View Full Version : My Quest to Prove Ray Pampena a mortal man.
dpartinvr4
03-03-2011, 02:55 PM
so from the days of my 3s infancy "3 years ago" The names Ray Pampena and Matt Monet have been that of legend. well recently, my idea of a 10 second 3s with 13T's was laughed at. when I brought up Rays 11.2 second run on a basically stock GT with DR650's, I was told that it went that fast because Ray tuned and drove it. well, Ray bleeds just like I do "I hope" so I see no reason that I can't run 10's with my set up: Rob Beck 13T's, Borla 3" exhaust "no cats", aftermarket downpipe, AEM FPR, GM MAF, MAFT, SAFC, PMP FMIC, MSD DIS-4 and various vaccum, A/C, and bottom of the throttle body reduction. I'm not saying I'm better than anybody, I'm just saying they're not Gods with some unascertainable ability.......I'll let you guys know how I do when I get my car done and to the track in about 3-4 weeks. :)
UTRacerX9
03-03-2011, 04:13 PM
LOL, well, I posted in your other thread. I didn't laugh at you, but for those of us who have been with this platform for (in my case) well over a decade, we have a pretty good idea of what it will take. I do think 10's are POSSIBLE with 13T's, but as I stated before, that is going to entail a LOT of other mods to make it happen. Some serious weight reduction, and a track that is prepped very well, and cooperative weather.
I have 13T's myself. However, I bought them with the goal of 11.6-11.7 at 120-125 traps. That is certainly doable with 13T's. But shaving off that .6 is harder than you might think, which is why I recommended 19T's. The 13T is a bit smaller than a 15G, which is what Ray had when he went 11.002 or something. So right there, you've got a guy with a bigger turbo, who knows these cars inside and out, not getting into the 10's.
I hope you can do it, keep us posted!
They might be "mortal" but there is a reason they are legends. :D They have driven better times with similar or the same setups that other people cannot match.
Matt Monett is THE 8 second club member. THE member. No one else in a 3S has ever done it, and it's not because of the money he has into his car - which I'd bet is comparable (or less) than a number of people.
If I remember right, Ray drove a members car yearrrs ago (6? 7?) and managed to clock off almost a half second faster 1/4 pass than the owner did, at the same track on the same day. It *might* have been Nelson's car, I know Ray drove it, but I'm not sure if that's the one I'm thinking of.
There's a few others from a long time ago like Jack Tertadian, aka Dr Jack, who ran a 10.8 on 15Gs (which are roughly equivalent to 13Ts) somewhere back around '00, though I think he had a small shot (35? 50?) of spray too. They are closer to a 13T than the normal 15G conversions, they were "super" 15Gs, which have a larger housing than stock, not the bored stock housing with a 15G wheel, so moderately comparable to the 13T w/WRX housings.
Other than that, almost all of the sub-11 second runs I've seen are "non legends" running TD05s, T3/T4/DRxxx setups - and some of them STILL slower than Ray/Matt. ;)
However ... I do wish you the best of luck with it. If you have some serious weight reduction and driving skills, it's possible; Austin @ STM made 10.9 on stock 9Bs and he's a "mortal" too (though I'm starting to wonder) - but Austin had a lot of help from the "I don't need this!" weight loss fairy.
Lithium
03-03-2011, 04:19 PM
10 Seconds is capable with a 9B car, thats already been proven. It just bepends on how much of a car you want left once its done. I'm all for friendly competition and I hope you can raise the bar and stir up the pot. My 2 cents, spend money on a nice multi disc clutch setup and suspension. Good luck.
x2percentmilk
03-03-2011, 05:58 PM
Agreed, go for your goals but dont forget what needs to be done to get there.
Good luck! :)
KeithMac
03-03-2011, 06:20 PM
When 10 sec on 9b`s is the benchmark 13T`s are cheating!.
I thought i had the magic bullet with TD04-16g`s to run low 11`s but then the clutch gods decided to play their cards..
Austin@STM
03-03-2011, 06:24 PM
10 Seconds is capable with a 9B car, thats already been proven. It just bepends on how much of a car you want left once its done. I'm all for friendly competition and I hope you can raise the bar and stir up the pot. My 2 cents, spend money on a nice multi disc clutch setup and suspension. Good luck.
Agreed, there wasnt much to my setup, but it was setup.
The only way to get a small turbo car into the tens is simply the launch. If your car cant launch then your screwed for sure. On snow tires cutting high 1.6-1.8 60's i bested 11.3. However with the slicks every full pass was in the 10's, thanks to some 1.4 60's.
That being said i dont think tens are out of the question by any means, but your gonna have to push it. I had the boost controller cranked all the down, and worked the turbos for everything they had, with a bigger turbo (13t's in this case) that should flow more air, technically you should have more power if everything else is there like fuel, cool air, and good spark it can be done.
I hope it works for you, but take a look at my build threads so you know what your getting into. Its not something thats going to just happen because you have the parts on the car.
-Austin
dpartinvr4
03-03-2011, 06:43 PM
when the car was bone stock, less an FIPK and catback, I trapped 1.7sec 60' times, and ran 13.3 on stock boost, and I don't launch hard "around 3k rpm's" so 17 lbs with 13T's and all the things I have listed below will let me dial the tune in, so I just feel like 10's are very do able.
CoreyB
03-03-2011, 06:45 PM
IMO getting a car with 13t's into tthe 10's would only prove that you were willing spend some money and time to hit your goal. It certainly wouldnt reflect only Matt or Rays history. Beat Matts pass and then you have proven something.
dpartinvr4
03-03-2011, 06:48 PM
IMO getting a car with 13t's into tthe 10's would only prove that you were willing spend some money and time to hit your goal. It certainly wouldnt reflect only Matt or Rays history. Beat Matts pass and then you have proven something.
I'm not trying to put them down, just the subject of that other thread kinda turned into, "well your not Ray so you can't go that fast".... it was just an interesting title to get some discussion going :)
Chris@Rvengeperformance
03-03-2011, 07:17 PM
you are planning on running 10s with 13Ts and 17 lbs of boost?
Have you even watched videos of cars down down the track in less than 11 seconds?
KeithMac
03-03-2011, 07:26 PM
when the car was bone stock, less an FIPK and catback, I trapped 1.7sec 60' times, and ran 13.3 on stock boost, and I don't launch hard "around 3k rpm's" so 17 lbs with 13T's and all the things I have listed below will let me dial the tune in, so I just feel like 10's are very do able.
From my own experience I would say 1.7 60 foots on a 3000 rpm launch were impossible but fair play if you`ve managed it!.
Best bet is to bag the 10 second run and THEN post, rather than this thead just dissapearing..
dpartinvr4
03-03-2011, 07:56 PM
I'm going to run as much boost as I can, but 17 seems to be the consensus for "maxxing" the 13t's, but if they'll push more, i'll run the race gas and make it work.
Austin@STM
03-03-2011, 07:59 PM
9bs can do 21psi...
dpartinvr4
03-03-2011, 08:01 PM
From my own experience I would say 1.7 60 foots on a 3000 rpm launch were impossible but fair play if you`ve managed it!.
Best bet is to bag the 10 second run and THEN post, rather than this thead just dissapearing..
it's more in how you stage that lets you get the quicker time, basically you just stop as soon as the second stage lights are on, and it lets you get a good run before you even cross the line. and my RT/s are consistently .6 which doesn't help with the 60 foot times, but I'm proud of them being 1/10th off of perfect.
Hym3n
03-03-2011, 08:33 PM
I think the big question here is... what past experience do you have in tuning or drag racing cars?
dpartinvr4
03-03-2011, 08:41 PM
"ESPN...the coverage is amazing"....lol but I've been racing for a couple years, and tuning i'm newer too,but i understand the concept and what goes into it, i.e. 80% IDC's 11.0-11.5 AFR, i know what things need to be, and how to get them there i.e. adjust fuel pressure, and safc to get what i'm looking for. theres more to it than that obviously, but you get the idea.
Hym3n
03-03-2011, 08:44 PM
Ok. With that said then, your modifications list is concise... but what about OTHER supporting modifications, i.e. non power adders? What transmission/clutch/driveshaft? What suspension? Making a 10-second pass often requires much more than standard injectors, pump, turbos.
Chris@Rvengeperformance
03-03-2011, 08:46 PM
it's more in how you stage that lets you get the quicker time, basically you just stop as soon as the second stage lights are on, and it lets you get a good run before you even cross the line. and my RT/s are consistently .6 which doesn't help with the 60 foot times, but I'm proud of them being 1/10th off of perfect.
uh you realize the timing of the run doesn't begin until you break the starting beam. I.e. your r/t time has NOTHING to do with your e.t.
dpartinvr4
03-03-2011, 08:47 PM
stock suspension for now, I'm looking at drop coils, I'm going to make a T-case brace, and it's got a stage two clutch.
dpartinvr4
03-03-2011, 08:47 PM
uh you realize the timing of the run doesn't begin until you break the starting beam. I.e. your r/t time has NOTHING to do with your e.t.
I believe I said that in the quote :)
mb3000
03-03-2011, 08:48 PM
Come on guys, this isn't pinks :p
dpartinvr4
03-03-2011, 08:51 PM
Come on guys, this isn't pinks :p
NO....THIS is 3SGTO.....way more serious........lol
TurboSinceBirth
03-03-2011, 09:20 PM
"ESPN...the coverage is amazing"....lol but I've been racing for a couple years, and tuning i'm newer too,but i understand the concept and what goes into it, i.e. 80% IDC's 11.0-11.5 AFR, i know what things need to be, and how to get them there i.e. adjust fuel pressure, and safc to get what i'm looking for. theres more to it than that obviously, but you get the idea.
At first I thought you were saying 80% IDC = 11-11.5 AFR. :lol7: Not all injectors are the same and I see what you meant. I just read it wrong the first time.
3Srunner
03-03-2011, 09:25 PM
2011 schedule is up for No Limit Raceway (US41). Let's set a date now. We should try a Wed. night TNT instead of the weekend. We shouldn't have to wait nearly as long to get runs in that way. Hows about June 1st? That's an easy date to remember and I should have my car back up and going in some form by then. I'm sure if you remember to close your sunroof this time you'll hit 10.9's all day long!
Shawn...
dpartinvr4
03-04-2011, 12:01 AM
I'm thinking the sunroof will hyperreact with the new 99 wing and create a thrust vortex, propelling me to mach one, and I plan on going to the strip alot, so whenever you want to go, wednesdays are better, because I have autocross meets on the weekends. Also, I need to go to napperville to use that dynopack dyno I know aaron was wanting to go, you should come with.
J. Fast
03-04-2011, 01:27 AM
Under 20 psi, you'll never get there on 13T's, unless your car weighs 3000lbs with you in it. I consistantly can put down 124-127 traps and 11.2-11.5 on street tires in a 3750lb car at 23 psi on pumpgas w/standalone on Hybrid 19T w/no adder at 6000ft. No where near 10's but completely demonstrative of 10's being that my car would run nearly .5 faster at sea level equivalent air density. You need way more boost or much much less weight. Convert your 13t to billet 19T... throw in some E-85 and spend some time with a strain gauge and NLTS... 10's all day, Touche :)
EDIT: No standalone or launch control... not gonna happen consistantly.
colt45 gto
03-04-2011, 08:12 AM
one thing to consider....
Ray is the same size and weight as a 3s piston, he has cat like reactions and the ability to let the car break if it wants too. when it doesn't break he waves his magic over the engine and places his voodoo winners doll in the passenger seat.
now aside from the bullshit i just posted....if you fix the launch and the 60 times to a near perfection the rest just flows. it takes practice and about 500 t/cases.
good luck :)
mb7050
03-04-2011, 08:25 AM
Ray is a Wizard i think, black magic and stuff
Keyan
03-04-2011, 09:23 AM
what does ray have to do with making a 13t car run 10 seconds? :lol: :lol:
J. Fast
03-04-2011, 09:30 AM
what does ray have to do with making a 13t car run 10 seconds? :lol: :lol:
I think it was implied that Ray Pampena is the Chuck Norris of 3/S. He can put a car into the 10's with a 13T turbo by eating an Alice and Wondeland pill, jumping into a turbo, and spinning it with his feet.
Seriously though, nothing. :lol:
aaronatstate
03-04-2011, 09:30 AM
when the car was bone stock, less an FIPK and catback, I trapped 1.7sec 60' times, and ran 13.3 on stock boost, and I don't launch hard "around 3k rpm's" so 17 lbs with 13T's and all the things I have listed below will let me dial the tune in, so I just feel like 10's are very do able.
What was the trap on that?
Basically Dpartinvr4 doesn't like the fact that Ray and Matt are pretty much considered 3S gods. In all fairness most of us 3sers basically act like a "normal" person (or pretty much anyone besides Matt/Ray) simply cannot do what they can.
dpartinvr4
03-04-2011, 10:22 AM
What was the trap on that?
101mph
dpartinvr4
03-04-2011, 10:23 AM
Basically Dpartinvr4 doesn't like the fact that Ray and Matt are pretty much considered 3S gods. In all fairness most of us 3sers basically act like a "normal" person (or pretty much anyone besides Matt/Ray) simply cannot do what they can.
I don't dislike them, I think what they can do with a car is awesome, I just don't think that that "they are the only ones who can go fast in them" which was the vibe i was getting from another thread.
BaadVR4
03-04-2011, 10:31 AM
A car's 1/4 mile trap speed is an excellent indicator of "power under the curve" and therefore, how quick an E.T. it is capable of. Long, long ago, Chrysler published a table of E.T. versus trap MPH. The minimum E.T. for a trap speed of 125 MPH is 10.7 seconds. What this means is, if your car traps 125 MPH, it is making enough power to run an E.T. of 10.7 seconds. If it runs significantly slower, the reason is the suspension can't "get the power to the ground".
Our cars are notoriously slow in 60' times, a dead certain indicator of lack of good launch/traction. These cars are extremely difficult to get the E.T. in the "minimum" range. So anything you do to better launch/improve traction is going to pay huge dividends. And the launch methods that work for a stock 9B car are not going to work effectively for a more powerful/bigger turbo set up.
Just my 1.5 cents worth.
Chatzvr4
03-04-2011, 12:16 PM
I don't dislike them, I think what they can do with a car is awesome, I just don't think that that "they are the only ones who can go fast in them" which was the vibe i was getting from another thread.
They have a great combination of being able to build and race. and they are damn good at both. To call them gods, I dont think so. Are they some of the baddest motha F%&*$#@s in the platform Yes! But they have been at this for a while now. They didnt just jump in a 3/s and break records first time out.
Our shop car will be pushing upwards of 900AWHP but for me to be able to get close to one of Matt's passes I will have to weld my front end to his bumper
If you want to do what they have done then its going to take a lot of time and commitment in tuning, engine building and track time. But this is almost a waist of time because if you were to atleast match one of their records, They will turn right back around and set a new one.
I would suggest not to compare yourself to anyone. Build your beast they way you want it. If you truly want to get into the 10's you will get there. If you post up a "challenge like thread" people will jump all over you not because they are gods but because they are very respected in this platform for their commitment in pushing the platform to new levels and inspiring people like your self to push the platform.
With that said I would like to add that the car to keep an eye out for in my opinion is STM's I have a feeling that they will be making some headlines
Ray Pampena
03-04-2011, 12:22 PM
you earth inhabitants make me chuckle HE HE HE dont make me strike you down!
on a serious note, youll need 500whp to run 10s if its full weight and much less power if its much lighter. my stock DR650 car made 471 whp and would not have gone 10s as it sat... stock weight stock wheels and tires etc. drag radials would have gotten me closer but not into the 10s. it now makes 530 with the newer 650s and WILL go 10s set up the same way with the stock tires and weight.
so if you make that power, or take out the weight...or both.. you can do it!
the 11.29 was with a 1.64 60ft
http://www.youtube.com/watch?v=BuaP8WLCmas
BaadVR4
03-04-2011, 12:39 PM
I've been drag racing for over 40 years. I've had 13 second street cars, 10 second bracket cars and a low 8 second Super Comp car. All of the "drag only" cars ran consistently at the "minimum for the MPH" because they were fully modified for drag strip traction. The SC car had 1.1-1.2 60 foot times, the 10 second cars about 1.4s. The street cars were before most drag strips had 60 foot clocks, but I'd guess they were in the 1.8 range. And the street cars were also pretty consistently about .6-.7 seconds slower than "minimum".
Ray is absolutely right, the whole point is: either make the HP or lose the weight.
Austin@STM
03-04-2011, 12:42 PM
you earth inhabitants make me chuckle HE HE HE dont make me strike you down!
Please have mercy:Bow:
Ray Pampena
03-04-2011, 01:03 PM
Please have mercy:Bow:
this time only! :)
dpartinvr4
03-04-2011, 01:21 PM
They have a great combination of being able to build and race. and they are damn good at both. To call them gods, I dont think so. Are they some of the baddest motha F%&*$#@s in the platform Yes! But they have been at this for a while now. They didnt just jump in a 3/s and break records first time out.
Our shop car will be pushing upwards of 900AWHP but for me to be able to get close to one of Matt's passes I will have to weld my front end to his bumper
If you want to do what they have done then its going to take a lot of time and commitment in tuning, engine building and track time. But this is almost a waist of time because if you were to atleast match one of their records, They will turn right back around and set a new one.
I would suggest not to compare yourself to anyone. Build your beast they way you want it. If you truly want to get into the 10's you will get there. If you post up a "challenge like thread" people will jump all over you not because they are gods but because they are very respected in this platform for their commitment in pushing the platform to new levels and inspiring people like your self to push the platform.
With that said I would like to add that the car to keep an eye out for in my opinion is STM's I have a feeling that they will be making some headlines
I just want to reiterate, I am not trying to "disrespect them at all".....and Ray, "Smite me almighty Smitor!!!" lol
Ray Pampena
03-04-2011, 02:38 PM
I just want to reiterate, I am not trying to "disrespect them at all".....and Ray, "Smite me almighty Smitor!!!" lol
its all good fun :) weigh it and dyno it and youll know what to expect. drivers can also make a difference. or, just get to the track and let it rip! i cant wait to hit the track with this red car again. id like to get the other one down the track too
green-lantern
03-04-2011, 06:03 PM
Best bet is to bag the 10 second run and THEN post, rather than this thead just dissapearing..
I was just thinking the same thing.
UTRacerX9
03-04-2011, 08:03 PM
Our cars are notoriously slow in 60' times, a dead certain indicator of lack of good launch/traction.
Uh... anyone who knows how to launch without bogging these cars is rewarded with a pretty damn good 60', compared to most 2WD cars on comparable tires. As far as traction goes, we've got it in spades.
DocWalt
03-05-2011, 01:53 AM
Uh... anyone who knows how to launch without bogging these cars is rewarded with a pretty damn good 60', compared to most 2WD cars on comparable tires. As far as traction goes, we've got it in spades.
Launching without bogging is difficult because they're so heavy, but nail the launch and it's sooo worth it, haha.
see, now this is exactly the shit I'd expect to ensu from someone who lives in NEWCASTLE...(origional thread, origional poster)
from the third thread:
it's hard to explain...
Everyone over the age of 20 with any intention of getting anywhere or anything done moves OUT of newcastle.
so I know it's mean...but expecting a guy from newcastle to put down his beer and weed for long enough to do ANYTHING with his car is .....well...it just does not make sense.
KeithMac
03-05-2011, 03:08 PM
I don`t think consistant 1.7 to 1.8 60 ft times on a heavy car with road tyres is bad at all, they launch very well (5500 rmp for me).
onebadmollafolla
03-05-2011, 06:40 PM
http://i.imgur.com/MlKBI.png
I love how this 13T joke is everywhere on this forum
NOMIEZVR4
03-06-2011, 02:25 AM
I think it will be a big accomplishment if you can match Ray's 11.2 run. :)
Good Luck..
green-lantern
03-06-2011, 02:32 AM
I think these threads are gaying up the forum. Do something then post about it.
Lithium
03-06-2011, 02:55 AM
^^^ ditto, I think he should try hitting 10s with a single 13T.
Hym3n
03-26-2011, 04:04 PM
ON MARCH 3RD .... well recently, my idea of a 10 second 3s with 13T's was laughed at .... I'll let you guys know how I do when I get my car done and to the track in about 3-4 weeks. :)
Its March 26th, you've got five days to hit your goal of a 10-second 3S running 13T's. Hope you've got everything installed and dialed in by now! You're going to need some serious practice time at the track!
dpartinvr4
03-26-2011, 08:03 PM
being in college isn't helping, YEah......about that, broke a banjobolt....and not the easy one to find....I'm working on it.....I'm not gunna flake, just gotta move this back a month or so
CoopKill
03-26-2011, 08:23 PM
being in college isn't helping, YEah......about that, broke a banjobolt....and not the easy one to find....I'm working on it.....I'm not gunna flake, just gotta move this back a month or so
That's easy. Right next to your broken Ringlands!
dpartinvr4
03-26-2011, 10:34 PM
The Stupid m10x1.25 banjo bolt I looked in every shop. scheid diesel embedded up using a dye to make it for me
CoopKill
03-26-2011, 10:50 PM
http://www.merlinmotorsport.co.uk/product_info.php?products_id=2371?utm_source=Googl e&utm_medium=ShoppingUS¤cy=USD
CoopKill
03-26-2011, 10:53 PM
OR
Mitsubishi Dealer...
MF650102
10mm x 1.25mm : Fits 1990-1994 DSM Turbo oil feed line to head
dpartinvr4
03-26-2011, 11:06 PM
OR
Mitsubishi Dealer...
MF650102
10mm x 1.25mm : Fits 1990-1994 DSM Turbo oil feed line to head
A stealer-ship...........how dare you insult my intelligence..lol
Hym3n
03-27-2011, 12:56 AM
A stealer-ship...........how dare you insult my intelligence..lol
That's the only banjo bolt that'll ever be used in my car (sans Earl's fittings on -AN lines). I've tried non-OEM bolts and have found either their openings to be insufficient, or their seals to be... less than ideal. Wise man once said that if you want a fast car, there's two ways to do it. 1) Use the right combination of parts and the right driving, or 2) Throw so much money at the car that it has no choice to be fast.
Get the damn OEM bolt.
stealthee
03-27-2011, 01:03 AM
The other one is
1. Fast
2. Cheap
3. Reliable
You can only have 2 of the 3.
green-lantern
03-27-2011, 01:59 AM
Jut wondering if OP has made Ray a mortal yet?
CoopKill
03-27-2011, 02:29 AM
Jut wondering if OP has made Ray a mortal yet?
OP has no clue that Ray is a synonym for Chuck Norris!
n2nsanity
03-27-2011, 02:38 AM
OP has no clue that Ray is a synonym for Chuck Norris!
lmao, if that's so, the best he can hope for is 2nd place :p
Boomer3000
03-27-2011, 01:38 PM
Potato..
Ray is the same size and weight as a 3s piston, he has cat like reactions and the ability to let the car break if it wants too. when it doesn't break he waves his magic over the engine and places his voodoo winners doll in the passenger seat.
Oh. My new signature. Fantastic. :D
vr3.9
04-04-2011, 10:56 AM
youll need 500whp to run 10s if its full weight and much less power if its much lighter. my stock DR650 car made 471 whp and would not have gone 10s as it sat...
Ok I guess I can feel pretty good and pretty bad.
The good news: My 13T's and seat of the pants no log tuning matched Rays DR650's, wooo hoo.
The bad news: I'm still trying to get into the 11's.
What the op fails to understand is Ray and Matt have a ton of experience driving in I don't care if I break it (and often breaking it) capacity. According to Rays' math my car after my next tune would run 10's. (pretty sure upping the fuel pressure so I don't run out will get me 500hp) The car weighs 3700 so a little less than stock. But if ever get 11.5 and get kicked off the track my life is complete.
The other thing Ray and Matt have to their advantage is knowledge. Here's some things that stuck out at me as a no way.
Stage 2 clutch - That tells me you've never felt over 350hp cause that clutch will be worthless too you.
Make my TC bracket - don't even know where to start on that one.
Glass roof - big strike against you in weight reduction.
Don't get me wrong, go for it with all you got. It will give you the chance to learn a lot. It's really not about being super human but simple physics learn them.
Although I don't want to encourage you too much. After all I'm 1 hp off the the 13T record and plan on owning it with a good gap pretty soon. Don't want you raising the bar too high. :coo3l:
Hym3n
04-19-2011, 01:12 AM
Just here to harass dpartinvr4 some more. How's that 10-second car coming along?
dpartinvr4
04-19-2011, 01:29 AM
Just here to harass dpartinvr4 some more. How's that 10-second car coming along?
It's comming along, making the battery box for the dyna batt and mount for the dis-4, idk how much silk get done over the holiday weekend, but it'll be ready to take a tune soon enough
Hym3n
07-01-2011, 02:07 PM
well recently, my idea of a 10 second 3s with 13T's was laughed at.
As it should be.
I see no reason that I can't run 10's with my set up: ...
Because the 13T is not a large enough to turbo to accommodate a 10-second ~3900lb. car/driver in the 1/4-mile.
I'll let you guys know how I do when I get my car done and to the track in about 3-4 weeks. :)
...and here we are, nearly four months later. Where's the 10-second pass?
AdamVR4
07-01-2011, 03:34 PM
In for the 13 second results the first trip to the track ;) :D haha...
dpartinvr4
07-01-2011, 03:45 PM
it's running, i had it at NG, wiring up my wideband to the ECU so I can log it, i have a rough tune right now, the boost controller Sin sold me was DOA, so it's only boosting 7 pounds right now, but it will happen soon,
AdamVR4
07-01-2011, 04:00 PM
it's running, i had it at NG, wiring up my wideband to the ECU so I can log it, i have a rough tune right now, the boost controller Sin sold me was DOA, so it's only boosting 7 pounds right now, but it will happen soon,
My only advice to you is to set incremental goals. I've seen way too many with lofty goals totally crash and burn to take this sort of thread seriously. In fact, I don't recall ever seeing one of these sort of hype threads turn out well.
mb3000
07-01-2011, 05:49 PM
My only advice to you is to set incremental goals. I've seen way too many with lofty goals totally crash and burn to take this sort of thread seriously. In fact, I don't recall ever seeing one of these sort of hype threads turn out well.
vr3.9
UTRacerX9
07-01-2011, 06:05 PM
I didn't believe 13T's were capable of 10's in a full weight car... but I disagree now. After seeing VR3.9's numbers, high 10's should be attainable on E85.
AdamVR4
07-01-2011, 06:52 PM
vr3.9
Not really sure what your point is. Did he make a hype thread? Either way, he's been working on that car for quite a while. It certainly wasn't as if he threw 13T's on it and it was suddenly fast. It almost never works like that with these cars. All I'm saying is temper your initial expectations...
Chris@Rvengeperformance
07-01-2011, 07:03 PM
what drivetrain upgrades do you have?
dpartinvr4
07-02-2011, 12:20 AM
here is my first log, http://3000gt.com.au/Friends/dpartin/sensorscorrected.csv the EGRT is my wideband, I'm looking for the formula to make it a useable function. but take a look at my IDC's I've never seen them climb like that before "at least take that long to climb" and @forest, it's stock less a Tcase brace and Diaqueen fluids.
Torch
07-02-2011, 04:52 AM
uh you realize the timing of the run doesn't begin until you break the starting beam. I.e. your r/t time has NOTHING to do with your e.t.
I realize im joining the club a little late, but im glad someone caught that.
throw in some E-85
One of the best pieces of advice ive read so far.
it's running, i had it at NG, wiring up my wideband to the ECU so I can log it, i have a rough tune right now, the boost controller Sin sold me was DOA, so it's only boosting 7 pounds right now, but it will happen soon,
Which car was yours??
NOMIEZVR4
07-02-2011, 10:55 AM
in for updates/results..:D
HellBringer
07-02-2011, 11:17 AM
A+ thread! Will read again!
Chris@Rvengeperformance
07-02-2011, 12:51 PM
here is my first log, http://3000gt.com.au/Friends/dpartin/sensorscorrected.csv the EGRT is my wideband, I'm looking for the formula to make it a useable function. but take a look at my IDC's I've never seen them climb like that before "at least take that long to climb" and @forest, it's stock less a Tcase brace and Diaqueen fluids.
Without a bellhousing brace you are going to blow your trans apart.
Sent from my DROIDX using Tapatalk
dpartinvr4
07-02-2011, 01:05 PM
@ torch red with blue halos, had a black painted lip on the bumper that you could tell was hit several times abd patched back together
i3igpete
07-02-2011, 11:36 PM
@ torch red with blue halos, had a black painted lip on the bumper that you could tell was hit several times abd patched back together
the picture you posted in the other thread...
http://i888.photobucket.com/albums/ac81/dpartinvr4/2011-06-24075913.jpg
green-lantern
07-02-2011, 11:40 PM
http://www.bawcforums.org/vbb/images/smilies/imafailureplz.gif
dpartinvr4
07-03-2011, 12:53 AM
Mhmm...my
minipete lol
AudibleSilence
07-03-2011, 02:06 AM
Hmm on Ray, I never want to be in a car with that man again and that is after he took me for a spin in a 15g car....that should tell you something.
I just envy Ray's balls to drop it at 5K like in his other video that's floating around....I can never do that :p
AudibleSilence
07-03-2011, 02:25 AM
I just envy Ray's balls to drop it at 5K like in his other video that's floating around....I can never do that :p
Why not? Get a brace and tuck your skirt in honey.
hahahahaha, I just don't really want to attract so much attention :|
VR-4 0wnz j00
07-03-2011, 09:21 AM
So this quest pretty much failed?
alexw3000gt
07-03-2011, 11:59 AM
Why not? Get a brace and tuck your skirt in honey.
:lol7:
Chris@Rvengeperformance
07-03-2011, 11:52 PM
you guys remember that big bang at the drags? That was a 6 speed blowing up on the launch. They were picking up parts for a while...
haha, you guy's dont need to worry about my drivetrain, it's pretty solid.
AudibleSilence
07-04-2011, 12:03 AM
you guys remember that big bang at the drags? That was a 6 speed blowing up on the launch. They were picking up parts for a while...
Shoulda had a brace.
dpartinvr4
07-04-2011, 12:03 AM
my msd has a two step, but after seeing everyone who used theres break something, I might hold off on using that. :)..."unrealated" but forest used his, and his shifter broke....lol
Broomfield Racing
07-04-2011, 12:10 AM
The 2 step doesnt break parts, hard launching without a 2step will do the same.
dpartinvr4
07-04-2011, 12:17 AM
i'll probably set mine for 3k, back when it was stock, i'd hold it at 3000rpms, slip the clutch when the second light shut off, and be WOT pretty quick. this warranted .6 R/T's, 1.7 60ft, and a 13.4 E/T. that didn't really feel like a hard launch.
AudibleSilence
07-04-2011, 12:27 AM
The 2 step doesnt break parts, hard launching without a 2step will do the same.
Ehh every import that I've seen two step doesn't last very long doing it..just saying. Then again, it's prolly the shock produced as an indirect result of the launch that does it.
as I see it, it still largely depends on HOW you let the clutch out...and slightly on your clutch adjustment (how soon after the 2 step sees the clutch being let out that it lets the revs rise.)
vr3.9
07-04-2011, 12:46 AM
I've never really even considered 10's with my 13T's. Mid 11's would make me happy. Well to be specific getting kicked off the track. 11.5 with no roll cage. Can 3rd in a 5spd do 125mph+ with out changing the rev limiter.
UTRacerX9
07-04-2011, 01:04 AM
I've never really even considered 10's with my 13T's. Mid 11's would make me happy. Well to be specific getting kicked off the track. 11.5 with no roll cage. Can 3rd in a 5spd do 125mph+ with out changing the rev limiter.
I think mid-high 11's on pump gas is possible with 13T's, that has always been my goal. After Jet did 11.8 on race gas with basically no mods, I think 11.6-11.7 is possible on pump with more supporting mods, and on E85... Well, I'll leave it to you to find out if 10's are possible. :)
TurboSinceBirth
07-04-2011, 01:10 AM
Why people decide to go to the track with no bell housing brace(BPU and beyond) or a billet endcase(>600AWHP) if they're making that much power really baffles me. I guess they got money to piss away buying new transmissions. Lol. That's why I went with a 300M OS, SS front and mid case, and in the near future 300M rear axles. I shouldn't have a problem with my drivetrain. :)
AudibleSilence
07-04-2011, 01:24 AM
Back in the day, we used to have a 300m and that was enough. New guys are spoiled.
Checkered vr4
07-04-2011, 01:27 AM
They might be "mortal" but there is a reason they are legends. :D They have driven better times with similar or the same setups that other people cannot match.
Matt Monett is THE 8 second club member. THE member. No one else in a 3S has ever done it, and it's not because of the money he has into his car - which I'd bet is comparable (or less) than a number of people.
There's a few others from a long time ago like Jack Tertadian, aka Dr Jack, who ran a 10.8 on 15Gs (which are roughly equivalent to 13Ts) somewhere back around '00, though I think he had a small shot (35? 50?) of spray too. They are closer to a 13T than the normal 15G conversions, they were "super" 15Gs, which have a larger housing than stock, not the bored stock housing with a 15G wheel, so moderately comparable to the 13T w/WRX housings.
Other than that, almost all of the sub-11 second runs I've seen are "non legends" running TD05s, T3/T4/DRxxx setups - and some of them STILL slower than Ray/Matt. ;)
However ... I do wish you the best of luck with it. If you have some serious weight reduction and driving skills, it's possible; Austin @ STM made 10.9 on stock 9Bs and he's a "mortal" too (though I'm starting to wonder) - but Austin had a lot of help from the "I don't need this!" weight loss fairy.
I am sure this is possible as I ran 11.3@120 with a 60ft of 1.6 with a full interior, no weight reduction, DR500 93 vr4. I had a RPS Max clutch and BF Goodrich drag radials.
Back in the day, we used to have a 300m and that was enough. New guys are spoiled.
True!
Chris@Rvengeperformance
07-04-2011, 04:10 PM
the 2 step in my particular case is EASIER on the drivetrain. I can focus 100% of my mind on slipping the clutch smoothly. If you want the video I posted in the NG media thread you can see it leaves the line like an auto. Before when I had to worry about launch rpm I had a tendency to let the clutch out too quickly and shock the drivetrain.
Now, that is a driver problem, I realize, but the 2 step has allowed me to come out really smoothly and reduce the chances of breaking because I can get the clutch just right.
I would love to see a 1.7 60FT on a 3000 RPM launch. I launched at 4500 and cut a 1.75. Even with -10 degrees of timing at 4500 I'm only making 5 PSI. I'd be suprised if you are making more than 1-2 PSI with 13Ts and 3000 RPM 2 step.
I'm not going to temp fate though, I'm getting the fbc billet transfer case housings built before I hit the track again.
AudibleSilence
07-04-2011, 04:14 PM
Shock is shock..the trans always gets shocked (unless it's an auto). I suppose to your point it's how much of a shock is given all at once that is the determining factor.
Chris@Rvengeperformance
07-04-2011, 05:30 PM
Shock is shock..the trans always gets shocked (unless it's an auto). I suppose to your point it's how much of a shock is given all at once that is the determining factor.
uh yeah, if you use the clutch right there is a lot less shock. Dumping the clutch is much worse. I also can launch at 1000 less rpm and get better 60FTs now.
HellBringer
07-04-2011, 06:27 PM
Why people decide to go to the track with no bell housing brace or a billet endcase if they're making that much power really baffles me.
Why people think you need that shit to successfully drag race really baffles me!!! I've put hundreds of passes on 3/s cars from stock to fairly heavily modded and NEVER EVER broke anything -- no 300M output shafts, no billet cases, welded in braces, 2-step, etc... Not even the OEM bracket that some 1st gens came with! All you need is good poly or solid motor mounts, NOT an overkill clutch from what you're trying to accomplish and good technique.
Pro Tip: Wheel spin is your friend.
All of that stuff is great, but it is definitely NOT needed unless you're trying to break records. The average weekend warrior trying to run 11's doesn't need any of that to be successful.
Alex3000gt
07-04-2011, 07:05 PM
Why people think you need that shit to successfully drag race really baffles me!!! I've put hundreds of passes on 3/s cars from stock to fairly heavily modded and NEVER EVER broke anything -- no 300M output shafts, no billet cases, welded in braces, 2-step, etc... Not even the OEM bracket that some 1st gens came with! All you need is good poly or solid motor mounts, NOT an overkill clutch from what you're trying to accomplish and good technique.
Pro Tip: Wheel spin is your friend.
All of that stuff is great, but it is definitely NOT needed unless you're trying to break records. The average weekend warrior trying to run 11's doesn't need any of that to be successful.
So because you personally never broke anything this means that others will not? Or are you saying that others are doing something wrong and this is causing things to break? Are bad motor mounts the root cause of most failures?
Please expand on this.
TurboSinceBirth
07-04-2011, 07:35 PM
Why risk a $300 bell housing brace install or a $200 transfercase bracket install for a $6k transmission? Oh let me get the Darwin award for those people. It doesn't change the fact that if it doesn't break on launches that it won't. We see more people breaking transmissions because there are more powerful affordable turbos available now. Just look at the billet TD04 and larger TD04 turbos available now when years back there was only 15G class turbos available. Couple that with the age of these cars. Do you not expect a 20 year old car with fatigued aluminum not to further propogate cracks between grain boundaries especially grain size differences because we all know cast aluminum isn't going to be uniform? Every time over the years the drivetrain has been shocked it will create intergranular crack initiation and propogation. You can't tell me that most of the 3S's haven't been beat on during their lifespan. That only makes it worse. There's only so much you can do to slip the clutch and spin the wheels. Those cracks on a microscopic level won't stay small forever.
dpartinvr4
07-04-2011, 08:05 PM
Why risk a $300 bell housing brace install or a $200 transfercase bracket install for a $6k transmission? Oh let me get the Darwin award for those people. It doesn't change the fact that if it doesn't break on launches that it won't. We see more people breaking transmissions because there are more powerful affordable turbos available now. Just look at the billet TD04 and larger TD04 turbos available now when years back there was only 15G class turbos available. Couple that with the age of these cars. Do you not expect a 20 year old car with fatigued aluminum not to further propogate cracks between grain boundaries especially grain size differences because we all know cast aluminum isn't going to be uniform? Every time over the years the drivetrain has been shocked it will create intergranular crack initiation and propogation. You can't tell me that most of the 3S's haven't been beat on during their lifespan. That only makes it worse. There's only so much you can do to slip the clutch and spin the wheels. Those cracks on a microscopic level won't stay small forever.
My car was a corporate lease vehicle all its life, it's had a chassis lube every 3k.... Giggidy
Keyan
07-04-2011, 08:16 PM
Our cars don't have zerk fittings so a "chassis lube" means NOTHING.
Sent from my DROIDX using Tapatalk
CoreyB
07-04-2011, 10:36 PM
You guys are way off topic.
Hym3n
07-04-2011, 11:36 PM
Why people think you need that shit to successfully drag race really baffles me!!! I've put hundreds of passes on 3/s cars from stock to fairly heavily modded and NEVER EVER broke anything -- no 300M output shafts, no billet cases, welded in braces, 2-step, etc... Not even the OEM bracket that some 1st gens came with!
Dude, since you're obviously SO much fucking better than all of us, why do you still troll here and 3si with your incessant garbage? Every post you make is more bullshit about how great you are and how much we all suck. We get it, you are god, your car, and more importantly, you, are far superior beings than the rest of us. So GTFO and let us be.
AudibleSilence
07-04-2011, 11:45 PM
Dude, since you're obviously SO much fucking better than all of us, why do you still troll here and 3si with your incessant garbage? Every post you make is more bullshit about how great you are and how much we all suck. We get it, you are god, your car, and more importantly, you, are far superior beings than the rest of us. So GTFO and let us be.
Well in Abe's defense..we're only human. :lol:
GTwizard
07-05-2011, 12:07 AM
OK, so back on topic. Yes a mortal man for sure. Although I did not drag race, (broke again) I did pass Ray on the straits while on the road course. He was not in his car but driving a fine VR4 none the less. He said he did everything he could to stop My NA from getting around him and than he could not keep up. A clean pass around Ray with an NA will be my clame to fame. LOL. This does not make him look bad as I think his first road course. But this was on the strait away. But My NA eats lots of VR4s,. so nothing new. I did not know it was Ray untill he told me later.
Broomfield Racing
07-05-2011, 12:11 AM
Are you joking?
Alex3000gt
07-05-2011, 12:21 AM
Why people think you need that shit to successfully drag race really baffles me!!! I've put hundreds of passes on 3/s cars from stock to fairly heavily modded and NEVER EVER broke anything -- no 300M output shafts, no billet cases, welded in braces, 2-step, etc... Not even the OEM bracket that some 1st gens came with! All you need is good poly or solid motor mounts, NOT an overkill clutch from what you're trying to accomplish and good technique.
Pro Tip: Wheel spin is your friend.
All of that stuff is great, but it is definitely NOT needed unless you're trying to break records. The average weekend warrior trying to run 11's doesn't need any of that to be successful.
So because you personally never broke anything this means that others will not? Or are you saying that others are doing something wrong and this is causing things to break? Are bad motor mounts the root cause of most failures?
Please expand on this.
Dude, since you're obviously SO much fucking better than all of us, why do you still troll here and 3si with your incessant garbage? Every post you make is more bullshit about how great you are and how much we all suck. We get it, you are god, your car, and more importantly, you, are far superior beings than the rest of us. So GTFO and let us be.
I am hoping he will expand on his earlier words.
I am, afterall, here to learn things about these cars. But last time I checked there were people with stock power levels wrecking transfer cases and output shafts.
UTRacerX9
07-05-2011, 12:29 AM
IIRC, Abram's car that he ran a 11.4 with back in the day had a 25 spline OS. Pretty sure he'd have broken an 18 spline if he had one.
TurboSinceBirth
07-05-2011, 01:39 AM
A 13T car is going to need some serious weight reduction to get in the 10s. Definitely not for the undertaking of the average person. Once the major stuff is out of the way the hacking away at it little by little becomes very challenging.
UTRacerX9
07-05-2011, 01:41 AM
A 13T car is going to need some serious weight reduction to get in the 10s. Definitely not for the undertaking of the average person. Once the major stuff is out of the way the hacking away at it little by little becomes very challenging.
I'd disagree with that a bit... A 9B car needs serious weight reduction to get into the 10's, and it's been done. With 13T's, it wouldn't need to be as extreme as gutting the car IMO.
terrets
07-05-2011, 03:45 AM
http://www.3sgto.org/f17/how-do-you-launch-your-car-5609.html#post104328
Cant wait to see the finished product Dillon, even though I know it will never truly be "finished".
HellBringer
07-05-2011, 10:28 AM
LOL
You guys are hilarious -- buncha whipped puppies that flinch anytime someone raises a hand...
It's not about me, nor does it have anything to do with me. You may not like me or my delivery, but I always speak from my own personal experience and the experiences I have observed from others. I do not go around regurgitating misinformed internet conjecture and assumptions not grounded in fact or reality. If more people around here spent more time listening and learning from those that have already done what they're trying to accomplish than whining about some self-inflicted inferiority complex like 9 year olds with a skinned knee maybe you'd be more successful at achieving your goals. With that out of the way....
My point was, as I have already stated, you absolutely do not need any drivetrain reinforcements to successfully run 11's or upper 10's (or more specifically safely execute 1.6 60's) any more than you need to build your engine to support 15g's.... Both are great to have, but are overkill as long as you have a reasonable launch technique and are willing to sacrifice a little ET for safety and/or make it up with power on the big end. All of these drivetrain reinforcements are relatively new advancements, yet people were successfully racing these cars for nearly a decade without them. Matt (as an example) ran hundreds of low 11's and mid/upper 10's across several different cars for years and for a long time the only thing I recall him ever breaking was a 6sp transfercase with over 100k miles on it. Ray broke a lot of parts back in the day, but his technique was different -- cut a 1.5 or better 60' to squeeze every .001th out of the available power. If you want to do that, then yes - you need all of the aforementioned reinforcements. Further, it's more about the 60' than the ET. A full-weight BPU car cutting a 1.6 60' is putting the same drivetrain stress as a full-weight DR1000 car cutting a 1.6 60 -- simple physics. But again, the average bolt-on turbo weekend warrior trying to run 11's shouldn't need any of that to race without breaking - I didn't, nor have dozens of others. I put lots of passes on my old DR650 VR-4 running mid/upper 11's and hundreds of street launches and never broke anything and never even killed a clutch -- it's all about technique and inducing wheelspin at the expense of a .1 or.2. My best runs were mid 1.6 60's roasting the tires through 1st gear. Wheelspin without wheelhop = safe and happy unreinforced drivetrain. I know I could've shaved some ET by coming out of the hold harder and cleaner, but I drove 100 miles to and from the track and never once had to call AAA. This is my own personal experience and not the parroting of someone elses that's never even seen a drag strip except from behind a monitor. I am by no means against any of those mods, and given the opportunity I would encourage them; however, they are certainly NOT requisites for successful racing with modest goals.
RE: 18-spline OS -- I would NOT recommend dragging an OEM 18-spline no matter what... However, I can tell you from personal experiencing dragging my buddy's BPU++++ Stealth and later DR500's that we never broke one back in the day. History has proven this to be very risky, though, and not a roll of the dice I'd be willing to take today.
Focus on the successes and not the failures and spend more time listening and learning than bitching and whining.
AudibleSilence
07-05-2011, 10:51 AM
^I would absolutely love to run you one day Abe..just for shits and giggles. I wish you lived closer.
AdamVR4
07-05-2011, 11:00 AM
LOL
You guys are hilarious -- buncha whipped puppies that flinch anytime someone raises a hand...
It's not about me, nor does it have anything to do with me. You may not like me or my delivery, but I always speak from my own personal experience and the experiences I have observed from others. I do not go around regurgitating misinformed internet conjecture and assumptions not grounded in fact or reality. If more people around here spent more time listening and learning from those that have already done what they're trying to accomplish than whining about some self-inflicted inferiority complex like 9 year olds with a skinned knee maybe you'd be more successful at achieving your goals. With that out of the way....
My point was, as I have already stated, you absolutely do not need any drivetrain reinforcements to successfully run 11's or upper 10's (or more specifically safely execute 1.6 60's) any more than you need to build your engine to support 15g's.... Both are great to have, but are overkill as long as you have a reasonable launch technique and are willing to sacrifice a little ET for safety and/or make it up with power on the big end. All of these drivetrain reinforcements are relatively new advancements, yet people were successfully racing these cars for nearly a decade without them. Matt (as an example) ran hundreds of low 11's and mid/upper 10's across several different cars for years and for a long time the only thing I recall him ever breaking was a 6sp transfercase with over 100k miles on it. Ray broke a lot of parts back in the day, but his technique was different -- cut a 1.5 or better 60' to squeeze every .001th out of the available power. If you want to do that, then yes - you need all of the aforementioned reinforcements. Further, it's more about the 60' than the ET. A full-weight BPU car cutting a 1.6 60' is putting the same drivetrain stress as a full-weight DR1000 car cutting a 1.6 60 -- simple physics. But again, the average bolt-on turbo weekend warrior trying to run 11's shouldn't need any of that to race without breaking - I didn't, nor have dozens of others. I put lots of passes on my old DR650 VR-4 running mid/upper 11's and hundreds of street launches and never broke anything and never even killed a clutch -- it's all about technique and inducing wheelspin at the expense of a .1 or.2. My best runs were mid 1.6 60's roasting the tires through 1st gear. Wheelspin without wheelhop = safe and happy unreinforced drivetrain. I know I could've shaved some ET by coming out of the hold harder and cleaner, but I drove 100 miles to and from the track and never once had to call AAA. This is my own personal experience and not the parroting of someone elses that's never even seen a drag strip except from behind a monitor. I am by no means against any of those mods, and given the opportunity I would encourage them; however, they are certainly NOT requisites for successful racing with modest goals.
RE: 18-spline OS -- I would NOT recommend dragging an OEM 18-spline no matter what... However, I can tell you from personal experiencing dragging my buddy's BPU++++ Stealth and later DR500's that we never broke one back in the day. History has proven this to be very risky, though, and not a roll of the dice I'd be willing to take today.
Focus on the successes and not the failures and spend more time listening and learning than bitching and whining.
I didn't really understand why everybody jumped your shit for your 1st post on the subject.
Can anyone name an instance of a 5 speed blowing up that hadn't experienced a t-case failure?
vr3.9
07-05-2011, 11:30 AM
LOL
If more people around here spent more time listening and learning from those that have already done what they're trying to accomplish .
This!
I am glad I came along after the basics on these cars have been proven over and over and over. I see a lot of strange things people do with there cars that really don't have anything to do with putting together a balance of parts and mods to support their goals.
UTRacerX9
07-05-2011, 11:41 AM
Can anyone name an instance of a 5 speed blowing up that hadn't experienced a t-case failure?
Steve68, calling Steve68... ;)
AudibleSilence
07-05-2011, 12:14 PM
I didn't really understand why everybody jumped your shit for your 1st post on the subject.
Can anyone name an instance of a 5 speed blowing up that hadn't experienced a t-case failure?
No, but I can name several 6 spds that died at stockish hp levels. People jumped on his shit because we were talking about welding braces into 6 spds and going billet xfer case/300m
AdamVR4
07-05-2011, 12:45 PM
No, but I can name several 6 spds that died at stockish hp levels. People jumped on his shit because we were talking about welding braces into 6 spds and going billet xfer case/300m
Oh yeah, I agree, the 6 speeds need it for sure. Didn't ukyo (from 3si) split his open at BPU levels years ago?
The drivetrain in a 25 spline 5 speed is quite stout as long as you don't split the t-case... For the longest time I had a brace that would allow the t-case the break but save the bell housing. The t-case never broke until I welded the CD -- then everything broke LOL ... That's why I agreed with his initial post with an exception for the 6 speeds.
AudibleSilence
07-05-2011, 12:58 PM
Remember Kris (Mitsuman) splitting his NEW 6spd the first time he launched his car? There was a pic of his 99 with a trail of fluid in front of it. I loved my 5spd.. I did an accidental 5->2 shift once coming off the highway when I was a newb...yea she wasn't happy and I blew a hole in the side, but she got me home with almost no fluid left..
AdamVR4
07-05-2011, 01:03 PM
Remember Kris (Mitsuman) splitting his NEW 6spd the first time he launched his car? There was a pic of his 99 with a trail of fluid in front of it. I loved my 5spd.. I did an accidental 5->2 shift once coming off the highway when I was a newb...yea she wasn't happy and I blew a hole in the side, but she got me home with almost no fluid left..
Holy shit, haha... I've been lucky enough to nail a couple of those 3->2 shifts (at WOT), but it never caused a trans failure. What broke in yours?
AudibleSilence
07-05-2011, 01:18 PM
Holy shit, haha... I've been lucky enough to nail a couple of those 3->2 shifts (at WOT), but it never caused a trans failure. What broke in yours?
http://img.photobucket.com/albums/v328/AudibleSilence/My%20Baby/IMG_0341.jpg
http://img.photobucket.com/albums/v328/AudibleSilence/My%20Baby/IMG_0342.jpg
http://img.photobucket.com/albums/v328/AudibleSilence/My%20Baby/IMG_0343.jpg
http://img.photobucket.com/albums/v328/AudibleSilence/My%20Baby/IMG_0344.jpg
This happened in Upstate NY on my way home from Emilie's old house (round 60 miles or so). I then drove it 75 more miles back Upstate to my buddy's house and towed it from there to GZP. It was pretty much bone dry when Hans pulled the drain plug.
AdamVR4
07-05-2011, 01:22 PM
This happened in Upstate NY on my way home from Emilie's old house (round 60 miles or so). I then drove it 75 more miles back Upstate to my buddy's house and towed it from there to GZP. It was pretty much bone dry when Hans pulled the drain plug.
I can sort of wrap my head around it breaking where the OS exits the bell housing, at least there's some potential axial load there... But the hole by the clutch fork... Did the clutch or FW fly apart?
AudibleSilence
07-05-2011, 01:28 PM
Dunno, but you know that sound a 12 speed bike makes when it is catching a gear? clack clack clack clack PING! Yea, my trans made that noise, and I had a plum of white smoke and the smell of burnt clutch. The cloud was so thick that guy at the light next to me gave a "Holy Shit!" look when I pulled up next to him. I suppose that is when the fluid came into contact with my exhaust?
Alex3000gt
07-05-2011, 06:56 PM
LOL
You guys are hilarious -- buncha whipped puppies that flinch anytime someone raises a hand...
It's not about me, nor does it have anything to do with me. You may not like me or my delivery, but I always speak from my own personal experience and the experiences I have observed from others. I do not go around regurgitating misinformed internet conjecture and assumptions not grounded in fact or reality. If more people around here spent more time listening and learning from those that have already done what they're trying to accomplish than whining about some self-inflicted inferiority complex like 9 year olds with a skinned knee maybe you'd be more successful at achieving your goals. With that out of the way....
My point was, as I have already stated, you absolutely do not need any drivetrain reinforcements to successfully run 11's or upper 10's (or more specifically safely execute 1.6 60's) any more than you need to build your engine to support 15g's.... Both are great to have, but are overkill as long as you have a reasonable launch technique and are willing to sacrifice a little ET for safety and/or make it up with power on the big end. All of these drivetrain reinforcements are relatively new advancements, yet people were successfully racing these cars for nearly a decade without them. Matt (as an example) ran hundreds of low 11's and mid/upper 10's across several different cars for years and for a long time the only thing I recall him ever breaking was a 6sp transfercase with over 100k miles on it. Ray broke a lot of parts back in the day, but his technique was different -- cut a 1.5 or better 60' to squeeze every .001th out of the available power. If you want to do that, then yes - you need all of the aforementioned reinforcements. Further, it's more about the 60' than the ET. A full-weight BPU car cutting a 1.6 60' is putting the same drivetrain stress as a full-weight DR1000 car cutting a 1.6 60 -- simple physics. But again, the average bolt-on turbo weekend warrior trying to run 11's shouldn't need any of that to race without breaking - I didn't, nor have dozens of others. I put lots of passes on my old DR650 VR-4 running mid/upper 11's and hundreds of street launches and never broke anything and never even killed a clutch -- it's all about technique and inducing wheelspin at the expense of a .1 or.2. My best runs were mid 1.6 60's roasting the tires through 1st gear. Wheelspin without wheelhop = safe and happy unreinforced drivetrain. I know I could've shaved some ET by coming out of the hold harder and cleaner, but I drove 100 miles to and from the track and never once had to call AAA. This is my own personal experience and not the parroting of someone elses that's never even seen a drag strip except from behind a monitor. I am by no means against any of those mods, and given the opportunity I would encourage them; however, they are certainly NOT requisites for successful racing with modest goals.
RE: 18-spline OS -- I would NOT recommend dragging an OEM 18-spline no matter what... However, I can tell you from personal experiencing dragging my buddy's BPU++++ Stealth and later DR500's that we never broke one back in the day. History has proven this to be very risky, though, and not a roll of the dice I'd be willing to take today.
Focus on the successes and not the failures and spend more time listening and learning than bitching and whining.
Thanks for the clarification (sans the personal insults - which I assume were directed at the other guy).
What do you mean by slipping the clutch and allowing for wheel spin. Coming from the FWD world this logic seems backwards to me. The more you slip the clutch - the less wheel spin you have. Whereas the less you slip the clutch the more wheelspin you have.
Is the goal to combine the two of these and avoid wheel hop? Is wheel hop almost eliminated with solid motor mounts - in my experience (FWD) it is.
AdamVR4
07-05-2011, 07:13 PM
Thanks for the clarification (sans the personal insults - which I assume were directed at the other guy).
What do you mean by slipping the clutch and allowing for wheel spin. Coming from the FWD world this logic seems backwards to me. The more you slip the clutch - the less wheel spin you have. Whereas the less you slip the clutch the more wheelspin you have.
Is the goal to combine the two of these and avoid wheel hop? Is wheel hop almost eliminated with solid motor mounts - in my experience (FWD) it is.
As has been discussed, the goal is simply to reduce the impact loading on the drive train. As I'm sure you know, predicting actual stresses induced by an impact is pretty hand-wavey, but the point is clear... ~2 to ~8 times the actual applied load. Wheel hop is nothing more than a relatively high frequency impact loading scenario. Clean wheel spin and riding the clutch out of the hole are simply alternative ways to reduce the impact. Traction will determine which technique you use. Wrinkle wall slicks and pre-loading the drivetrain are additional ways to reduce shock.
My drag radials were just sticky enough to bounce like crazy at the track.
Try to wrap your head around the shock loading that takes place inside the drivetrain due to the behavior of the stock center differential. Compare that to a welded center diff. I've got my own thoughts on the subject but I may be wrong, and I don't want to bias anyone that takes the time to think through it.
Alex3000gt
07-05-2011, 07:51 PM
Nice sig picture, by the way.
HellBringer
07-05-2011, 09:49 PM
What do you mean by slipping the clutch and allowing for wheel spin. Coming from the FWD world this logic seems backwards to me. The more you slip the clutch - the less wheel spin you have. Whereas the less you slip the clutch the more wheelspin you have.
I never specifically mentioned anything about slipping the clutch, so not sure where that came from. On the matter, though - I do not advocate slipping any clutch (other than a carbon/carbon or similar) any more than absolutely necessary to get the car moving and the wheels spinning. Organic and Kevlar compounds will burn, glaze and chunk off with too much slip and metallic compounds will weld/fuse the disk to either the pressure plate and/or the flywheel or floater. Neither (metallic especially) are designed nor intended to be slipped any more than the absolute bare minimum to get the car out of hole -- riding the clutch out will kill either VERY quickly. They guys that are only getting 10-15k out of a clutch are slipping WAY too much. The solution to this problem is wheelspin; however, the caveat is wheelhop will absolutely break shit (more on this in sec) more so than a head-hook. The key to a good launch is coming out of the hole in an RPM range where the turbos are already lit with enough wheelspin to keep the RPM's in that range or above until 100% traction is achieved. There is a balance there, where the launch can be too aggressive and the wheelspin can be too severe (FWD and RWD guys know all about this). The upside to that scenario is while the launch and run is blown, your drivetrain is not. My method was to start with way too much tire pressure (40-45psi) so that wheelspin was easily induced, and then start backing the pressure down to more reasonable levels to suit the conditions that day. With this method, my launch RPM and clutch engagement stayed relatively static, and I made the adjustments to tire pressure first; this allowed for more consistency and repeatability. As for wheelhop - this is an evil that most times cannot be predicted or foreseen. The tendency to wheelhop (in my experience) varied greatly depending on track conditions/prep, temperature, etc... You simply have to train yourself to get out of the pedal as soon as wheelhop is induced. Drag radials will significantly increase the likelihood of wheelhop, and after lots of observation, I wouldn't really recommend them for a heavy AWD car any longer (on the track, at least). Solid/poly mounts won't really mitigate wheelhop specifically, but they absolutely help keep your drivetrain alive under launch conditions. A heavily-damped/stiff suspension will assist as well, as contrary to RWD platforms, you want to minimize the weight transfer in AWD. One of the worst things that happens (and these cars are very prone to it) is where all the weight transfers to the rear, it heavily squats, the front tires unload and attempt to spin and then you induce a front to rear oscillation of torque -- this is not only not an inefficient launch, but is very unhealthy for your drivetrain. Anyhey.... Enough of my ramblings on the matter for now.
RE: 6 speeds -- I think the case splitting is somewhat over-rated. A percentage of these fall into the 'shit happens' category (like busting one on the first pass) but a lot of the case failures at low to mid power levels are a result of poor technique, IMO. And again, the case failures seem to be somewhat new in the grand scheme. I never recall any of this happening back in the day. In fact, way back when, the 6 speed was considered indestructible compared to the 5 speed because OS and TC failures were almost unheard of, whereas the 5 speeds stripped/break OS and/or broke TC's. Case in point - I had a buddy back in the day with a '96 VR-4 that was running mid 12's straight BPU and cutting mid 1.6 with the occasional 1.5 60' and when we pulled his tranny due to loosing reverse (unrelated to racing) the OS and case were in absolutely perfect shape. I have never personally witnessed a 6 speed failure of any kind among the dozen or so cars that I was around when we were racing. In fact, the only 5 speed failure I witnessed was an 18-spline OS on the receiving end of a 6000RPM launch on a freshly broken in RPS 6-puck.
R/T93
07-05-2011, 10:05 PM
Here is how you launch without breaking shit.
http://www.youtube.com/watch?v=xRdt3XShMuI
notice the wheelspin, these guys are not sidestepping the clutch on launch. Also check out the nifty AWD doing its thing.
AudibleSilence
07-05-2011, 10:15 PM
I never specifically mentioned anything about slipping the clutch, so not sure where that came from. On the matter, though - I do not advocate slipping any clutch (other than a carbon/carbon or similar) any more than absolutely necessary to get the car moving and the wheels spinning. Organic and Kevlar compounds will burn, glaze and chunk off with too much slip and metallic compounds will weld/fuse the disk to either the pressure plate and/or the flywheel or floater. Neither (metallic especially) are designed nor intended to be slipped any more than the absolute bare minimum to get the car out of hole -- riding the clutch out will kill either VERY quickly. They guys that are only getting 10-15k out of a clutch are slipping WAY too much. The solution to this problem is wheelspin; however, the caveat is wheelhop will absolutely break shit (more on this in sec) more so than a head-hook. The key to a good launch is coming out of the hole in an RPM range where the turbos are already lit with enough wheelspin to keep the RPM's in that range or above until 100% traction is achieved. There is a balance there, where the launch can be too aggressive and the wheelspin can be too severe (FWD and RWD guys know all about this). The upside to that scenario is while the launch and run is blown, your drivetrain is not. My method was to start with way too much tire pressure (40-45psi) so that wheelspin was easily induced, and then start backing the pressure down to more reasonable levels to suit the conditions that day. With this method, my launch RPM and clutch engagement stayed relatively static, and I made the adjustments to tire pressure first; this allowed for more consistency and repeatability. As for wheelhop - this is an evil that most times cannot be predicted or foreseen. The tendency to wheelhop (in my experience) varied greatly depending on track conditions/prep, temperature, etc... You simply have to train yourself to get out of the pedal as soon as wheelhop is induced. Drag radials will significantly increase the likelihood of wheelhop, and after lots of observation, I wouldn't really recommend them for a heavy AWD car any longer (on the track, at least). Solid/poly mounts won't really mitigate wheelhop specifically, but they absolutely help keep your drivetrain alive under launch conditions. A heavily-damped/stiff suspension will assist as well, as contrary to RWD platforms, you want to minimize the weight transfer in AWD. One of the worst things that happens (and these cars are very prone to it) is where all the weight transfers to the rear, it heavily squats, the front tires unload and attempt to spin and then you induce a front to rear oscillation of torque -- this is not only not an inefficient launch, but is very unhealthy for your drivetrain. Anyhey.... Enough of my ramblings on the matter for now.
RE: 6 speeds -- I think the case splitting is somewhat over-rated. A percentage of these fall into the 'shit happens' category (like busting one on the first pass) but a lot of the case failures at low to mid power levels are a result of poor technique, IMO. And again, the case failures seem to be somewhat new in the grand scheme. I never recall any of this happening back in the day. In fact, way back when, the 6 speed was considered indestructible compared to the 5 speed because OS and TC failures were almost unheard of, whereas the 5 speeds stripped/break OS and/or broke TC's. Case in point - I had a buddy back in the day with a '96 VR-4 that was running mid 12's straight BPU and cutting mid 1.6 with the occasional 1.5 60' and when we pulled his tranny due to loosing reverse (unrelated to racing) the OS and case were in absolutely perfect shape. I have never personally witnessed a 6 speed failure of any kind among the dozen or so cars that I was around when we were racing. In fact, the only 5 speed failure I witnessed was an 18-spline OS on the receiving end of a 6000RPM launch on a freshly broken in RPS 6-puck.
Two things:
1) Slipping the clutch when you make boku power = bad as you've pointed out. Example: BenH fused his clutch to the flywheel once....not cool. Wheel Hop is the devil..there are ways to mod the suspension to counter it though.
2) The part of the 6spd that fails is the brace, and to date everyone that I know of with a mid to higher hp 6spd without a brace has killed at least one housing. You keep naming single examples of either yourself or a 'friend.' Sorry brother but there are a lot more that prove your examples to be the exception, not the rule.
HellBringer
07-05-2011, 10:41 PM
You keep naming single examples of either yourself or a 'friend.' Sorry brother but there are a lot more that prove your examples to be the exception, not the rule.
As I've previously stated, I provide feedback relative to my own personal experiences and those immediately around me, first and foremost. However, I have also been a watchful observer of this platform and those racing these cars for over a decade and have derived some of my opinions based on that data as well. So 'everyone you know' doesn't trump the hundreds of accounts of historical data clearly documented and discussed in the bowels of another forum, IMO. Just because I call out specific examples of a 'friend' doesn't mean my experienced is limited to that....
AudibleSilence
07-05-2011, 10:45 PM
No not limited to that, but I don't think it takes into account the glaring obviousness of the issue at hand. If 6 out of 10 people that race their car hard have failures, it might just be a problem Or dumb luck. Being that the statistical probability that it's an issue is higher than 50% therefore I can't turn a blind eye and chalk it up to a bad experience.
HellBringer
07-05-2011, 10:52 PM
I would firmly disagree with a 60% historical failure rate (or even a fraction of that), but we can just leave it at that.
JasonY
07-05-2011, 10:59 PM
6spd w/o a BH brace isnt a matter of IF but WHEN its gonna fail. Assuming the car has any power and good tires. Track prep means a lot too, probably more than anything else. Ive raced on some tracks where your shoes stick to the track and my 275 DR's didnt even chirp cutting a high 1.5 60ft and some where i could spin all of 1st gear and kick the ass out grabbing 2nd...
When i broke i usually never made it to the 60ft mark under power. Just a snap or a metallic bang on launch and i only broke when the track was very well prepped. I NEVER broke a part when i was able to get wheel spin.
Jason
J. Fast
07-05-2011, 11:14 PM
I would have to disagree that the failure rate is that high. Furthurmore, I dont think anyone has ever posted a thread involving putting a transmission back together like a crashed airplane to investigate the reasoning for it falling out of the sky. The subject matter has always been taboo, and the last time I checked none of the guys breaking shit are professional racecar drivers either. The way I see it, only thing that separates everyone is the driver and said launch technique.
I would have to disagree that the failure rate is that high. Furthurmore, I dont think anyone has ever posted a thread involving putting a transmission back together like a crashed airplane to investigate the reasoning for it falling out of the sky. The subject matter has always been taboo, and the last time I checked none of the guys breaking shit are professional racecar drivers either. The way I see it, only thing that separates everyone is the driver and said launch technique.
are you sure about that?
AudibleSilence
07-05-2011, 11:35 PM
I would have to disagree that the failure rate is that high. Furthurmore, I dont think anyone has ever posted a thread involving putting a transmission back together like a crashed airplane to investigate the reasoning for it falling out of the sky.
Wrong.
i3igpete
07-05-2011, 11:35 PM
The way I see it, only thing that separates everyone is the driver and said launch technique.
did anybody know about matt monet's t-case preload mod until he put it up for sale? it's a simple, elegant solution that nobody else thought of.
every shop has little secrets to keep them faster than the next guy.
AudibleSilence
07-05-2011, 11:46 PM
Remember Kris (Mitsuman) splitting his NEW 6spd the first time he launched his car?
Found it, but I had the story a bit off:
Well, i was on my way to the EASTON, PA gathering to go drink up with the crew, and bust there balls on the street, but on my way, there was a huge accident on the highway, so my ass had to back up over an overpass with a trailer...anyways, took the car off the trailer because it was to much of a pain in the ass to continue backing down (had to disconnect my trailer and turn it around). So, my friend that was coming down with me drove my truck, and i drove my car and were like alright, lets just strole over to ur cousins for a few, get the car back on the trailer, then roll down to E-Town.....well, I decide to take my cousin out for a ride.....and this happens
http://img.photobucket.com/albums/v723/Mitsuman03/Picture021.jpg
http://img.photobucket.com/albums/v723/Mitsuman03/Picture023.jpg
http://img.photobucket.com/albums/v723/Mitsuman03/Picture027.jpg
http://img.photobucket.com/albums/v723/Mitsuman03/Picture031.jpg
http://img.photobucket.com/albums/v723/Mitsuman03/Picture032.jpg
haha ya, its cracked all around...thing that i dont get is. as i look at it more and more, i wasn't launchin the car, i was just putting it in gear and it locked up, i let off the clutch and bam..just broke...im almost sold that my transfercase locked up..i noticed in my garage at home that my xcase oil is on the ground...hmmm..my seal seems to have gone..cuz that SOB was whinning pretty bad, it obviously wasn't my tranny, tranny was full of fluid..proof that's still on the road.
Meh, I remember a few 6spds going through this...back in the day.
CoopKill
07-05-2011, 11:56 PM
as stated not caused by the 6sp
J. Fast
07-05-2011, 11:56 PM
Wrong.
I still disagree. I mean straight up, you're not a racecar driver or a crew chief right? Real drivers are robots. Every shift is the same, every launch is the same, and they do it within 0.00x of a second accuracy every time and consistantly shift in the same window as well. Everyone here has observed lots and lots of of 3/S weekend warriors, seen lots of missed shifts, and witnessed hundreds of 60's and trap speeds all over the map. If someone cut the line every time at 1.555 and had the same 60 and same 1000ft everytime and they were breaking shit everytime you may be on to something. No one I have ever observed, nor heard of has ever posted robotic back to back to back to backs. Even the legends. A part of their technque seems to change everytime.
One thig that does seem odd, the drivers observed using the same technique with repetition in consistant windows are somehow able to keep their cars together.
J. Fast
07-06-2011, 12:17 AM
did anybody know about matt monet's t-case preload mod until he put it up for sale? it's a simple, elegant solution that nobody else thought of.
every shop has little secrets to keep them faster than the next guy.
That sounds interesting and right on par with the reality of there's always going to be secrets in racing, that's part of the game and competitve edge. What I was trying to illustrate is let's say Joe Blow lends his 700hp car to Mario Andretti and he rapes the piss out of it on a dragstrip. Puts down robot like 10.200- 10.195 passes like clock work (banging passes like shep pulling 9.7's in his street car). Andretti gives Joe his car back and says "go for it" and the drivetrain comes apart. Some kid posts a U-Tube of it coming apart and low and behold in short time it's announced to the world said drivetrain is made of glass. Just doesn't make sense.
i3igpete
07-06-2011, 12:34 AM
yup. the reason why the legends never seem to break is because when they break they fix it and don't tell anyone. at least, until the fix is ready for sale ;)
exactly.
when questioned I know most of the big names have a good sized collection of broken parts in their garage, Taz is one of my favorites as when something breaks he lets everyone know ;)
AdamVR4
07-06-2011, 12:54 AM
I still disagree. I mean straight up, you're not a racecar driver or a crew chief right? Real drivers are robots. Every shift is the same, every launch is the same, and they do it within 0.00x of a second accuracy every time and consistantly shift in the same window as well. Everyone here has observed lots and lots of of 3/S weekend warriors, seen lots of missed shifts, and witnessed hundreds of 60's and trap speeds all over the map. If someone cut the line every time at 1.555 and had the same 60 and same 1000ft everytime and they were breaking shit everytime you may be on to something. No one I have ever observed, nor heard of has ever posted robotic back to back to back to backs. Even the legends. A part of their technque seems to change everytime.
One thig that does seem odd, the drivers observed using the same technique with repetition in consistant windows are somehow able to keep their cars together.
Technique changes because parts change. When I had the RPS pressure plate and a stock disk, I never broke anything and ran back to back to back to back 11.1's... Then I got the 6 puck and welded center diff, then the RPS CC, then ditched the DR's for QTP's... Every step along the way I've only had a few launches before it broke again. The RPS CC requires your left foot to move in the opposite direction to make it slip because of the way the friction coefficient increases with temperature. Tough to break old habits in so few passes.
I very much agree with just about everything Hellbringer said in his last post. The best technique I found for launching was to go WOT and then come out on the clutch very quickly and hesitate for a fraction of a second at the release point before coming all the way off.
TurboSinceBirth
07-06-2011, 01:00 AM
I raced my 92 quite a bit even though it was only BPU and I still cracked a transfercase. My launch technique was fine and the street tires were horrible at gripping. I had too many launches and many miles on it which is what led to its demise. I never had a problem after a transfercase brace, but I also had put low mileage parts in too. The 93 hasn't seen any street or track action, but it's a whole new power goal that will break parts left and right since it'll be exceeding the factory designed power by 2.5x+. More people are going to see failures in 6-speeds than 5s. The 6-speeds weren't a very good design but not as bad as some other transmissions like in the EVOs and STIs. The 5 speeds generally hold up better especially the 25-splines. I've been in 4 different 6-speeds that cracked their cases. There was nothing wrong with the launch or technique. It ranged from DR-500s to E16Gs. Oddly enough 3 out of the 4 of them broke when the car was moving 40+ mph. Having been in both situations I'm more of an advocate of preventative insurance for the trannys and transfercases because sure they won't break all the time, but it is going to happen sooner or later.
AdamVR4
07-06-2011, 01:04 AM
Local buddy of mine broke the t-case in his 92 VR4 (300m 18 spline OS)... There was NO grip on the track that night. We were spinning the tires like crazy until the sun gear welded to the output shaft, the VCU split open and the t-case exploded.
So yes, you can have too much wheel spin too.
terrets
07-06-2011, 02:35 AM
That video was awesome..So was reading what you guys think :).
Ray Pampena
07-06-2011, 03:06 PM
did anybody know about matt monet's t-case preload mod until he put it up for sale? it's a simple, elegant solution that nobody else thought of.
every shop has little secrets to keep them faster than the next guy.
that was my t case i sold him. that preload deal worked awesome. it was before the billet mid cases were available.
doing this shit for a living and racing these cars for 12 years... the 6 speeds need a brace if you have any type of serious clutch AND your gonna race it OFTEN. the case fatigues over time and will break. in the short term.. they seem to last a while.
when i bought my red 96, i wanted to get a brace in there asap. before i could, i ended up racing a friends big block nova. i was a PUSSY coming out of the hole... i was gonna ride the clutch hard. my foot never left the pedal and that shit broke and destroyed all of the parts inside. that transmission was a rebuild from the previous owner. whoever had that tranny must have raced here and there and it was ready to go by the time i went to race. the parts are only getting older and the failures are far more common.
just like me.. Matt M broke plenty of shit! its part of racing and part of winning. i can be easier on the parts but id also be .5sec slower. people always have me drive their cars when they want to see how fast the car can actually go lol
AudibleSilence
07-06-2011, 03:37 PM
Sooooo now that Ray has said what the rest of us have been saying as well, can we agree that the 6spd NEEDS a brace and move on?
vr3.9
07-06-2011, 04:10 PM
just like me.. Matt M broke plenty of shit! its part of racing and part of winning. i can be easier on the parts but id also be .5sec slower. people always have me drive their cars when they want to see how fast the car can actually go lol
I would rather be .5 seconds slower. Unless of course Ray lets me drive his car. :)
Chris@Rvengeperformance
07-06-2011, 04:38 PM
that was my t case i sold him. that preload deal worked awesome. it was before the billet mid cases were available.
doing this shit for a living and racing these cars for 12 years... the 6 speeds need a brace if you have any type of serious clutch AND your gonna race it OFTEN. the case fatigues over time and will break. in the short term.. they seem to last a while.
when i bought my red 96, i wanted to get a brace in there asap. before i could, i ended up racing a friends big block nova. i was a PUSSY coming out of the hole... i was gonna ride the clutch hard. my foot never left the pedal and that shit broke and destroyed all of the parts inside. that transmission was a rebuild from the previous owner. whoever had that tranny must have raced here and there and it was ready to go by the time i went to race. the parts are only getting older and the failures are far more common.
just like me.. Matt M broke plenty of shit! its part of racing and part of winning. i can be easier on the parts but id also be .5sec slower. people always have me drive their cars when they want to see how fast the car can actually go lol
Ray, what do you think makes the 5 speed bellhousing so much stronger? I've only heard of 1 breaking that didn't have a t-case explode at around the same time.
AudibleSilence
07-06-2011, 04:50 PM
Isn't the 6spd the same physical size as the 5 spd but with an extra gear crammed in there?
HellBringer
07-06-2011, 09:08 PM
Sooooo now that Ray has said what the rest of us have been saying as well, can we agree that the 6spd NEEDS a brace and move on?
The point that's been echoed is if you're making big power and/or have an unforgiving clutch and/or plan to race every weekend then yes - you will likely need a brace. I will maintain that for the average 3/s street car setup, occasional track racer making modest power with modest goals (mid/low 11's) then it's not an absolute requisite. Shit does happen, though; if you plan to race then plan to break. They've all got an expiration date, it's just not printed on them. ;) I will reiterate one of my original statements of NOT having an overkill clutch. I've said all along a full-faced Stage 2 or similar clutch is more than sufficient for 90% of the users out there. The guys that are running superduper Stage 18.7++ clutches on their 13g car are just asking to unnecessarily break drivetrain parts. I put 30k miles on an RPS Stage 2 and RPS flywheel, ran lots of 11 second passes, dozens of low 12's, hundreds of street launches, AWD burnouts, etc.. and that clutch still had plenty of life when I sold the car.
I do recall seeing a thread on the other site way back when where there was some thorough analysis and hypothesis on the case failures. Fairly certain the root cause is not a mystery.
Ray Pampena
07-06-2011, 10:06 PM
i think were all kind of agreeing here...
i broke my 5 speed bellhousing in 06 or so. i since then did a brace in that too. the reason any of them break is from the counter shaft getting pushed apart from the main shaft. it breaks out the counter shaft bearing register then obviously bad things happen. the 6 speed seems weaker than the 5 speed due to the steeper 1st gear being a higher tq multiplier. if the 6 speed was launching in second, thered never be an issue lol
onebadmollafolla
07-07-2011, 02:42 PM
Alright, this is my last one. I promise.
http://i.imgur.com/gP9iQ.jpg
R/T93
07-07-2011, 04:48 PM
lol, should have been 19t's Dumbldr hahha
lawdogg
07-07-2011, 08:11 PM
that was my t case i sold him. that preload deal worked awesome. it was before the billet mid cases were available.
doing this shit for a living and racing these cars for 12 years... the 6 speeds need a brace if you have any type of serious clutch AND your gonna race it OFTEN. the case fatigues over time and will break. in the short term.. they seem to last a while.
Hey Ray, you mean a bellhousing brace, right?
JasonY
07-07-2011, 08:16 PM
He's talking about the 5spd TC mid case which people started tearing off after the main case wasnt breaking anymore.
Jason
lawdogg
07-07-2011, 08:33 PM
Oh, ok. Which part of the 6spd drivetrain was he saying fatigues?
In the first part of his post he's talking the 5 speed Transfer case, in the second part of his post he's talking about the 6 speed bellhousing.
lawdogg
07-07-2011, 08:51 PM
Ok sweet!!! Thanks! Trying to take all necessary precautions before putting my 6spd in.
with the brace and the endcase your in pretty damn good shape.
Ray has the endcase group buy here: 3000GT/Stealth International Message Center (http://www.3si.org/forum/f4/broomfield-racing-6-speed-end-cover-group-buy-522146/)
:D
all we're left with afaik is to beef up the 6 speed transfer case gears :) no solution for that yet...but then again not many people are breaking them!!
Ray Pampena
07-08-2011, 09:26 AM
In the first part of his post he's talking the 5 speed Transfer case, in the second part of his post he's talking about the 6 speed bellhousing.
correcto
Alex3000gt
07-09-2011, 01:41 AM
A surprisingly good conversation came out of this.
Thanks everyone.
2fnloud
07-09-2011, 01:48 AM
with the brace and the endcase your in pretty damn good shape.
Ray has the endcase group buy here: 3000GT/Stealth International Message Center (http://www.3si.org/forum/f4/broomfield-racing-6-speed-end-cover-group-buy-522146/)
:D
all we're left with afaik is to beef up the 6 speed transfer case gears :) no solution for that yet...but then again not many people are breaking them!!
I little birdie said he MAY start developing said gears ;)
dpartinvr4
07-09-2011, 02:19 PM
Any suggestions on finding a formula for my plx wideband to read afr into my hhh datalogger?
vr3.9
07-09-2011, 02:25 PM
If you have a scanmaster it's pretty easy. You change a setting on the Sanmaster and it will read for the battery voltage on the HHH. I was glad I didn't have to figure out that formula stuff.
dpartinvr4
07-09-2011, 02:54 PM
I might just have to email neil at hhh, because i cant get it to give me anythin in tenths...i.e 10.1, it will only do whole numbers
Try this. Got it from a thread on the HHH forum.
Description: Air/Fuel Ratio 2
Formula: ($pid*0.03921569)+10
Sensor ID: 18
Lower limit: 10
Upper limit: 20
Precision: 2
dpartinvr4
07-10-2011, 10:00 PM
that seems to have done the trick except mine is in PID 73 not 18, but that doesn't matter,thanks.
dpartinvr4
07-10-2011, 10:16 PM
hey, so If i wire my 2 step to the clutch sensor, how soon will it engage/disengage in relation to pedal depression?
It senses you press the clutch at the same point as the cruise control would kick off when you press the clutch. Right at the top of the pedal movement.
cjbyron
07-19-2011, 02:31 PM
hey, so If i wire my 2 step to the clutch sensor, how soon will it engage/disengage in relation to pedal depression?
Depends on which switch you connect to. There are two of them. One for cruise control and one for starter safety. The starter safety one is at the bottom throw of the pedal. Depending on your setup you can also ignore using a clutch switch to engage/disengage and instead use mph. For many setups that is better so that you can still play with clutch pedal postion but not have any undesirable effect on on/off the 2 step.
mb3000
10-21-2011, 12:11 AM
Updates?
dpartinvr4
10-22-2011, 11:34 AM
update is as follows: Car is in a barn for the winter, awaiting a new clutch.
green-lantern
10-22-2011, 11:37 AM
Ray P would have been done by now and having dinner with Chuck Norris. :p
mb7050
10-22-2011, 11:43 AM
I´m fairly certain Ray is still immortal
GTO Assassin
10-22-2011, 05:30 PM
Ray doesn't have dinner with Chuck. Chuck calls and makes the appointment with Ray - but only if he feels like it.
Scotty
Ray Pampena
11-12-2011, 10:09 AM
you guys effin kill me hahaa
Emilie@GZP
11-12-2011, 10:18 AM
Ray doesn't have dinner with Chuck. Chuck calls and makes the appointment with Ray - but only if he feels like it.
Scotty
I heard they recently had dinner together... Chuck Norris has been missing ever since....
whitedragon
11-12-2011, 10:18 AM
you guys effin kill me hahaa
How do you have time to post...aren't you supposed to be packing for your move to STL?
Ray Pampena
11-12-2011, 10:26 AM
maybeee im already IN STL
neverenoughhp
11-12-2011, 12:34 PM
I hate when people dont read a whole thread and post but damn 20 pages. I read the first two and skipped to the end. I'll be nice but it is clear you are new to this platform and have a lot to learn. It sounds like you have been down the track and you have a goal in mind so I respect that. Your goal is obtainable as well. But, as Im sure has been said on every one of these 20 pages you are going to have to drop a lot of weight, cut a nasty 60' time, and shift like a mo-fo. 3000 rpm launches are not going to cut it. 5500 - 6000 rpms with some sticky tires and hope the drivetrain stays together. You are going to need race fuel and/or meth and 20+ psi.
Dan (madogg) has a 13t car that is well tuned but pretty much a full weight street car. He took a couple things out of it at the track and ran a 11.6 at 117 ish. He is an excellent driver. Just giving you another point of reference.
I hope you dont think Im bashing you b/c Im not. I knew my dr500 car (smaller turbo than 13ts) could run 10s and everyone on here told me I was crazy. I actually built the car so it would be capable to run 10s but I never did it. I ran an 11.4 spinning 1st and 2nd gear only b/c the track management was terrible (no vht). Trapping 125 mph with slicks and only 3200 lbs let me know for sure it was capable. Hell it probably could have done 10.8s. That was the last track day of the year, I tried to beef up the tranny over the winter and 3 years after that I look back at nothing but tranny problems. Just want to be clear that I a am not saying you cant do it. But it will take some work. Good luck
vr3.9
11-12-2011, 02:08 PM
....... I tried to beef up the tranny over the winter and 3 years after that I look back at nothing but tranny problems. Just want to be clear that I a am not saying you cant do it. But it will take some work. Good luck
Tranny problems, my Achilles heel as well. Only one pass this year. 13.7 @ 110 with a 3 second shift from first to second. Second just locks me out. The only good thing was I was racing my daughter in her NA stealth. Just looked like I was waiting on her, to make it fair.
green-lantern
11-12-2011, 04:20 PM
How do you have time to post...aren't you supposed to be packing for your move to STL?
maybeee im already IN STL
???? You're moving/moved?
anyonebutme
11-12-2011, 07:26 PM
???? You're moving/moved?
STL is taking over the 3S world....
terrets
11-12-2011, 07:30 PM
Ray, I think you should stop in WI and show me your BEAST.
nodoze
11-12-2011, 08:48 PM
responding to a couple of post ahead i have a customer who is running 11.2 in his 13t stock weight vr4 , fully built (by me ) engine . .... stock suspension though weight shifts like nobodys buisness . now he fragged the tranny and i have it rebuilt with sce front and center diff, i fully believe with suspension and that trans he will dip into the high tens . its do able , everyone laughed at me when i said i wanted to do 500 awhp on td04's well i did it as well on this car . anything is possible man do your research and stay at it
responding to a couple of post ahead i have a customer who is running 11.2 in his 13t stock weight vr4 , fully built (by me ) engine . .... stock suspension though weight shifts like nobodys buisness . now he fragged the tranny and i have it rebuilt with sce front and center diff, i fully believe with suspension and that trans he will dip into the high tens . its do able , everyone laughed at me when i said i wanted to do 500 awhp on td04's well i did it as well on this car . anything is possible man do your research and stay at it
I hope if your dragging that you've done the beef up plates as well.
nodoze
11-13-2011, 07:53 PM
yea not my car customers and yes i had them welded in
lucasred
11-13-2011, 11:04 PM
So, what you are suggesting is that Ray is "merely human"?
Man, I'm not standing next to you in a lightening storm.
vr3.9
11-14-2011, 01:12 AM
responding to a couple of post ahead i have a customer who is running 11.2 in his 13t stock weight vr4 , fully built (by me ) engine . .... stock suspension though weight shifts like nobodys buisness . now he fragged the tranny and i have it rebuilt with sce front and center diff, i fully believe with suspension and that trans he will dip into the high tens . its do able , everyone laughed at me when i said i wanted to do 500 awhp on td04's well i did it as well on this car . anything is possible man do your research and stay at it
you did 500awhp on 13T's? would love to see some proof. Not doubting it's just the old record stood a long time till I broke it. I could use a little motivation.
whitedragon
11-14-2011, 01:20 PM
STL is taking over the 3S world....
Now you know why I wanted to talk to you about helping me finish my basement!
AdamVR4
11-14-2011, 01:34 PM
I hope you dont think Im bashing you b/c Im not. I knew my dr500 car (smaller turbo than 13ts) could run 10s and everyone on here told me I was crazy. I actually built the car so it would be capable to run 10s but I never did it. I ran an 11.4 spinning 1st and 2nd gear only b/c the track management was terrible (no vht). Trapping 125 mph with slicks and only 3200 lbs let me know for sure it was capable. Hell it probably could have done 10.8s. That was the last track day of the year, I tried to beef up the tranny over the winter and 3 years after that I look back at nothing but tranny problems. Just want to be clear that I a am not saying you cant do it. But it will take some work. Good luck
Similar story here... Hundreds of passes followed by years of transmission problems. I was fortunate to get a handful of 10-second slips, but it comes with a heavy price in terms of time and dollars... And I haven't even had to build the engine!
AdamVR4
11-14-2011, 01:36 PM
Second just locks me out.
That used to be a damn nearly weekly Saturday repair for me. 2nd gear is really easy -- just pop off the bell housing.
dpartinvr4
04-29-2012, 10:28 PM
So, it looks like I'll be fighting fire with fire, I will be ordering a stage two pampena short block, and rebuilt heads in the next week :)
KeithMac
05-01-2012, 04:52 PM
Straight cut, dogged gears and powershifting, nothing trying to push the shafts apart and no synchro lock-out..
chansigril
05-01-2012, 06:25 PM
how *did* i miss this thread.
VR-4 0wnz j00
05-02-2012, 10:28 AM
When you said a quest, you werent joking. Over a year and you still dont have a good shortblock, lol.
vroom4
05-02-2012, 12:22 PM
Frodo didnt get to mordor in a day! It took 3 long ass movies!
Alex3000gt
05-02-2012, 04:31 PM
Nothing yet?
green-lantern
05-02-2012, 06:05 PM
Frodo didnt get to mordor in a day! It took 3 long ass movies!
ha ha
5150reckless
05-03-2012, 05:04 PM
Does anyone run the Pampena FMIC? what are your thoughts?
FeaRpb
05-03-2012, 06:32 PM
Isn't the "Pampena FMIC" a CX Racing FMIC?
Chris@Rvengeperformance
05-03-2012, 06:33 PM
Isn't the "Pampena FMIC" a CX Racing FMIC?
yep
You are certainly going to prove Ray a mortal man. He'll be dead before you run 10s.
i3igpete
05-03-2012, 06:50 PM
unless he means the monster one ray runs on his own car with the gigantic endtanks.
Alex3000gt
05-03-2012, 07:07 PM
unless he means the monster one ray runs on his own car with the gigantic endtanks.
Gigantic end tanks aren't necessarily a good thing. In my experience you want a sloped design to prevent air from stagnating or swirling in the large cavity. You would need some CFD analysis software and a few different iterations of your tank design in CAD to find an optimal design.
Alex3000gt
05-05-2012, 01:14 AM
yep
You are certainly going to prove Ray a mortal man. He'll be dead before you run 10s.
^What he said. Clock is ticking.
Turbo Beast
05-05-2012, 11:22 AM
I can't believe this thread is still going :)
dpartinvr4
10-29-2013, 12:58 AM
......It's running...... Quest on LOL
CoopKill
10-29-2013, 11:37 AM
:lmao:
yep
You are certainly going to prove Ray a mortal man. He'll be dead before you run 10s.
ouch :Clap: :Bwahaha: sorry but that made me lol
Alex3000gt
10-29-2013, 02:46 PM
^What he said. Clock is ticking.
Clock is still ticking.
Tick, tock.
Didn't see a running car or 10s at the NG this year.
What gives?
Streamln1
10-31-2013, 01:54 AM
wow a lot of debate going on here lol.
Simple formula really, 13t with the right supporting mods and tuned right, prob a high 10 sec car possibly. Seems like around that 500 - 550 awhp range is your min for a shot at 10's, thats pushing the upper limits of td04 territory but it can and has been done. From that point its just a matter of driving it right and getting it to the ground effectively.
Problem is there are so many poorly done mods out there and people who just do not know what they are getting themselves into or just don't have the budget to do so. How many 10 sec car for $5k attempt threads have there been?
Uniuno
10-31-2013, 11:28 AM
I don't think Ray or Matt have ever made a hype thread and failed to deliver two years later.
I hate hype threads. I read this one hopeful that two years later after it had been started that something came of it and nothing, no dyno, no 1/4 time, nothing but a huge disappointment.
Props to Ray, Matt, STM, and everyone else that actually deliver. I'm going to go back and re-read Permanent Grin's thread..
kywhitelightning
10-31-2013, 12:11 PM
wow a lot of debate going on here lol.
Simple formula really, 13t with the right supporting mods and tuned right, prob a high 10 sec car possibly. Seems like around that 500 - 550 awhp range is your min for a shot at 10's, thats pushing the upper limits of td04 territory but it can and has been done. From that point its just a matter of driving it right and getting it to the ground effectively.
Problem is there are so many poorly done mods out there and people who just do not know what they are getting themselves into or just don't have the budget to do so. How many 10 sec car for $5k attempt threads have there been?
If it's such a simple formula why has NO ONE ever done it on 13T's? The highest dyno I remember on 13T's was right at 500 and that car I believe hasn't made it out of the 12's. The only way I ever expect to see a 13T car in the 10's is for it to be a shell of what used to be a 3S.
Jeff
NOMIEZVR4
10-31-2013, 11:19 PM
hype threads FTL...
Hard AttacK
10-31-2013, 11:33 PM
That's the shit i dont LIKE. how would you expect to launch your car thay hard?
Alex3000gt
10-31-2013, 11:52 PM
"You know, Edwin knows a few things."
http://goo.gl/w80xC0
Ray Pampena
11-01-2013, 01:27 PM
Soooo am I mortal?? I feel like I am because my back hurts and my job is stressful!
Alex3000gt
11-02-2013, 01:07 AM
https://scontent-a-ord.xx.fbcdn.net/hphotos-prn2/1393658_653569116800_2006240638_n.jpg
I found a picture of Dillon updating this thread.
Streamln1
11-02-2013, 04:35 AM
If it's such a simple formula why has NO ONE ever done it on 13T's? The highest dyno I remember on 13T's was right at 500 and that car I believe hasn't made it out of the 12's. The only way I ever expect to see a 13T car in the 10's is for it to be a shell of what used to be a 3S.
Jeff
Then they were a horrible driver or had other issues with the car. 500 awhp will get you well into the 11 sec range easily.
13t with the HL turbine wheel should be able to push past 500 awhp and it seems above 550 is where good driving is knocking on the door of 10's. If one was on a mission to make it happen there is a chance. There are a lot easier setups out there go reliably get into the 10 sec range, most people just don't spend the money, time or skill to do it right, thats why you only see a handfull of cars on that 10 sec list. The 13t is pretty close to a 15g in flow capabilites imo. I have had both btw and I probably did more 13t research than most. The point is the 13t turbo setup is geared more towards budget builds and not people who are serious about making big power and dropping big money, so how many people had a setup that was truely capable of testing the limits of a 13t?
sergechronos
11-02-2013, 12:32 PM
If it's such a simple formula why has NO ONE ever done it on 13T's? The highest dyno I remember on 13T's was right at 500 and that car I believe hasn't made it out of the 12's. The only way I ever expect to see a 13T car in the 10's is for it to be a shell of what used to be a 3S.
Jeff
Ray squeezed 515awhp out of someone's not too long ago. But regardless of hp, the times are subject to a LOT of variables. Track preparation, driver skill of course, whether or not the driveline had been braced up, type of tires, and weather would make a huge difference. I'm not saying that a 13T will definitely run 10s, but that doesn't mean it's impossible, you'd just need several factors just right.
As has been pointed out before, Ray and Chris manage to squeeze more time out of the same cars than their owners because they clearly are sacrificing bulls to Poseidon or something in exchange for the skill/fortune.
At 450-500awhp, should trap somewhere around 115-120, which would be around mid 11s with a good driver. If everything else goes your way, you have slicks on, drive train is braced and ready for it, you *may* be able to trim it down to low 11s at full weight and MAYBE (but unlikely) high 10s in a stripped out form. Mustgofaster on 3si ran an 11.4 at around 3300 pounds on 93 octane (http://www.3si.org/forum/f1/my-13t-track-times-467276/):
60' = 1.654
330 = 4.762
1/8 = 7.349 @ 96.46
1000' = 9.544
1/4 = 11.409 @ 120.07 MPH
Next run I got another 1.6 60' but biffed the 1-2 shift and aborted the pass.
So is anybody sure of the 13T record? I made all these passes on 93 octane pump gas as well, nothing else.
Setup:
WRX 13T's, custom 2.25" SS intake pipes. 20-21 PSI dropping to ~19.5 @7K
Ebay down pipe, gutted rear precat, stock cat back cut off next to the rear diff.
Custom FMIC with 24x12x4 Garret core and 2" hot piping, 2.5" cold. Tial 50mm BOV.
880cc injectors, AEM EMS, One Walbro 255, not hot wired. Stock rail loop and FPR.
Stock long block, ~130K on it, heads re-done 10K ago, NO PORT WORK
NA VICS manifold, switches at 3K, the short runners are slightly short than TT runners.
Southbend Rally (stage 1) clutch, stock FW
5 speed AWD trans with a Kormex front diff, NBT OS and a EK2 T-case brace.
245/45/17 Dunlop Direzza Z1 Star Specs @ 28/26 PSI.
Race weight: 3380lbs (with me), they had a scale.
It's not a street car, but it did make the 270 mile round trip to BIR on it's own power.
Perhaps given race gas/E85 and slicks, could cut it down a bit more. No port work to heads, no cams and no cam gears also leaves some power table. The VICS may also possibly hurt power up top. Not sure if he was still doing the factory MAF or had switched to blow thru or speed density (given he had an AEM), given power he would've been at the upper end of what the factory MAF would handle and might partially explain why he couldn't turn up the boost without it going leaner despite having enough injector and pump. Dynojet later in the thread put him at around 440hp and 460 tq.
Assuming that 100lb =.1 ET, would put it around 12 seconds at full weight. I think someone at NG a few years ago ran 11.6 with 13Ts, unsure of what mods or weight he had.
I would say theoretically 10s are within reach at the limit, but you'd need a lot more supporting mods/work and skill to make it happen. Just not really worth it honestly when you could get DRs that WILL get you there and probably with less expense.
kywhitelightning
11-02-2013, 02:08 PM
Then they were a horrible driver or had other issues with the car. 500 awhp will get you well into the 11 sec range easily.
13t with the HL turbine wheel should be able to push past 500 awhp and it seems above 550 is where good driving is knocking on the door of 10's. If one was on a mission to make it happen there is a chance. There are a lot easier setups out there go reliably get into the 10 sec range, most people just don't spend the money, time or skill to do it right, thats why you only see a handfull of cars on that 10 sec list. The 13t is pretty close to a 15g in flow capabilites imo. I have had both btw and I probably did more 13t research than most. The point is the 13t turbo setup is geared more towards budget builds and not people who are serious about making big power and dropping big money, so how many people had a setup that was truely capable of testing the limits of a 13t?
Not very many. There are only 2 that I'm aware of that broke 500 and they weren't much above it. While they seem to be a great turbo to use, they certainly haven't proven to be the ticket to 10's.
Ray squeezed 515awhp out of someone's not too long ago. But regardless of hp, the times are subject to a LOT of variables. Track preparation, driver skill of course, whether or not the driveline had been braced up, type of tires, and weather would make a huge difference. I'm not saying that a 13T will definitely run 10s, but that doesn't mean it's impossible, you'd just need several factors just right.
As has been pointed out before, Ray and Chris manage to squeeze more time out of the same cars than their owners because they clearly are sacrificing bulls to Poseidon or something in exchange for the skill/fortune.
At 450-500awhp, should trap somewhere around 115-120, which would be around mid 11s with a good driver. If everything else goes your way, you have slicks on, drive train is braced and ready for it, you *may* be able to trim it down to low 11s at full weight and MAYBE (but unlikely) high 10s in a stripped out form. Mustgofaster on 3si ran an 11.4 at around 3300 pounds on 93 octane (http://www.3si.org/forum/f1/my-13t-track-times-467276/):
Perhaps given race gas/E85 and slicks, could cut it down a bit more. No port work to heads, no cams and no cam gears also leaves some power table. The VICS may also possibly hurt power up top. Not sure if he was still doing the factory MAF or had switched to blow thru or speed density (given he had an AEM), given power he would've been at the upper end of what the factory MAF would handle and might partially explain why he couldn't turn up the boost without it going leaner despite having enough injector and pump. Dynojet later in the thread put him at around 440hp and 460 tq.
Assuming that 100lb =.1 ET, would put it around 12 seconds at full weight. I think someone at NG a few years ago ran 11.6 with 13Ts, unsure of what mods or weight he had.
I would say theoretically 10s are within reach at the limit, but you'd need a lot more supporting mods/work and skill to make it happen. Just not really worth it honestly when you could get DRs that WILL get you there and probably with less expense.
You can't tell me that 3380 WITH a driver is not a stripped down version of what a 3S is. I'll stick to my statement until someone proves me incorrect. I doubt that'll ever happen though.
The recent 515 dynoed car at Ray's shop has already expressed intrest in a larger set of turbos, hmm wonder why?
Jeff
sergechronos
11-02-2013, 02:45 PM
Not very many. There are only 2 that I'm aware of that broke 500 and they weren't much above it. While they seem to be a great turbo to use, they certainly haven't proven to be the ticket to 10's.
You can't tell me that 3380 WITH a driver is not a stripped down version of what a 3S is. I'll stick to my statement until someone proves me incorrect. I doubt that'll ever happen though.
The recent 515 dynoed car at Ray's shop has already expressed intrest in a larger set of turbos, hmm wonder why?
Jeff
Didn't argue that it wasn't stripped, I did address that though saying that the difference in ET from the weight would be close to 1/2 second of ET. I also said, and I quote:
would say theoretically 10s are within reach at the limit, but you'd need a lot more supporting mods/work and skill to make it happen. Just not really worth it honestly when you could get DRs that WILL get you there and probably with less expense.
And Thors already got a bigger set (DR800 IIRC.) My point is merely that a 10.9 would be theoretically possible at the absolute limit with the right driver, conditions and mods (since that was the original point of the thread.) Citing Ray's 11.2 with DR650s on a mostly stock car which had what, roughly 480awhp? Again, still better options out there for it, but theoretically 10s could be possible.
I agree completely though that were I chasing a 10s time slip, 13Ts would not be my choice to do it. By the time you total everything else that you need to do it, might as well have thrown down the extra 2k for a set of billet 750s and have more left to play with. 750s could do more through the stock exhaust and intercoolers (and intake aside from an Evo MAF) than the 13Ts would with FMIC, full exhaust, head work + cams, ARC2 or MAFT with appropriate MAF and pretty much every other bolt on you could throw at it. By the time you total all the other parts up, you could've paid for 750s and been ahead of the game.
Streamln1
11-03-2013, 02:51 PM
I suppose the point is, 13t is a budget turbo setup, its unlikely that anyone who drops big $$ into the rest of the drivetrain is going to choose that turbo, when there is more headroom available in other options.
I had the right setup to try it at one point, fmic, AEM, 13t's, 780cc, dr heads and headers, I never got a chance to really push them though, the tuner I paid to tune the AEM would up blowing my my engine, after that I ditched the 13t's and went td05.
dpartinvr4
11-09-2013, 01:11 PM
Looks like he's staying immortal, rear turbo gave up the ghost today :(.....it was a good run guys,now to save up for some billet 650's
dpartinvr4
12-03-2013, 01:40 AM
WARNING: this contains alot of me rambling........just saying
Well, it's been a long almost three years since this thread was started, putting this car back together has brought me to hate "three years ago Dillon"....fixing shitty wiring, fixing things I messed up trying to change, it's just been like WTF man, take some pride in your work, but this is the problem with having the car since high school, as you mature, in both knowledge, skill, and taste, you start to find things to fix and things appear that you have to fix. I believe the turbo blew from an incorrectly preloaded waste gate actuator. We'll never know if I could have ran 10.99x on the 13T's, but at this point I don't care, I still want a fast car, but having a street able monster that is not a "sleeper" because lets face it, these cars are way to sexy for that to happen, but a 5xx HP street car on pump gas seems like an achievable goal that will make for an insanely fast "in relation to most everything on the road", and "as much as a 3kgt can be" reliable sports car that will just be enjoyable to drive. for the 100 miles I got to drive the car before the turbo crapped out, it was a blast. I'm more than thrilled with the 3.1L Ray sent me, and being able to say I built the car from the block up personally gives me alot more pride than doing what my buddy did and "drop his "Pontiac" gto off at a shop and get it back with 480HP at the wheels, yeah it's easier, but the car hasn't had a problem yet that I haven't really been able to chase down in a matter of hours, from basically knowing how everything works together. I'm not trying to say I know as much as Chris Hill or Ray so save your flames, I just enjoy being able to diagnose and fix my own issues when they arise and I've become pretty good at it. as nice as it would be, I don't think I'll ever be done modding the car as I enjoy the building process more than driving it, which is hard to do...lol but I've noticed lately that while my friends seem to love HP and TQ numbers and how the car looks, I find myself fascinated with the technical aspects of the cars,...I suppose that stems from when we were little, while they would be playing with hot wheels cars, I would be building, breaking, and rebuilding LEGO contraptions. I have plenty in store for the car, and lots of DIY's that will hopefully turn out for the better. I want to thank all you guys in the community for being as helpful as you are being on a couple other forums, we are just a different kind of enthusiast that I haven't really seen anything like before. hope to see you all at NG14 thanks for sticking with me on this never ending adventure that is owning a 3/S
dpartinvr4
12-03-2013, 01:55 AM
ANYWHO: on to the new goodies :)
TD04-HL billet 11 blade extended tip 19T's with 9 blade turbine wheel and antisurge compressor hosuings. FORGED Billet adjustable wastegates 7psi springs untill the engine is broke in, then the big ones go in :)
31202_192621_572_zpsdb830594.jpg.html]http://i888.photobucket.com/albums/ac81/dpartinvr4/IMG_20131202_192621_572_zpsdb830594.jpg[/URL]
here's some pics of them next to the 13T compressor housings.
http://i888.photobucket.com/albums/ac81/dpartinvr4/IMG_20131202_230226_144_zpsc69d8e55.jpg (http://s888.photobucket.com/user/dpartinvr4/media/IMG_20131202_230226_144_zpsc69d8e55.jpg.html)
http://i888.photobucket.com/albums/ac81/dpartinvr4/IMG_20131202_230302_469_zpse720f6e4.jpg (http://s888.photobucket.com/user/dpartinvr4/media/IMG_20131202_230302_469_zpse720f6e4.jpg.html)http://i888.photobucket.com/albums/ac81/dpartinvr4/IMG_20131202_230336_747_zps07c33bf5.jpg (http://s888.photobucket.com/user/dpartinvr4/media/IMG_20131202_230336_747_zps07c33bf5.jpg.html)http://i888.photobucket.com/albums/ac81/dpartinvr4/IMG_20131202_230415_515_zps987f2d46.jpg (http://s888.photobucket.com/user/dpartinvr4/media/IMG_20131202_230415_515_zps987f2d46.jpg.html)
here's the turbine wheels profile
http://i888.photobucket.com/albums/ac81/dpartinvr4/IMG_20131202_230441_493_zpsa6b07fa3.jpg (http://s888.photobucket.com/user/dpartinvr4/media/IMG_20131202_230441_493_zpsa6b07fa3.jpg.html)http://i888.photobucket.com/albums/ac81/dpartinvr4/IMG_20131202_230448_502_zpsa8872c4f.jpg (http://s888.photobucket.com/user/dpartinvr4/media/IMG_20131202_230448_502_zpsa8872c4f.jpg.html)
lets see how this helps out with the surge
http://i888.photobucket.com/albums/ac81/dpartinvr4/IMG_20131202_230505_416_zps670d8e57.jpg (http://s888.photobucket.com/user/dpartinvr4/media/IMG_20131202_230505_416_zps670d8e57.jpg.html)
the big boys...for later down the road
http://i888.photobucket.com/albums/ac81/dpartinvr4/IMG_20131202_230526_117_zpsb9f29a35.jpg (http://s888.photobucket.com/user/dpartinvr4/media/IMG_20131202_230526_117_zpsb9f29a35.jpg.html)
Streamln1
12-03-2013, 03:18 AM
That's a badass turbo
NOMIEZVR4
12-03-2013, 08:53 AM
Looks like they will bolt up just fine...I should have gone down this route...:( Reason I didn't purchase them is because of rumors stating they aren't a bolt-on turbo...BTW I've got 13t comp housings myself and oil/coolant lines fit just fine. How much did they run you?
familyMAN
12-03-2013, 11:31 AM
Turbos look sweet. I hope they work well for you. If your goal is 500awhp on 100% pump gas (no meth), as stated in your above post, I would've gone with bigger turbos. Something like 16gs or DR800's. Much better chance of getting there without needing more octane.
dpartinvr4
12-03-2013, 11:49 AM
Turbos look sweet. I hope they work well for you. If your goal is 500awhp on 100% pump gas (no meth), as stated in your above post, I would've gone with bigger turbos. Something like 16gs or DR800's. Much better chance of getting there without needing more octane.
I wanted.The faster spool, if i don't hit it, ill either go meth, or say fuck it and go e85
Sent from my DROID RAZR using Tapatalk
green-lantern
12-03-2013, 01:02 PM
Nice turbos, Good luck!
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.