PDA

View Full Version : For Sale 19t Conversions!


markoverclock
04-06-2011, 11:14 AM
Some of you may remember me from 3si. I used to do the 19t conversions on their. Long story short im doing here now.:biggrin:

The price is $1775 with your cores. This price includes new compressor wheels, new turbines (HL) Clipping if wanted. And the upgraded thrust setup for handling higher boost pressures. I will also include any machining on the bearing housing or replacement if needed.

The reason i only will do the upgrade with the HL turbines is because you need to match the flow of the compressor wheel with the turbine, if the air goes into the engine it also needs to come out of the engine, and the little L turbine is just not good enough.

Comes with a 1yr warranty against any defects on my behalf.
markoverclock
04-11-2011, 12:07 AM
bumpppp
B-Man
04-12-2011, 11:41 AM
Can you use already converted 13T with WRX intake housings? Same price?
markoverclock
04-12-2011, 01:41 PM
yes i can use your housings.
Jenkins
04-15-2011, 02:30 PM
By any chance do you do any other conversions besides 19t?
TwIzTeD_3kGt
04-17-2011, 12:18 AM
Nice, glad to see you back at it. Great price too. Paid 1700 for IPS 19Ts with the L wheel used last year.

If I need a rebuild, could I look you up?
MR2
04-17-2011, 02:01 AM
what's the biggest you can do with 9b's? since the 13G's suddenly massively increased in price etc
markoverclock
04-19-2011, 11:11 AM
19t with HL turbines is the biggest it goes from small to bigg, 9b,13g,15g,19t
green-lantern
04-19-2011, 11:56 AM
Ah crap, you weren’t doing this when I was looking. I think I even PMed you about it. Went with IPS, I got the HL wheel though.
Sin'sVr4
04-20-2011, 10:48 AM
free bump for a great guy and product!
markoverclock
05-13-2011, 02:14 PM
bumpp to the top
markoverclock
05-23-2011, 06:59 PM
bummpppppp
GTOJOE
06-16-2011, 09:20 AM
How much [posted to Cairns Australia] for a 19T set without cores to upgrade? My 9bs are currently fine and it does not make sense to send them halfway around the world.

Cheers,

Joe
emtark
06-16-2011, 12:18 PM
+1 for Australia request. Except I'm in Adelaide :)
Sin'sVr4
06-16-2011, 09:02 PM
mark you do billet?
markoverclock
09-24-2011, 03:49 PM
bump to the top
markoverclock
09-25-2011, 06:38 PM
nope sorry cant do that "sin"
markoverclock
10-06-2011, 07:30 PM
bumppp
markoverclock
10-16-2011, 03:26 PM
bump to the top
markoverclock
10-19-2011, 07:54 PM
bump to the moon
MR2
10-20-2011, 06:31 AM
Since we're somewhat pointing people in your direction, what exactly would happen if you had a warranty situation with a pair of turbo's that shipped to AUS? lets assume that it's not in shipping since that would be covered by the shipping company (I assume?)
markoverclock
10-21-2011, 06:54 PM
Since we're somewhat pointing people in your direction, what exactly would happen if you had a warranty situation with a pair of turbo's that shipped to AUS? lets assume that it's not in shipping since that would be covered by the shipping company (I assume?)

If you had a turbo failure due to my negligence or craftsmanship. Then you would pay shipping to me and i would fix them and ship them back to you. If in fact it was my fault and not yours, meaning not oil contamination, not oil coking and etc. but i seriously doubt that would happen, Insurance on the over seas would be covered if you wanted to pay the shipping insurance.