PDA

View Full Version : I Want To See Your TD05 Setups (16g's Preferably)



Austin@STM
04-04-2011, 08:15 PM
Just want to see how people normally do there manifolds, and piping on the 16g kits. I searched around but didnt find to many pics of kits installed.

I have an idea, and i just want to see if its possible or just completely stupid.

Thanks,
-Austin@STM

Hans@GZP
04-04-2011, 11:21 PM
I have a picture of my 16g vr4 on my facebook. I'll have to dig it up if you don't find it.

Austin@STM
04-04-2011, 11:45 PM
i'll go facebook stalk you real quick

FeaRpb
04-04-2011, 11:49 PM
You can facebook stalk me ;)

stealthII
04-04-2011, 11:59 PM
I have quite a few pictures of the IPS kit on my website.

Emilie@GZP
04-05-2011, 11:57 AM
98 black VR4 pictures by 3Scar - Photobucket (http://s34.photobucket.com/albums/d111/3Scar/98%20black%20VR4/)

There are some pics from putting that car together.

AdamVR4
04-05-2011, 06:15 PM
Mine (DR/Titan TD05 headers and E16G's)

http://i26.photobucket.com/albums/c115/adamvr-4/notransstillcrowded.jpg

http://i26.photobucket.com/albums/c115/adamvr-4/11.jpg

http://i26.photobucket.com/albums/c115/adamvr-4/7.jpg

I've never liked the way I did the IC pipes, but when I made them I pretty much followed the tried and true techniques. The next IC setup will be liquid to air, so I'll likely never optimize this. However, there has to be a way to route the charge piping away from the exhaust that won't create a head ache when it comes time to pull the trans.

AdamVR4
04-05-2011, 06:22 PM
I've always loved this approach. Not really for its simplicity though :)

LSE Josh's car (Niterydr)

http://i26.photobucket.com/albums/c115/adamvr-4/P1010023.jpg

FeaRpb
04-05-2011, 06:58 PM
I also love that setup ^

Nytron
04-05-2011, 08:21 PM
^ seconded.

That is similar to Ray's old chameleon colored vr-4, no? I've always wondered why no one made a kit like that.


http://www.youtube.com/watch?v=3LD9KvRldyE

TurboSinceBirth
04-07-2011, 01:08 AM
I've always loved this approach. Not really for its simplicity though :)

LSE Josh's car (Niterydr)

http://i26.photobucket.com/albums/c115/adamvr-4/P1010023.jpg

+1 I wish my billet 5857s were fit that way. It would have made things much easier and swapping turbos isn't so bad plus getting to all the bolts in the car sucks. I need to re-do the intercooler pipes, y, and route the front intercooler pipe underneath for the turbo.

IPD
04-07-2011, 08:06 AM
what idea were you wanting to try out?

imho, headers which merge all three cylinders in a short amount of space > headers which merge them after a long run of tubing. even if you are going to mount the turbo in an "other than stock" location, you'll save space & weight by running a single, merged pipe to that location, rather than three separate tubes and merging them just prior to the exducer.

YoshiBishi
04-07-2011, 11:43 AM
98 black VR4 pictures by 3Scar - Photobucket (http://s34.photobucket.com/albums/d111/3Scar/98%20black%20VR4/)

There are some pics from putting that car together.

How much power does the feline add? :p

http://i34.photobucket.com/albums/d111/3Scar/98%20black%20VR4/P2010438.jpg

boosted3s
05-10-2011, 07:14 PM
^puss magnet!