View Full Version : So I hotwired my fuel pump and then.......
92EuroDiamante
04-11-2011, 12:41 AM
Ok, so as some of you read in my other thread, I was having some issues with a faulty fuel pressure sensor.
So while dealing with that I hotwired my fuel pump.
30amp relay, 8g wire. Wired off the stock relay thing (I know its not a relay, the unit that NAs have but the VR4s dont). Very confident I did everything right.
So I started the car dozens of times, everything was fine.
I drove the car a few miles and everything was fine.
Well today I decided to go for a longer ride. I took it on the highway and then slammed it. It got up to 4kish and all hell broke loose.
My relay thing (the little gold box) started going nuts, it was clicking like mad.
My RPMs were going crazy, My stock coolant temperature gauge started going up and down, the car was very unresponsive and felt like it was gonna die.
So I pulled off the highway and into a lot.
I let the car cool off, checked the engine bay for anything weird. Thinking it was the aftermarket hotwiring relay that was clicking, I removed that and wired the fuel wire to the stock relay. No improvement, I realized that wasnt the issue.
I started it back up and whenever I hit the brakes it really wants to die. I have to slam it into gear to get it to not die. I managed to get it the short distance home (it died a few times) with the relay box clicking like mad.
I know its not the fuel pump because the car idles fine, and when the relay box quits going nuts it will get up and go.
Any ideas? Did I miss something by hotwiring the stock relay, did I overstress it?
Luckily a guy has the stock unit locally for cheap but I really would like to know what is going on. Hoping I didnt damage anything. Doubtful as timing is still true and it never got past 4k.
Steve '92ES
04-11-2011, 02:19 AM
Boy that kind of sounds like maybe your alternator died, what with the gauges going nuts and the relay clicking.
Do you have a voltage gauge, or a meter you can hook up, to see what the battery voltage is doing when things go wild?
92EuroDiamante
04-11-2011, 02:41 AM
Yes I do have a voltage gauge. Voltage jumps around but that is because RPM is jumping around and the car is stalling.
Alternator is fine, its a freshly built H/O unit. Very thankful for it since I had to crank the car a crapload of times to get it going while the fuel pump relay was going nuts!
I know the problem is the fuel pump relay/ whatever it is called in this car. I just dont know what would cause it and if my hotwiring screwed it up. No sense replacing it if it will just blow next time I hit the gas hard.
TUFFTR
04-11-2011, 03:04 AM
Its your battery that counts when cranking....not your alternator...just wanted to point that out.
TUFFTR
04-11-2011, 03:05 AM
Check the ground from the new relay dude. Just double check all the wiring.
92EuroDiamante
04-11-2011, 03:25 AM
I know that
but if I'm gonna be cranking away I want to make sure my battery is charged and that its getting the most charge possible in the 10 seconds before it stalls :p.
The stock alternators on the diamantes are not very good. What are the TRs equipped with from the factory?
92EuroDiamante
04-11-2011, 03:26 AM
Check the ground from the new relay dude. Just double check all the wiring.
It still did it when I eliminated the new relay and just used the stock relay.
Steve '92ES
04-11-2011, 03:29 AM
Voltage jumps around but that is because RPM is jumping around and the car is stalling.
Shouldn't jump that much. Even if the car stalls you should still have battery voltage. If it's dropping under 10v you've got a problem.
BTW, is this a turbo or NA? Also, I'm a little confused by this
Wired off the stock relay thing (I know its not a relay, the unit that NAs have but the VR4s dont)
Both have the MFI relay behind the passenger's side console. The turbo's also have another relay under the aircleaner that the NA's don't. Is that what you're talking about?
Steve '92ES
04-11-2011, 03:32 AM
Oh wait. This is a Diamante?
I'm not sure I know what I'm talking about then...
Sorry...
92EuroDiamante
04-11-2011, 03:42 AM
Shouldn't jump that much. Even if the car stalls you should still have battery voltage. If it's dropping under 10v you've got a problem.
BTW, is this a turbo or NA? Also, I'm a little confused by this.
Both have the MFI relay behind the passenger's side console. The turbo's also have another relay under the aircleaner that the NA's don't. Is that what you're talking about?
Didnt drop that much. I consider the change by a full number and the rate at which it was changing jumping around. sorry if I gave a wrong impression.
Yes I mean the MFI, forgot the term for it. Oh my bad, its been a while for me since I have worked on one.
as far as it being a Diamante, They are basically identical to 3/s other than body obviously. Other than some different suspension options and No 6 speed they were available in the same configurations. The one in question is N/A.
TUFFTR
04-11-2011, 04:01 AM
I know that
but if I'm gonna be cranking away I want to make sure my battery is charged and that its getting the most charge possible in the 10 seconds before it stalls :p.
The stock alternators on the diamantes are not very good. What are the TRs equipped with from the factory?
TR SOHC 12v's came with an 80A, Verada's came with a 90A, But I've got the 110A on the DOHC engine. Remember at idle the alternator is hardly putting any charge back into the battery, and full charge at around 3000RPM. At cranking RPM of 300RPM thereabouts your alternator will be putting in 1/100th of what the starter is taking from the battery! My Diamante 30RS has the 110A, from the looks of it never been rebuilt and on 260K's
ANYWAY!
So, trouble shooting procedure....You use the standard relay (all other hotwired wires are still in tact) and it starts clicking, so it sounds like its dropping earth constantly. I had this happen to a central locking relay when i fed power into a prong I wasn't supposed to, had to get another relay.
I would grab another relay first (if you want a few spare I have some here you can have, although halfway across the world:P) and go from there. It is possible somehow the relay is damaged.
92EuroDiamante
04-11-2011, 04:05 AM
Nice choice, I used the shell from a 3/S to upgrade mine as well.
Definitely, would be pulling way more to start it than it would be making while starting.
Yeah, some guy by me has one for 30 bucks, pretty reasonable.
Would adding a relay after the MFI really damage it like that? The MFI seems toast. Even when I hook everything back up stock and eliminate the hotwiring relay (other than the 8g wire that now goes to the fuel pump), the stock MFI clicks like crazy and the same problem happens.
I also swapped out a 30A relay I was using for nitrous with the one that was in the hotwire circuit just to see what would happen and the same thing happened. Its definitely the MFI. I can hear and feel it click.
I hate when things break right after a related part is modified. makes me hesitant to just replace them because it could just happen again.
Hans@GZP
04-11-2011, 10:05 AM
Check your engine computer.
GTOJOE
04-11-2011, 10:15 AM
Does your stock system have a unit like the 3/s that provides low power at idle then full power at revs? perhaps the system is switching between low power and high power and causing the relay to switch on and off? when doing the hotwire on a 3s part of the process is to bypass the resistor [low voltage circuit] so the relay has constant 12 volts.
92EuroDiamante
04-11-2011, 12:21 PM
Does your stock system have a unit like the 3/s that provides low power at idle then full power at revs? perhaps the system is switching between low power and high power and causing the relay to switch on and off? when doing the hotwire on a 3s part of the process is to bypass the resistor [low voltage circuit] so the relay has constant 12 volts.
Yes, it is the exact same unit.
When looking up the part number on the unit, everything that popped up for sale was off of 3/s.
As far as wiring it, I wired it the exact way shown on all the instruction sites/wiki. Double checked it after it failed too.
Could I have used the wrong relay?
I want to figure that out because the stock MFI is definitely screwed and I dont want to go through that again
92EuroDiamante
04-11-2011, 12:26 PM
This is the way I wired it
http://www.stealth316.com/images/fprw-schematic.gif
crap, seems it wont let me post the pic.
here is the link
http://www.stealth316.com/images/fprw-schematic.gif
Did you wire from the battery or from the MPI relay? If you think the relay you used is bad, you may as well replace it with a new one. If you wired it to the MPI relay, you may have pulled more amperage through it than it wanted and fried something.
92EuroDiamante
04-11-2011, 04:48 PM
Did you wire from the battery or from the MPI relay? If you think the relay you used is bad, you may as well replace it with a new one. If you wired it to the MPI relay, you may have pulled more amperage through it than it wanted and fried something.
I wired the aftermarket relay to the battery.
Sorry if I wasnt clear, since there are two relays involved.
The MPI relay is the one that is malfunctioning and going nuts. It does this in stock configuration with the hotwire relay removed and with the hotwire relay in place as well.
I just dont want to put the new one in and fry it too if I did something wrong.
Hopefully my computer is ok like Hanz mentioned. Anyone local want to try my MFI/MPI relay and see if it works for them. Then I would know if my ECU is fried.
Steve '92ES
04-11-2011, 05:09 PM
I don't mean to be argumentative here but I'm getting really confused.
You say this is an NA, but that you have the hi/low relay? NA's don't have that, only the turbo's. (at least with 3S's, I don't know about Diamante's)
On the other hand if you DO have that second relay both the hi and the low wires are Black/blue.
I can't tell from you're diagram exactly what you wired to, because the colors are the same.
Also, you say
Thinking it was the aftermarket hotwiring relay that was clicking, I removed that and wired the fuel wire to the stock relay.
Does this mean you returned everything back exactly to stock, or did you wire it in somehow with your own wiring?
So, to sum up,
This is an NA with a hi/low relay?
Which relay did you wire to?
Where, exactly, did you tap the Black/blue wire?
You returned it to dead stock, and it still has the problem?
92EuroDiamante
04-11-2011, 06:00 PM
Sorry,
I thought you were asking if it had the same relays as the 3s and mentioned the hi low so I said yes. It has the same relay as the NA 3s.
part number E8t07871
Yes that is what that means. I removed the relay and connected the wire to the fuel pump back to part number E8t07871.
The only difference from stock at that point would be the non stock pump, and the non stock wire to the pump.
I wired to the MFI/MPI, part number E8t07871. Was this my mistake?
Yes I returned the wiring to stock and the relay E8t07871 still goes nuts.
92EuroDiamante
04-11-2011, 06:22 PM
Ok,
I just plugged back in the MFI, relay E8t07871, stock configuration and the car wont start at all.
It catches a bit but wont start.
Would the way to diagnose if it is the MFI or ECU be to wire the fuel pump to 12v and run a switch to turn it on right before I start the car?
Steve '92ES
04-11-2011, 06:26 PM
Most people put the hotwire relay right by the fuel pump, and pull the Black/blue wire out of the fuel pump connector and use it to trigger the hotwire relay. You then replace it with a wire from the hotwire. That's the only modification to the stock wiring you need to do, other than to put a jumper in the hi/low relay if so equipped. (you of course still have to run a power wire to the hotwire relay, but that's in addition to the stock wiring).
Somehow I'm getting the impression you did something to the wiring at the relay. I don't know why I got that idea but I want to be sure. Did you do all you modifications at the fuel pump as I described, or somewhere else?
Steve '92ES
04-11-2011, 06:28 PM
Would the way to diagnose if it is the MFI or ECU be to wire the fuel pump to 12v and run a switch to turn it on right before I start the car?
Do you have a voltmeter or test lamp you can use to check for power at the fuel pump?
92EuroDiamante
04-11-2011, 06:35 PM
I have a voltmeter yes.
I put the aftermarket relay next to the stock relay. I did this because unlike the 3s the fuel tank cannot be accessed from inside the car.
Here is how I wired it.
The only wire I touched coming off the stock relay E8t07871 was the power wire to the fuel pump. I cut that several inches from the stock relay.
I connected that to the aftermarket relay. I connected the other wire of the aftermarket relay to the wire going to the fuel pump. The other two wires to the aftermarket relay went to the battery and ground.
just like this http://www.stealth316.com/images/fprw-schematic.gif
car started and ran fine several times. This happened right after I pegged the gas.
Steve '92ES
04-11-2011, 07:02 PM
Hmmm. The point of a hotwire is to run a larger wire straight to the fuel pump from the battery to make sure the pump gets all the power it wants. By re-using the stock wire I don't see that you accomplish anything other than to add an extra relay that doesn't really bring much to the party. On the other hand I don't see that it would hurt anything either.
On to your current problem though. I was going to suggest you check for voltage at the fuel pump while you crank but you say the Diamante's pump isn't as accessible as the 3S. On the 3S there's a test wire for the fuel pump on the passenger side firewall, under the wiper motor. Do you have something like that?
92EuroDiamante
04-11-2011, 07:37 PM
I didnt reuse the stock wire. I used 8g wire to the hotwire relay, and then 8g wire from the hotwire relay to the fuel pump. At this time the 8g wire to the fuel pump is hooked up to the stock MFI just to diagnose.
I made myself a little loop so I can tap for voltage :). I will do that.
Steve '92ES
04-11-2011, 07:45 PM
Opps, sorry. I miss-understood that.
Do you get power on the wire going to the fuel pump while cranking?
(you have to be cranking, don't just turn the key on)
92EuroDiamante
04-11-2011, 07:56 PM
Ok I just hooked up the voltmeter and cranked it. The MFI starts clicking like crazy. As it clicks I get intermittent voltage to the fuel pump. very short bursts, not enough for the fuel pump to build up pressure and volume. The car cranks and cranks and catches for a split second as the pump gets voltage. But since the voltage stops just as quick it dies.
Steve '92ES
04-11-2011, 09:00 PM
If you disconnect the wire to the fuel pump does the MFI stay on or does it still click?
Also, what is your voltage at the battery when cranking?
92EuroDiamante
04-11-2011, 09:42 PM
If you disconnect the wire to the fuel pump does the MFI stay on or does it still click?
Also, what is your voltage at the battery when cranking?
I will check this.
The battery is brand new and had no problems before this but I will get a reading soon.
mb3000
04-11-2011, 11:54 PM
You can test the MFI relay independent of the car. Pull your battery and grab some spare wire a couple feet long. When connecting and disconnecting the - wire on the battey terminal the relay should click.
[]
[1][2][3][4][5]
[6][7][8][9][10]
+ to 10, - to 8
+ to 9, - to 6
+ to 3, - to 7
Edit: Here is a diagram, along with a picture of what the inside of the relay looks like. (for those who might be curious)
http://i928.photobucket.com/albums/ad128/mb3000gt_photos/paint.jpg
http://i928.photobucket.com/albums/ad128/mb3000gt_photos/IMG_0664.jpg
92EuroDiamante
04-16-2011, 04:49 PM
im off to test it today.
I rechecked my wiring, the rewire is exactly as described by the site I linked to.
Could the rewire really have blown my stock MFI?
92EuroDiamante
04-16-2011, 05:54 PM
Ugh I wired it up like shown and of course it clicks when connected and disconnected.
Grrrr. Wish it was just broken, easy fix.
Well time to look into what else it could be!
92EuroDiamante
04-18-2011, 02:25 PM
checked everything again, adjusted my TPS which was a tad off, finally got around to taking care of it.
Car just cranks and cranks away.
Just one thing though, on my MFI relay the connector in the 1 spot is empty. No metal there. Its the same part number as the 3000gt though.
Anyway, mine clicks fine when wired up like the diagram.
If I give my fuel pump 12v and try and start the car will that work?
mb3000
04-18-2011, 05:56 PM
They don't have a 1 spot connector, at least all the ones I've seen dont.
GTOJOE
04-18-2011, 07:52 PM
checked everything again, adjusted my TPS which was a tad off, finally got around to taking care of it.
Car just cranks and cranks away.
Just one thing though, on my MFI relay the connector in the 1 spot is empty. No metal there. Its the same part number as the 3000gt though.
Anyway, mine clicks fine when wired up like the diagram.
If I give my fuel pump 12v and try and start the car will that work?
If you manually provide power direct to the pump then yes the car should start.
92EuroDiamante
04-20-2011, 12:44 AM
If you manually provide power direct to the pump then yes the car should start.
I should have asked if it was safe as well haha, I figured it would work but I dont need to blow something else out.
Well of course it clicks, that's the coil tested. Now all you have to do is test the contacts.
Steve
Ok, and how do I do that. Do i connect and disconnect each ground wire one by one.
I can tell the unit isnt functioning like it was. Before it would click a few seconds after I turned the car off and left the key in the on position. It doesnt do that any longer.
Ive got another unit on order but I want to know if this is expected to happen when you hotwire.
mb3000
04-20-2011, 12:55 AM
If it's similar to a 3/s than this might help. Starting on page 169.
http://www.3sx.com/faq/manuals/Service-Manual-3000GT-1992-1996-Volume-1.pdf
GTOJOE
04-20-2011, 05:18 AM
I should have asked if it was safe as well haha, I figured it would work but I dont need to blow something else out.
Perfectly safe.
92EuroDiamante
04-23-2011, 02:58 PM
Ok so I connected the fuel pump hotline (right after the stock relay) to 12v and started it up. It started up like a champ but then the rpms bounced from 1k to about 1.5k and it repeated that for a short amount of time. The stock relay began to click and then it died.
Bad relay then?
Im getting my new one on monday so I will know I just dont want to fry the new one.
92EuroDiamante
04-28-2011, 07:01 PM
Ugh so I got my new MFIs in the mail (just in case I got two) and when I put them in the car just cranks and cranks.
So Im guessing the MFI isnt the issue (got at least one for sale cheap now!).
Any idea what else it could be? I didnt smell any burnt capacitors for it to be the ECU.
GTOJOE
04-28-2011, 08:28 PM
Might be time to get hold of a full wiring diagram and trace out all your wires. Where does the MFI get it's power from?
92EuroDiamante
05-07-2011, 03:10 AM
Definitely ruled out the MFI. Put my original MFI in another car and it ran just as it did before the swap.
All fuses are fine, battery, alternator, ignition components and fuel pump all tested good. Looks like my ecu took a crap right after the mod. Wonder if the hotwire mod put stress on it somehow? It was wired according to instructions but who knows.
TUFFTR
05-08-2011, 07:27 AM
Nah mate if anything the hotwire mod has put LESS stress on your ECU.
I highly doubt you've stuffed the hotwire, but it'd be good if you could write out a diagram and show us what you connected to where.
Hope you get her up and running again mate, Love diamantes :D
92EuroDiamante
05-08-2011, 02:12 PM
Nah mate if anything the hotwire mod has put LESS stress on your ECU.
I highly doubt you've stuffed the hotwire, but it'd be good if you could write out a diagram and show us what you connected to where.
Hope you get her up and running again mate, Love diamantes :D
no choice but to get it running. just put in an IPT trans and imported a Vanity kit, cant let it sit now.
i believe i posted the diagram on page 2, ill check when I'm not on my phone
92EuroDiamante
05-08-2011, 06:10 PM
Nah mate if anything the hotwire mod has put LESS stress on your ECU.
I highly doubt you've stuffed the hotwire, but it'd be good if you could write out a diagram and show us what you connected to where.
Hope you get her up and running again mate, Love diamantes :D
Im about to pull the ECU and im hoping youre experience with these could help me. I removed the stereo, shifter trim, and carpet from the sides of the console, and now I can see the ECU. Mine is blocked by another computer and caged in by tons of wiring. What is the best way to get this thing out?
Unless I got two bad MFIs off ebay than im pretty sure its the ECU. Car runs when hotwired.
http://i53.tinypic.com/uo7c6.jpg
heres a pic, you can see it behind the small silver computer. Hopefully I dont have to pull the whole dash
92EuroDiamante
05-08-2011, 06:12 PM
At least that is where I think it is. I pulled all the other computers in the way and ran the parts numbers.
92EuroDiamante
05-08-2011, 06:58 PM
Ah disregard that. I found the ECU on the passengers side. Bad write up said it was in the center. Oh well, I needed to replace an RCA cable anyway :p
Bad news is I found the ECU, opened it and it was pristine. Heres a pic.
http://i53.tinypic.com/2eb9x7k.jpg
From what I understand you can see the cap blow so now I am at square one.
No idea what it could be now. Engine runs fine when hotwired so I know nothing broke there.
92EuroDiamante
05-08-2011, 08:34 PM
Ok, so I put all the brain boxes back in and it started. It started strong however it kept going from 1k to 1.5k rpm. Everytime it would bounce the MFI would click.
After doing that for a short time it died.
I tried starting it again and it started poorly and stumbled badly around idle and then died. Started again and it repeated the stumbling. Then after a few tries it would not start.
AWDBoostin
05-08-2011, 08:54 PM
Your problem when its running is the MFI relay coil going "off" and "on." If you changed the relay and its still doing it you need to check the wiring to the relay.
Have you checked battery voltage when running and when not running. My car was doing the same thing when the battery was low, but my battery was almost new. Bad alternator was actually draining the battery. I had more voltage when the car was off.
Also I don't think the MFI relay is a good place to tap into for your hotwire relay trigger. The reason is, the motors fuel and spark is cut if one isn't detected.
92EuroDiamante
05-08-2011, 11:10 PM
The battery is good and the alternator is a nearly new high output unit. Both test fine.
Yeah, seems like I screwed up on that one. Reason I put it up front is that the only other place on the Diamante would be in the trunk behind the back seat and I have a custom trunk mold so if anything happened I would have to remove it and that would be a huge pain.
I removed the hotwire mod and it still does it so either the mod broke something or its unrelated.
GTOJOE
05-08-2011, 11:18 PM
If that MFI relay is clicking then it's either faulty or the power supply to it is cutting in and out. You need to check the wiring diagram and trace all the wires back. Perhaps the device it recieves it's power from is faulty.
92EuroDiamante
05-08-2011, 11:34 PM
If that MFI relay is clicking then it's either faulty or the power supply to it is cutting in and out. You need to check the wiring diagram and trace all the wires back. Perhaps the device it recieves it's power from is faulty.
Well I don't think it is the MFI. I bought two off of ebay to replace my stock one and neither of them change anything. I guess they both could be bad, I emailed the sellers today to ask if they could verify that they came off of a working vehicle.
Do you know what powers the MFI in the 3000gt? They use the same ECU and MFI so it would be the same. If not I will follow the wire tomorrow.
GTOJOE
05-08-2011, 11:36 PM
I'll try to remember to check the wiring diagram when I get home. It's just after midday here and I'm at work :p
92EuroDiamante
05-08-2011, 11:53 PM
I'll try to remember to check the wiring diagram when I get home. It's just after midday here and I'm at work :p
Thank you :)
Yeah its strange, every time it clicks its like the car is turning on and off. My gauges which have a warm up sequence (where they go to full and then fall back on the reading when you turn the car on )
keep going to full, then off, full than off. My remote line to the fusebox keeps cutting out then.
TUFFTR
05-09-2011, 09:49 AM
Interesting, I would take a guess (as you've probably already nutted out) that your + to the relay has a loose connection.
Do you have a USDM electrical manual like this one?
I do but it's at my other house right now so I cant look anything up sorry mate, but it'd cover EVERYTHING you need
1992 1993 1994 1995 MITSUBISHI DIAMANTE SERVICE MANUAL | eBay (http://cgi.ebay.com/1992-1993-1994-1995-MITSUBISHI-DIAMANTE-SERVICE-MANUAL-/380203267033?pt=LH_DefaultDomain_0&hash=item5885e173d9)
GTOJOE
05-09-2011, 10:42 AM
Ok I think this is what your talking about??? The turbo models have 2x relays which might be causing some confusion for you. There is a relay to control the high and low voltage power going to the pump and there is a basic relay that powers the pump. I suspect you on have this one below [the basic only]. This should tell you how to test it and what pins go to where.
http://www.3sx.com/store/comersus_viewItemBundle.asp?idProduct=26912
http://i299.photobucket.com/albums/mm289/1STGENGTO/ControlRelay.jpg
http://i299.photobucket.com/albums/mm289/1STGENGTO/ControlRelaywiringtest.jpg
http://i299.photobucket.com/albums/mm289/1STGENGTO/ControlRelaytest.jpg
92EuroDiamante
05-09-2011, 02:51 PM
Thank you!
Any idea which one I should test for specifically (dont want to screw around with the frail stock wires more than I have to)
The car does get spark, just not fuel, and then when I hotwire the fuel pump it starts up but doesnt idle then dies.
92EuroDiamante
05-09-2011, 03:15 PM
Ok here is how I wired it
http://i54.tinypic.com/2eki4xe.jpg
87 went straight to battery with fuse inline
85 I grounded to the frame
30 went to the fuel pump via a new 8g wire I ran
86 I connected to the black/blue wire right of the MFI/MPI
Did I interpret that last one wrong? I figured you just put the relay in line with the wire off the MFI using heavier wire to the relay and then from the relay to the fuel pump?
DocWalt
05-09-2011, 04:13 PM
Which black/blue wire did you tap to trigger the relay? You're supposed to tap the one on top of the fuel pump assembly. I have no idea if that's fed directly by the MFI relay.
92EuroDiamante
05-09-2011, 04:28 PM
Yeah,
I cant tap it on top of the assembly because of the fuel tank placement, however I did follow the wire from the mfi to my back seat then to right above the fuel tank so Iam thinking it was the same wire. I tested voltage at the MFI and then at right above the fuel tank and it was the same. I may have really screwed up though, its possible it wasnt the same wire. Grrr.
Ill definitely put the relay right above the fuel tank when I get this figured out. Im trying to find a good ECU to swap out. Seems like all the reasonable ones are 'no warranty no guarantees' so Id like to be sure before I spend that much on a stock part.
GTOJOE
05-09-2011, 09:26 PM
Thank you!
Any idea which one I should test for specifically (dont want to screw around with the frail stock wires more than I have to)
The car does get spark, just not fuel, and then when I hotwire the fuel pump it starts up but doesnt idle then dies.
As per the diagram above you need to unplug the relay and unplug the ECU and use a multimeter to make sure the wires between pin 8 and 108 are fine, between pin 4 and pin 12 & 25, pin 10 should be a ground. Also check pin 110 on the ecu harness and make sure it's also earthed/grounded.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.