View Full Version : Checking out her new digs
Ninja Performance
04-15-2011, 04:43 PM
After a "spirited" cruise (only 30psi) down some country roads...She got to be the first in. She can share though.
http://www.ninjaperformance.com/images/npgaragevr41.JPG
http://www.ninjaperformance.com/images/npgaragevr42.JPG
http://www.ninjaperformance.com/images/npgaragevr43.JPG
-Chris
oohnoo
04-15-2011, 05:54 PM
DANG....Starting up something on the side or is this going to be your personnel garage :)
hahah there an echo in here
TwoXist
04-15-2011, 08:09 PM
Looks a bit drafty..Although, i am jealous and wish i had some space like that.
TurboSinceBirth
04-15-2011, 08:21 PM
If I had the garage you'll have when you're done, then I'd be done real quick with my car. The motor and tranny is coming back out, getting fixed, and going back in. :sad:
How many cars are you going to have in there at a time? 3 maybe 4? By the time you put a lift and all the other equipment in there it isn't as spacious. Haha.
Ninja Performance
04-15-2011, 09:02 PM
DANG....Starting up something on the side or is this going to be your personnel garage :)
hahah there an echo in here
Haven't you been payin attention? Ninja Performance ring a bell LOL
Yes, this is the new service garage. We will be building the walls in the next coming weeks.
-Chris
Granny
04-15-2011, 10:45 PM
Beautiful....
you need to get some home-depot store-shelving now. :)
green-lantern
04-16-2011, 01:33 AM
Looks a little small and drafty. I'd rent part of my garage out to you but somehow I've managed to fill the bitch up in less than a year. :lo5l:
mcshooter
04-16-2011, 08:24 PM
looks like you folks are getting some nastry weather.. good luck.. how far are you from denton n.c ??
CoopKill
04-16-2011, 08:34 PM
How did you get her in there without the 4x4 ground clearance? lol
man...i can't wait to see everything up and running, chris. i'd be half tempted to buy a stealth tt & ship it to you to get it ATX converted; it'd be the first time any shop has ever done that type of conversion. ;)
Ninja Performance
04-16-2011, 11:13 PM
How did you get her in there without the 4x4 ground clearance? lol
It's level to the ground in the front.
-Chris
I think maybe you need to make it larger :p
I was thinking two story (sleep upstairs when your in the bad books) kitchen and crapper/shower at one end (for cleaning up before going into the house)
Sin'sVr4
04-18-2011, 08:27 PM
chris how much did just that with the concrete cost you? what are the dimensions. Im thinking about building a shop next to my garage so I can keep the vr4 and jet ski's in so my wife can park in the garage.
Ninja Performance
04-18-2011, 09:44 PM
chris how much did just that with the concrete cost you? what are the dimensions. Im thinking about building a shop next to my garage so I can keep the vr4 and jet ski's in so my wife can park in the garage.
30X36 with a 12" deep 12" wide footer (south carolina, don't have to go deep). The slab including excavating, forms, concrete (fiber strand mix) and finishing (from unlevel grass site to completed pad) was $3600.
-Chris
green-lantern
04-18-2011, 10:40 PM
Not bad at all. Keep us updated on the progress.
Ninja Performance
04-19-2011, 09:02 AM
man...i can't wait to see everything up and running, chris. i'd be half tempted to buy a stealth tt & ship it to you to get it ATX converted; it'd be the first time any shop has ever done that type of conversion. ;)
I can do that. Wouldn't be the first though. Not by a long shot.
-Chris
I can do that. Wouldn't be the first though. Not by a long shot.
-Chris
this is news to me! i've never heard of a tt being atx swapped. atx > mtx conversions galore; a few fwd > awd conversions; and a select few fwd atx > awd atx conversions running around....but i've NEVER heard of (or seen a build thread) on an awd tt mtx > awd tt atx conversion.
Ninja Performance
04-19-2011, 11:25 AM
this is news to me! i've never heard of a tt being atx swapped. atx > mtx conversions galore; a few fwd > awd conversions; and a select few fwd atx > awd atx conversions running around....but i've NEVER heard of (or seen a build thread) on an awd tt mtx > awd tt atx conversion.
Long ago, many years past, I did it to T4. ATX AWD conversion on a 91 VR4.
And I am pretty sure GZP has done it since.
JDM AWD ATX and TC with a one off driveshaft. I used 2 toggles for the 4 gears and a shifter out of a Galant (junkyard and couldn't find a 3S ATX in the pull a part at the time.
-Chris
FeaRpb
04-19-2011, 11:27 AM
Wow that is a killer price for that.
Ninja Performance
04-19-2011, 01:40 PM
Wow that is a killer price for that.
$3600 included 22 cubic yards of the fiber strand concrete. All labor, the guy supplied all the equipment (including front loader and labor) and forms, vapor barrier etc. Power troweled smooth then saw cut control joints. All done $3600. 1100 sq ft. I thought it was a good deal. It's dead level and flat. Even the installers of the structure were surprised that they didn't have to do any leveling at all. They said it was so true it made the job very easy.
-Chris
Long ago, many years past, I did it to T4. ATX AWD conversion on a 91 VR4.
And I am pretty sure GZP has done it since.
JDM AWD ATX and TC with a one off driveshaft. I used 2 toggles for the 4 gears and a shifter out of a Galant (junkyard and couldn't find a 3S ATX in the pull a part at the time.
-Chris
nice...but i've never seen anyone do it using the stock TCU. :)
beepbeep
04-19-2011, 05:29 PM
http://www.ninjaperformance.com/images/npgaragevr41.JPG
Awww, her's all lonely. She needs a friend.
green-lantern
04-19-2011, 06:26 PM
When do you plan to enclose it up and all that stuff. In other words when will it be open for service?
Ninja Performance
04-19-2011, 06:36 PM
When do you plan to enclose it up and all that stuff. In other words when will it be open for service?
Little stuff I am doing now for some local members. We are looking at a few weeks to get it closed in. We are doing it ourselves and running in 12 different directions every day getting things sorted, started, sales, shipping etc. It's crazy but not complaining. The garage is "one" of the top priorities. But then the phone rings, or something needs to be built to ship etc LOL.
Once it is enclosed we will have an official Grand opening party :) BBQ in the country and camp out!...you sure have a pretty....oh nevermind...that was supposed to be my inside posting voice.
-Chris
HilbillyHomeboy
04-21-2011, 04:49 PM
That's a nice unit...hu..heh.huhhuhh :D
As the others have said, you kicked ass on that pad. Excellent deal.
Jeremy
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.