PDA

View Full Version : What is the normal OIL Pressure on 91 ES



DarK_sTyLe
04-12-2011, 12:08 AM
What is the normal OIL Pressure on 91 ES?

RL7
04-12-2011, 04:35 PM
11.4 psi or greater at curb idle speed with oil temp 167-194F using proper oil weight.

Ninja Performance
04-12-2011, 05:49 PM
Your oil weight, RPM, coolant temp (oil temp) all play a role in oil pressure. What PSI are you getting, how are you testing it, and what are the other parameters?

-Chris

DarK_sTyLe
04-12-2011, 05:55 PM
Your oil weight, RPM, coolant temp (oil temp) all play a role in oil pressure. What PSI are you getting, how are you testing it, and what are the other parameters?

-Chris

well am getting low oil pressure on the stock gauge,,, am running 5w-30 with the RPMS set to normal (750 + -)

Emilie@GZP
04-12-2011, 07:15 PM
low oil pressure on the stock gauge, at idle, is normal, as long as it's not buried at the bottom.

General rule of thumb, if it's about 2-3 ticks above the bottom big tick (towards the middle of the gauge), at cruising ~2-3k rpm's when warm, you are fine.

Ninja Performance
04-13-2011, 11:16 AM
well am getting low oil pressure on the stock gauge,,, am running 5w-30 with the RPMS set to normal (750 + -)

What is "low"?
Is this when it is warmed up?
Does it go up as rpms go up? What does it go up to versus RPM?

-Chris

DarK_sTyLe
04-13-2011, 08:42 PM
What is "low"?
Is this when it is warmed up?
Does it go up as rpms go up? What does it go up to versus RPM?

-Chris

when the car is cold the temperature gauge is center half way between low and high as the car gets temperature the gauge tick goes down if i rev to 2k rpm it goes up but it doesnt stay

SOHC
04-13-2011, 11:28 PM
I don't trust the factory gauge mine is usually at 1/4 of the way and sometimes it goes 1/2 but never higher.

Ninja Performance
04-14-2011, 11:57 AM
when the car is cold the temperature gauge is center half way between low and high as the car gets temperature the gauge tick goes down if i rev to 2k rpm it goes up but it doesnt stay

Don't trust an old sender with the old loose dirty slip on connector. Test with an oil pressure tester. But it sounds like it is where it should be.

-Chris