestos pads from rockauto. The "pro" grade ones. $40 total front and rear. Works great.
Sent from my DROIDX using Tapatalk
Thanks for the review. That sounds like a pretty decent review of a cheap pad, exactly what I wanted, haha.
So the Powerslot/HawkHPS are out of the question? I'm in the same boat and I think I'll be going this route. Without looking at my pricing sheet, I think it came out around $350 or so for 4 pads/rotors - bought the pads from PMP (cheapest I could find with free shipping) and thinking of buying the rotors off of Ebay.
BTW, off topic - sending paypal for the BOV.
Don't know too much about powerslot. As for Hawk, well, you don't need me to tell you anything you've already been told, lol.
Oh, and got your paypal. I'll send them right out.
Haha, thanks for the plug! Yeah, I still have a pair of rear TT rotors, but they're for a 1st gen.
My suggestion would be some signature series blanks from Race Shopper with some Porterfield R4-S pads. The rotors are proven, good, rotors and cost about $80 per axle. The pads are like Hawk HPSs without all the suckage.
Those sig series from raceshopper have been in the back of my mind for awhile now.
Polygon
04-28-2011, 12:18 AM
Those sig series from raceshopper have been in the back of my mind for awhile now.
Yeah, you can't beat them for the price. I went to the R1 rotors on my car, but simply because they were zinc plated and I was so sick of rusty rotor hats. That would be my only complaint with the sig series. Functionally, the are the best OEM sized replacements for the money.
lawdogg
04-28-2011, 02:08 PM
For cheap good street brakes, I'll file a concurring opinion with all these guys. I'd get autozone rotors and carbotech bobcats, run Motul RBF600 and call it a day.
I ran Hawk HPS pads for a while, they were pretty bad on the street (almost rear ended a buddy's Sti once because I couldn't stop as quickly as he did), and quickly became bricks on the track (stopping power literally went to 0 and pedal became rock hard after 2 laps, I'm surprised they didn't start chunking).
whitedragon
04-28-2011, 04:18 PM
Everyone is talking rotors and pads (R1Concepts FTW!), but did you upgrade to SS brake lines yet?
x2xtreme360
04-29-2011, 12:39 AM
Everyone is talking rotors and pads (R1Concepts FTW!), but did you upgrade to SS brake lines yet?
Not yet. I plan to sometime, but the stock lines are all I've needed thus far.
R/T93
04-29-2011, 02:20 AM
Get the R1 rotors and some carbotech Bobcats for the front and the suggested cheaper reybestos pads for the rears, buy some synthetic DOT4 valvoline at the local auto parts store, that setup wont break the bank and will stop as well as you NEED it to, for sure.
92EuroDiamante
04-29-2011, 05:21 AM
I've gotta agree on the HPS pads.
I got them a few years ago along with some performance rotors from one of our vendors (forgot which one :p) and in a very short amount of time they started doing that as well. Its a strange feeling, you hit the brakes, you can feel the caliper/pads bite down, but there you are still sliding towards someones rear bumper :p.
How long till yours started acting like this Pete? I dont think I had mine more than a few thousand miles in all fair weather before I noticed it.
whitedragon
04-29-2011, 09:20 AM
Not yet. I plan to sometime, but the stock lines are all I've needed thus far.
The SS lines are one of the better bang for your buck upgrades as far as brakes are concerned. If your stock pads and rotors are fine as is, stainless lines are a hella good investment, and I believe only 120 or so from 3SX.
i3igpete
04-29-2011, 10:34 AM
How long till yours started acting like this Pete? I dont think I had mine more than a few thousand miles in all fair weather before I noticed it.
Oh I saw this happen with dave's car. he finally switched when I told him to try to lock the brakes and he couldn't.
Geordon
06-13-2011, 12:07 AM
Would brand new Raybestos Pro grade pads for front and rear be good enough for the NG11 autocross and road courses? These are almost nothing after the current rebate offer, versus $300 for Carbotech Panther Plus/Bobcat front/rear from SCE.
DocWalt
06-13-2011, 12:26 AM
I wouldn't use them on the road course unless you're just going to cruise around the track.
i swear, all of the hawk HPS horror stories need to be compiled and made into a sticky in the wheels/brakes forum.
ever use wagner thermo-quiet ceramic pads?
I just recently replaced my stock rotors and pads with DBA 4000 series rotors (from 3SX when they carried them) and Hawk pads, couldn't work out why the performance was worse than stock and thought I needed to bleed the system. I guess the poor braking was due to the crappy Hawk pads, definitely gonna change them when I get around to it, it's a shame they're so damn horrible...
Geordon
06-13-2011, 08:26 AM
All the Hawk stories explain a lot for my current setup, which I have been running for a little over 3 years:
> 1992 DODGE STEALTH 4WD/AWD
> (front) SIGNATURE SERIES ROTOR
> (rear) SIGNATURE SERIES ROTOR
> (front) HAWK HPS BRAKE PADS
> (rear) SP STREET PLUS BRAKE PADS
The brakes always seem to be lacking something when I want to do any more than slow down (e.g., stop), but I am told the pads are fine when they are checked. Those HPS must really be the weak spot.
With 15,000 to 20,000 daily driver mi on the rotors and pads, do you think I might be able to get away with just replacing the fronts pads with Carbotech Panther Plus for the NG11 road course?
i3igpete
06-13-2011, 09:42 AM
for road course, i would recommend at least XP8's in the front. panther plus is good when cold, but can't handle as much heat. better to err on the side of caution if this is your first time out.
TUFFTR
06-13-2011, 10:04 AM
Just purchased a set of "Remsa" pads. now for those of you who are familiar with TRW Lucas pads, these are made by the same company, however with better dust characteristics then the TRW street performance range. Fuck I hate these hawk pads. They are dangerous to say the least. I upgraded calipers and rotors and had worse stopping power!
I've now installed a brand new PBR master cylinder......there should be not ONE excuse soon as to why the brakes on this car cant flip the car the fuck over when stomping on the pedal!
bridge
06-13-2011, 11:17 AM
for road course, i would recommend at least XP8's in the front. panther plus is good when cold, but can't handle as much heat. better to err on the side of caution if this is your first time out.
This sir
R/T93
06-13-2011, 12:06 PM
I have had good results with the AX6 (never had them fade even at 1200+ degrees) but think I will try XP10's in front and XP8's in the rear when these ax6's wear out, they only last 3 track days :(
Maximal
06-13-2011, 12:45 PM
To a point brakes go with your skill level. Last year the AX-6's were alright on the NG roadcourse for me. However once I get a bit of experience and tried them at Watkins Glen they faded in half a lap. Now with even more experience I'm getting the XP-8's to fade.
Don't cheap out on brakes people, it's probably the last thing you want to be without on a road course. If you're spending the money for the road course buck up and get some decent pads.
Geordon
06-13-2011, 01:34 PM
Will it be okay for me to install the new XP-8 pads before my 4 hour drive down to Indy? Or should I just bring them with me and get help installing them in the parking lot? I haven't actually replaced a pad all by myself before.
Secondly, must I swap out my rear pads, too, or can I get by with what I have left on my DDs?
This will be my first time auto-X or road course, so I will be a complete newbie, running on worn all-season Toyo Proxes 4.
Maximal
06-13-2011, 03:15 PM
Will it be okay for me to install the new XP-8 pads before my 4 hour drive down to Indy? Or should I just bring them with me and get help installing them in the parking lot? I haven't actually replaced a pad all by myself before.
Secondly, must I swap out my rear pads, too, or can I get by with what I have left on my DDs?
This will be my first time auto-X or road course, so I will be a complete newbie, running on worn all-season Toyo Proxes 4.
Driving on them will be fine, I daily drive my XP-8's they're just a bit noisy and dusty. As for the rears it's not ideal but will probably be ok since the fronts take most of the abuse.
Another thing with carbotech pads is that they need to be on a fresh rotors, either new or turned.
Geordon
06-13-2011, 05:38 PM
Looks like I am screwed, as Carbotech pads are made to order, and may take 1 to 4 weeks from the places I have been checking. I need something this week for NG11 :(
Scratch that. I just called IPS and they have them in stock. Doesn't look like I can get the R1 Concepts rotors before next week, as the blanks are a day out plus another 4 business days to ship from California, so may just get cheap blanks from IPS.
R/T93
06-13-2011, 05:52 PM
Call up philip from Supercar-Engineering, his # is on his website
Maximal
06-14-2011, 12:42 PM
I've never had an issue getting carbotech pads before...last time I ordered them from supercar they shipped driectly from carbotech.
As for rotors look at the signature series at Discount Performance Brakes - Brake Pads & Brake Rotors- RACEShopper.com (http://www.raceshopper.com).
Geordon
06-14-2011, 12:47 PM
Maximal, thanks for the advice. I currently use the Signature Series, and ordered a new front set last night. They are going out today from Florida. Nearly twice the price of R1 Concepts, but at least I know they work. IPS Motorsports told me yesterday they had XP8 in hand, so I ordered those last night, as well. Ohio to Michigan shouldn't take too long. Now, it is off to BestBuy to pick up a pair of Talkabouts.
You are correct that SCE drop ships from Carbotech. Philip replied last night after I was in contact with IPS.
Jenkins
06-14-2011, 05:16 PM
I have the Hawk HPS pads on my car and now I'm scared to use them after hearing about these horror stories. I can lock my wheels up no problem, but I can say they don’t like getting hot at all. When these pads run out I planned on switching to carbotech with a new set of blank rotors.
i3igpete
06-14-2011, 06:38 PM
they will turn into hockey pucks long before they wear out. trust me.
TUFFTR
06-14-2011, 08:10 PM
I have the Hawk HPS pads on my car and now I'm scared to use them after hearing about these horror stories. I can lock my wheels up no problem, but I can say they don’t like getting hot at all. When these pads run out I planned on switching to carbotech with a new set of blank rotors.
Agree with the comment above this one.....Ditch those pads. I've used a few different pads in my time (Mainly australian brands) and These have been by far the worst ones.
There going to get nothing less then thrown in the bin. Just got my new pads yesterday CANNOT WAIT to put them in tomorrow!
Slacker1357
06-28-2011, 06:18 PM
I have stock calipers on my SL and EBC yellow stuff with EBC black dash, and 3GD slotted rotors worked great for me at the track, and still work fine with city driving.
No brake fade, and moderate dust
speedy25
06-29-2011, 05:35 PM
A little extra experience from my side- I used Autozone pads for years just because I was being a cheap-o. My Chevy van has had at least 4 sets over the years! I didnt realize what I was missing until I put a REAL brand on my Nissan after the AZ pads were worn out.
Carbotech pads went on our teams 24 hour car after we had done some track time with some old pad. WHAT A DIFFERENCE! They really are great. At least for track use.
I have PB Axxis pads on my GT right now. No trouble with fading at IRP. I did come back in with smoke coming off the calipers. Rotor temp measured was 738° F. Supercar Phil and I discussed brake fade and pad temp. As I remember from him 1000° + for a race prepped car, and up to 800 for a street car. I dont think I have ever seen temp specs on pads, but now I know what I can do, so I'll look next time I buy.
A shame about the Hawk pads. They are made near me in Medina OH. I'll have to chat with the reps when I see them at a trade show.
I did find slotted rotors that werent made in china for about $50 ea. I dont remember where I got them or the brand.
Good thread. Worth looking at all the pages. Keep it up guys!
-SP
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.