DocWalt
03-19-2011, 02:32 AM
I bought this bone stock as a beginner gun, modded the crap out of it, and here we are. I'm looking to sell off what I have in this pic. I have a few odds and ends that were stock bits on the marker too, if you want. The marker is setup as a low pressure gun (you can use regular CO2 or an air tank, doesn't matter, has a regulator) and fires wonderfully. I've put about 20,000 balls in two-three days of play time with ONE chopped ball.
I'd consider this a fantastic beginners marker as it sits now, basic maintenance and it should last a long time. An easy upgrade would be an e-frame when your level of play goes up. I had left it mech for the simplicity and reliability.
http://img269.imageshack.us/img269/3522/img20110318185319.jpg
Here's a basic list of what's here:
Spyder Victor
Trinity QR Hopper clamp
Kila Magnetic Ball Detent
ShockTech Delrin/Aluminum Bolt
Titanium Hammer (don't know brand)
CP Regulator w/ dye gauge (set for low pressure)
ShockTech expansion chamber
16" JJ Performance Ceramic Barrel
Maddman Rocket Valve (Not fully tuned. Could have some more trimmed off to lower pressure more)
Stock Mech frame
EVLution 3 hopper
Barrel condom
High pressure rated plastic line (not sure if it's still good)
Parts -
14" JT Barrel
Stock Barrel
JT barrel plug
Barrel condom
Gun lube
Assorted spare parts/tools for gun
Waist pack with two 140 ball pods, and two 100 ball pods. Will fit a tank
X-Radar Chronograph
Maddog Designz Spring kit
High flow stock valve
Remote tank line
Plastic butt for a 12oz CO2 bottle
Two crummy face masks. Could use a cleaning, but should be ok.
Tank O-Rings
I have more pics, and I can take detailed pics of anything you have a question about.
I'm looking for $150 for everything. Just screw in a bottle of air/co2, dial in your FPS and play. We can discuss splitting parts of it up if you want.
edit: dropped price
I'd consider this a fantastic beginners marker as it sits now, basic maintenance and it should last a long time. An easy upgrade would be an e-frame when your level of play goes up. I had left it mech for the simplicity and reliability.
http://img269.imageshack.us/img269/3522/img20110318185319.jpg
Here's a basic list of what's here:
Spyder Victor
Trinity QR Hopper clamp
Kila Magnetic Ball Detent
ShockTech Delrin/Aluminum Bolt
Titanium Hammer (don't know brand)
CP Regulator w/ dye gauge (set for low pressure)
ShockTech expansion chamber
16" JJ Performance Ceramic Barrel
Maddman Rocket Valve (Not fully tuned. Could have some more trimmed off to lower pressure more)
Stock Mech frame
EVLution 3 hopper
Barrel condom
High pressure rated plastic line (not sure if it's still good)
Parts -
14" JT Barrel
Stock Barrel
JT barrel plug
Barrel condom
Gun lube
Assorted spare parts/tools for gun
Waist pack with two 140 ball pods, and two 100 ball pods. Will fit a tank
X-Radar Chronograph
Maddog Designz Spring kit
High flow stock valve
Remote tank line
Plastic butt for a 12oz CO2 bottle
Two crummy face masks. Could use a cleaning, but should be ok.
Tank O-Rings
I have more pics, and I can take detailed pics of anything you have a question about.
I'm looking for $150 for everything. Just screw in a bottle of air/co2, dial in your FPS and play. We can discuss splitting parts of it up if you want.
edit: dropped price