View Full Version : Where to find halos that fit ?
mb7050
04-13-2011, 09:12 AM
As the title say Where did people buy theirs from??
dpartinvr4
04-13-2011, 11:45 AM
http://i888.photobucket.com/albums/ac81/dpartinvr4/2011-02-12184846.jpgi got 90mm halos from ebay. " they're mounted upside down because i was just seing how the fit.
ictponder
04-13-2011, 12:15 PM
Will the plastic/glass covers also fit w/the 90mm?
dpartinvr4
04-13-2011, 12:18 PM
Will the plastic covers also fit w/the 90mm?
yes, if you move the lenses back via the three adjustment bolts .
EDIT: if by plastic cover you mean the "insert" inside the headlight, then see above. if you mean "the plastic cover around the halo" then yes, that's what mine are.
2fnloud
04-13-2011, 12:42 PM
Like these? (http://cgi.ebay.com/Angel-Eye-Halo-CCFL-90mm-WHITE-rings-/350324871434?pt=LH_DefaultDomain_0&hash=item5190fd510a)
dpartinvr4
04-13-2011, 12:50 PM
Yes, the lenses are the same size.
dpartinvr4
04-13-2011, 12:54 PM
http://i888.photobucket.com/albums/ac81/dpartinvr4/2011-02-12184829.jpgthey are smaller than the metal rings.
http://i888.photobucket.com/albums/ac81/dpartinvr4/193086_192718487432415_100000827963949_418834_8518 1_o.jpg in glass :)
ictponder
04-13-2011, 01:13 PM
Gonna order 4 white rings but not gonna robo mod. These will work perfectly hooked up to my fog light switch as I don't have fogs anymore. Glad this thread popped up.
2fnloud
04-13-2011, 01:49 PM
If I had the nerve to open up my glass headlights I would do the same thing but wire them up to my running lights.
dpartinvr4
04-13-2011, 02:18 PM
Gonna order 4 white rings but not gonna robo mod. These will work perfectly hooked up to my fog light switch as I don't have fogs anymore. Glad this thread popped up.
like i said, all you have to do is turn the 4 adjuster bolts on the back of the casing, and the rings will fit without a problem. I think chargerx or something like that has his done that way. he painted the tunnels, and it looks interesting light up.
mb7050
04-13-2011, 04:04 PM
woohoo thank you very much just ordered som lights :D
2fnloud
04-13-2011, 08:50 PM
http://i888.photobucket.com/albums/ac81/dpartinvr4/2011-02-12184846.jpgi got 90mm halos from ebay. " they're mounted upside down because i was just seing how the fit.
Do the set of halos you have have a plastic cover to them?
dbest671
04-13-2011, 08:54 PM
^ Yes his has the plastic cover.
If you don't want the plastic cover, look for 80mm halos. I haven't found any white ones since the place in Germany stopped carrying them. That is why I switched to the 90mm ones with the plastic casing. I actually like the eBay ones better. If I wasn't so lazy, I would bust open the 99's again and replace the halos with the 90mm eBay ones.
2fnloud
04-13-2011, 08:57 PM
Thank you April, that is exactly what I was hoping to read.
dbest671
04-13-2011, 09:12 PM
Not a problem, it really isn't that hard to open up the headlights. Here is a write-up I did way back when. There is more information on 3si, the thread over here didn't get much attention.
http://www.3sgto.org/f20/robo-halo-headlight-mod-instructions-w-pictures-1936.html
if PMP ever gets those clear 99 covers to market, i'll have you robo mine, april. :)
dpartinvr4
04-13-2011, 09:47 PM
if you really like sanding and buffing, I can tell you how to get 99's clear. lol
dbest671
04-13-2011, 09:55 PM
if you really like sanding and buffing, I can tell you how to get 99's clear. lol
I've already refinished a set of 99's. The clear was peeling on the outside. I would NEVER try to get the paint off from the inside of 99's. You think regular lexan are a b*tch, try adding the bumps on the 99's. And I will never try to refinish another set of 99's.
dpartinvr4
04-13-2011, 10:01 PM
getting the paint off is easy, it's getting the haze out that's a pain.
...and you'd STILL be left with rings. no thanks. i'll just wait for a good set of reproduction covers (and hopefully, some slick-looking r/t tails to match).
dpartinvr4
04-13-2011, 11:52 PM
i'm still going to endeavor to make the z06 inside molding for clear lenses.
i'm still going to endeavor to make the z06 inside molding for clear lenses.
how is it different from regular c6 lights?
dpartinvr4
04-14-2011, 09:13 AM
idk, i'm just saying, like instead of how our "insert" is the same as the lense, i want it to be "depressed, and mold around the projectors.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.