PDA

View Full Version : Exhaust Help



locplayer1
04-04-2011, 02:13 PM
Hey I have been having some issues with the mesh on my down pipe. I have a 3sx down pipe and have had the mesh rip on it then replaced it and it sounds like it is doing it again. Would like to do just a steal pipe but don't really want to do solid motor mounts. Anyone have this problem or know how to fix it?

1gRick
04-04-2011, 04:27 PM
Check your mm. If they are ok then use a longer piece of mesh. Many of these have rediculously short pieces. Any decent muff shop can do it.

locplayer1
04-04-2011, 08:39 PM
Yeah the piece that is bad now is about 6 inches long I believe any other ideas?

CoopKill
04-04-2011, 09:09 PM
Motor mounts... Replace them and problem solved.

IPD
04-05-2011, 12:15 AM
coop is right. even stock-style new rubber mounts will do the trick.

Chris GTO TT
04-05-2011, 12:26 AM
Agreed stop the motor from moving that's what is causing too much stress on the flex section.

locplayer1
04-08-2011, 10:33 PM
Cool thanks guys I am thinking about picking up some solid motor mounts the have a set on 3sx that pretty good price any ideas on this or know where I can get some cheaper ones?

stealthee
04-08-2011, 11:21 PM
Buy them directly from Maximal Performance. You'll likely get a better price from the source.

MADMarc
04-09-2011, 12:24 AM
Yeeeap, definitely happens when the mounts are letting the motor move around too much. You've got Terry's over at Maximal Performance and I also believe Split Second Motorsports (both in sponsor's section) sells them as well.

Chris GTO TT
04-09-2011, 02:09 PM
I've got the harder poly mounts and they transmit plenty of vibrations I'd be hesitant to get solids....that's just me though

1gRick
04-11-2011, 01:46 AM
Try just the back with poly.......unless your a 800 hp build that should do the trick. You can buy just the back polys on ebay. About $80.