View Full Version : amazon NA downpipe
DarK_sTyLe
04-18-2011, 06:19 PM
does anyone have this
Amazon.com: 94-97 Mitsubishi 3000GT Non Turbo Stainless Steel Exhaust Down Pipe 95 96: Automotive (http://www.amazon.com/94-97-Mitsubishi-3000GT-Stainless-Exhaust/dp/B0043SUYMO)
DarK_sTyLe
04-18-2011, 06:20 PM
it looks like its going to fit properly... is it worth the money?
x2percentmilk
04-18-2011, 06:40 PM
no, no, no.
The pipe is designed wrong, its the same as the ebay ones. the back bank is actually directed INTO the front bank because of the way the pipe is bent. After we all figured that out and started talking about it, they just took different pictures so you cant tell what angle its at.
Amphiron
04-18-2011, 06:47 PM
Wonder if it would still be cheaper to cut it off clean it up and have it re-welded the proper direction. But then the fitt would be even worse...
How can someone be so dumb to design the pipe like that? Thats so much turbulence it's not even funny. It would also send the pulses of the exhaust into eachother, which is a huge no no. Do NOT buy this exhaust.
GTwizard
04-18-2011, 07:48 PM
Well, although not correct, they fit better now with the 2 flex sections. But there are better ones out there. If the idea of the exhaust bent wrong bothers you, I bet there "is a little" improvement over stock. How much are you hoping to get with ones that is bent correctly? If you are looing for performance, than you should be going headers. Than the headers won't do much by themselves, so other mods are needed to wake those up. Just how far you plan on taking the project. If your are looking for big power, these motors take lots of coaksing and cash to make them sing. So, that being said. If your not looking to get invoived with a money pit. This exhaust down pipe may be just the inexpensive ticket you are looking for.
DarK_sTyLe
04-19-2011, 02:30 AM
thankzz guys am not buying it then,,,,, but am looking to improve my exhaust system this is what i have in mind from engine to muffler tip(3sx long tube headers ,,test pipe , resonator (since i have an NA), from there a Y-pipe with 2 N1 mufflers all this on 2.5" tube what do you guys think?
DarK_sTyLe
04-19-2011, 02:35 AM
http://i52.tinypic.com/eukfhl.jpg
something like this
GTwizard
04-19-2011, 04:58 AM
That's all you need. But if you do headers, The OBX is a better fitment. I know. Been there done that. At least used to be. Had to hammer the dog shit out of the last 3SX I installed for someone. My OBX bolted up with out a hitch.
So tell me. What system is that posted above. It looks sweeeeet. But go 3".
GTwizard
04-19-2011, 05:18 AM
This is the sound of our 3" in from header to Flow master, than twin 2.5s out from that. No other mufflers or resinators.
http://www.youtube.com/watch?v=r0JsdftRv0k
green-lantern
04-19-2011, 07:55 AM
no, no, no.
The pipe is designed wrong, its the same as the ebay ones. the back bank is actually directed INTO the front bank because of the way the pipe is bent. After we all figured that out and started talking about it, they just took different pictures so you cant tell what angle its at.
I was looking at it before I read your post and I was like WTF!?!?!?!?!? That pipe looks like it’s heading the wrong way!!! :lo5l: Definitely stay away from that pipe. I can’t believe they actually made that. It would seem somebody down the line would say hey this shit is wrong.
n2nsanity
04-19-2011, 12:20 PM
yeah looks the same as the ebay downpipe
at least ebay one is only 120 shipped
i have the ebay one
haven't put it on yet as that curve was bothering me
also it didn't have the o2 bung, so i need to add that still
green-lantern
04-19-2011, 12:34 PM
You have to think some stoned guy made a big run of those pipes on night shift before QA came in and had him sent for a drug test. No F-ing way somebody designed the pipe that way.
Thats almost like this.
http://www.eugeneleafty.com/DEI/Nebraska%20GM%20Modern%20Muscle%20%20View%20topic% 20-%20Turbo%20Questions%20(pg%201)_files/mht2993(1).jpg
DarK_sTyLe
04-19-2011, 07:07 PM
That's all you need. But if you do headers, The OBX is a better fitment. I know. Been there done that. At least used to be. Had to hammer the dog shit out of the last 3SX I installed for someone. My OBX bolted up with out a hitch.
So tell me. What system is that posted above. It looks sweeeeet. But go 3".
i was going at exhaust systems in google and a came across this i read that is from a RTTT 3" pipe to a Y-PIPE and N1 mufflers this is a custom made cat-back
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.