PDA

View Full Version : 1995 Yellow VR4 Billet GZP747 Build



Emilie@GZP
03-01-2011, 06:12 PM
We got this from car Hellbringer quite a few months back, after this whole to-do (long story). Drove down to NC and trailered it home. I think this was back in September...?? Maybe early October... something like that.

Anyway, it's been sitting in a corner ever since with a blown engine and blown turbos (which were a bit of a surprise, but, we weren't expecting a gem). We ran into some title issues, because the company that re-po'd the car, never actually applied for a title :rolleyes:

I have FINALLY been able to track down a company that can get a title for me :Clap: So... we began the tear down.

We knew it had a whole bunch of modifications:

3SX Executioners (we aren't 100% sure that's what they are)
Stillen DP
JIC EXhaust
Greddy Emanage Blue
Arc2
Granitelli (spelling??) MAS
Greddy E01 Boost Controller
RPS Clutch
680cc injectors
I believe a Walbro Fuel Pump.

So... we pulled the cylinder heads off... and lo-and-behold, forged pistons :laugh: That was a pleasant surprise for sure! We're pulling the guts apart to see what else is in there (maybe some forged rods?!) So, we'll be rebuilding this engine when time allows.

Pictures to follow as we progress with the tear down and rebuild :)

http://i34.photobucket.com/albums/d111/3Scar/95%20Yellow%20VR4/IMG_6154.jpg

http://i34.photobucket.com/albums/d111/3Scar/95%20Yellow%20VR4/IMG_6160.jpg

http://i34.photobucket.com/albums/d111/3Scar/95%20Yellow%20VR4/IMG_6159.jpg

mh3kgt
03-01-2011, 07:46 PM
Interested in selling the arc2 or possibly doing a trade for my Maftpro....kind of considering ditching my Speed Density setup and going back to Arc2 until I learn to tune better. PM me if we can work something out

Emilie@GZP
03-01-2011, 07:50 PM
We'll be putting the arc2 back in to the car with the new set-up. Nothing out of it is currently for sale.

YoshiBishi
03-01-2011, 08:35 PM
I would love to see what you guys end up doing with this car. I have almost the same parts on mine!

mb3000
03-01-2011, 09:07 PM
:D Been watching this car from day 1. Glad it ended up in good hands.

Emilie@GZP
03-01-2011, 09:12 PM
Yea, it ended up being a lot more work than we initially thought. Fortunately though, we were planning on doing a build... this just gave us an excuse to do a little BIGGER of a build... :suspect:

IPD
03-02-2011, 01:13 AM
even on the lift it has stock wheel gap. :D

Emilie@GZP
03-03-2011, 11:54 AM
Engine is starting to come together :)

http://i34.photobucket.com/albums/d111/3Scar/95%20Yellow%20VR4/IMG_6163.jpg

http://i34.photobucket.com/albums/d111/3Scar/95%20Yellow%20VR4/IMG_6164.jpg

http://i34.photobucket.com/albums/d111/3Scar/95%20Yellow%20VR4/IMG_6165.jpg

http://i34.photobucket.com/albums/d111/3Scar/95%20Yellow%20VR4/IMG_6180.jpg

http://i34.photobucket.com/albums/d111/3Scar/95%20Yellow%20VR4/IMG_6181.jpg

jba3
03-03-2011, 03:57 PM
Paint that red fuel rail loop. :D

Mmmm, yellow VR4....

PearlWhiteR/T
03-03-2011, 04:08 PM
I remember seeing this car long time ago on 3si for sale. Nice project choice though... For some reason I love the factory yellow. You just plan on rebuilding the executioners or what?

Emilie@GZP
03-03-2011, 04:29 PM
I remember seeing this car long time ago on 3si for sale. Nice project choice though... For some reason I love the factory yellow. You just plan on rebuilding the executioners or what?

Yea, it was a real nice car to start with :)

The day we brought it home (pit-stop at Hans' parents' house in NC
http://i34.photobucket.com/albums/d111/3Scar/95%20Yellow%20VR4/47222_493247759147_691634147_6956264_5485863_n.jpg


the executioners were tossed in the pile of junk turbos we have.

The car was repainted a few times, and is a mish-mosh of a few different shades of pearl yellow. So, we'll be repainting it the factory yellow when time allows and our back log of body work is cleared out.

We have some new td04 turbos that we'll be debuting on this car :)

Emilie@GZP
03-03-2011, 04:30 PM
Paint that red fuel rail loop. :D

Mmmm, yellow VR4....

yea, tell me about it :lol: I was annoyed they put the fuel rails on before I was allowed to repaint it. I may mask it off and just sand and paint it black for now. red on a yellow car is just "EWW" :lol:

IPD
03-04-2011, 07:48 AM
yea, tell me about it :lol: I was annoyed they put the fuel rails on before I was allowed to repaint it. I may mask it off and just sand and paint it black for now. red on a yellow car is just "EWW" :lol:


i tried telling jrod that once. :)

Stealthlabel
03-04-2011, 03:57 PM
glad to hear yall got the title situation figured out!! cant wait to see what is gona happen with it!!

Emilie@GZP
03-09-2011, 11:19 AM
We're retaining all of the stock heat shields... you know... for that sleeper look ;) I believe we are also going to run side mount intercoolers as well. No FMIC for this car... not yet at least. :)

http://i34.photobucket.com/albums/d111/3Scar/95%20Yellow%20VR4/IMG_6332.jpg

fullracegt
03-09-2011, 07:11 PM
nice looking motor so far

Emilie@GZP
03-10-2011, 04:13 PM
http://i34.photobucket.com/albums/d111/3Scar/95%20Yellow%20VR4/IMG_6338.jpg

http://i34.photobucket.com/albums/d111/3Scar/95%20Yellow%20VR4/IMG_6339.jpg

mh3kgt
03-10-2011, 04:31 PM
Woot! looks like it's getting close

Emilie@GZP
03-10-2011, 04:37 PM
some bling ;)

http://i34.photobucket.com/albums/d111/3Scar/95%20Yellow%20VR4/IMG_6344.jpg

3000vr4kyspyder
03-10-2011, 05:00 PM
That would look good on mine!!!!! :) Like that exhaust too....



some bling ;)

http://i34.photobucket.com/albums/d111/3Scar/95%20Yellow%20VR4/IMG_6344.jpg

Emilie@GZP
03-10-2011, 05:04 PM
We can do that :)

AdamVR4
03-15-2011, 03:08 PM
Great looking build. Love the retention of all the factory stuff (heat shields, covers, etc). Not the way I would have done it when I was 18, but 7 years later... Yeah. :)

Hans@GZP
03-15-2011, 03:14 PM
Yea, I have different themes for all of my 3/S's. Some are show/go... some are just go. This one is a bit of both, but more sleeper. It has a fully built engine in it (forged pistons, rods, crank, ported heads, 1mm oversided valves, dual valve springs, and ARP main and head studs), but I really wanted to keep it looking stock. There is a local single turbo supra that I really want to go after. He beat a wipple 03 cobra and is now "the king of the streets" around here with 700ish rwhp. I think he may have upgraded to an 88mm turbo by now, but I still want to take a crack at him in my "stock" vr4 :).

Nytron
03-15-2011, 03:46 PM
Yea, I have different themes for all of my 3/S's. Some are show/go... some are just go. This one is a bit of both, but more sleeper. It has a fully built engine in it (forged pistons, rods, crank, ported heads, 1mm oversided valves, dual valve springs, and ARP main and head studs), but I really wanted to keep it looking stock. There is a local single turbo supra that I really want to go after. He beat a wipple 03 cobra and is now "the king of the streets" around here with 700ish rwhp. I think he may have upgraded to an 88mm turbo by now, but I still want to take a crack at him in my "stock" vr4 :).
What kind of TD04 turbo do you plan on running? Anything short of a DR750 and he's gonna win that one. I suppose you could insist on racing from a dig :D. If I were you I'd do TD05 since the engine is obviously up to the task, then you could beat him from a roll too.

IPD
03-15-2011, 03:52 PM
you can race from a roll. 700whp supras aren't good for roll racing until it starts above 40mph. go for a 10mph roll and fuck his shit up.

Emilie@GZP
03-15-2011, 04:05 PM
What kind of TD04 turbo do you plan on running? Anything short of a DR750 and he's gonna win that one. I suppose you could insist on racing from a dig :D. If I were you I'd do TD05 since the engine is obviously up to the task, then you could beat him from a roll too.

We are running our new GZP 747 Billet turbos :) Neither Hans or I were a huge fan of the spool of the TD05's on a stock 3L engine.

http://www.3swarehouse.com/index.php?option=com_virtuemart&page=shop.product_details&flypage=flypage.tpl&product_id=569&Itemid=1

Nytron
03-15-2011, 04:11 PM
We are running our new GZP 747 Billet turbos :) Neither Hans or I were a huge fan of the spool of the TD05's on a stock 3L engine.

http://www.3swarehouse.com/index.php?option=com_virtuemart&page=shop.product_details&flypage=flypage.tpl&product_id=569&Itemid=1
Oh snap, verry niice. More TD04 billet options I see.

Looking forward to seeing if these beat out the DR650s.

Emilie@GZP
03-15-2011, 04:13 PM
We'll find out soon enough. The yellow VR4 should hopefully be ready for dyno within the week! :runaway:

PearlWhiteR/T
03-15-2011, 09:05 PM
^Definitely interested to see the kind of numbers this thing puts down:coo3l: Good to see more turbo options coming available.

Hans@GZP
03-15-2011, 11:48 PM
We'll see what it puts down with stock intercoolers first. Then I'll get some upgraded side mount intercoolers for it.

I'd rather go from a roll and preserve my trans. I don't know why, but I didn't put a bell housing brace in this one. I guess I was too anxious to get it running.

GTOJOE
03-16-2011, 01:09 AM
We'll see what it puts down with stock intercoolers first. Then I'll get some upgraded side mount intercoolers for it.

I'd rather go from a roll and preserve my trans. I don't know why, but I didn't put a bell housing brace in this one. I guess I was too anxious to get it running.

Details?

Hans@GZP
03-16-2011, 09:27 AM
No details yet. I've got one old cartech intercooler, can't find the other... and a set of HKS side mounts, but I'd hardly call them an upgrade. I may look into making a set.

Emilie@GZP
03-23-2011, 10:48 AM
Had an oil pressure problem with the engine (aka... no pressure). Found out what was wrong with it and we'll have the car running today (pending any more craziness). It's the first time we have ever seen a bad oil pump that was brand new.

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-snc6/200125_10150214189449148_691634147_8960135_2766721 _n.jpg

CoreyB
03-23-2011, 10:52 AM
Is one tooth supposed to be wider than the rest? Seems like that could of caused it. Cant remember but I dont see how it could work like that.

Stealthlabel
03-23-2011, 11:22 AM
no its not larger... just looks like it if u dont stare hard enough... that is crazy there are 3 very noticeable cracks on it WOW

CoreyB
03-23-2011, 11:54 AM
My eyes must be screwed because the tooth pointing to 1 o'clock appears clearly larger. Not saying it is, I just cant get around the illusion.

Emilie@GZP
03-23-2011, 12:18 PM
My eyes must be screwed because the tooth pointing to 1 o'clock appears clearly larger. Not saying it is, I just cant get around the illusion.

You're seeing the metal behind the tooth. From the angle of the picture, there isn't much distinction between the teeth and the metal behind it. It's an optical illusion.

Stealthlabel
03-23-2011, 12:22 PM
haha yea... look at the 9 o'clock and maybe that will help differentiate, u can see it starts to go down then back up lol.

j2k4
03-23-2011, 12:23 PM
What's the shaft look like?

CoreyB
03-23-2011, 12:29 PM
Trippy

mh3kgt
03-23-2011, 12:38 PM
How are your bearings?

ViperZ
03-23-2011, 01:02 PM
I had that happen to a brand new oem oil pump a couple years back, failed on the first startup for no reason, it was primed and properly intalled. Destroyed my bearings/crank :(

Nytron
03-23-2011, 01:30 PM
Was that a gates or oem oil pump that failed?

IPD
03-23-2011, 01:33 PM
Was that a gates or oem oil pump that failed?

in for this as well. i've got a gates one coming for my new build. can't afford a failure on a new pump.

Emilie@GZP
03-23-2011, 01:36 PM
It's an oem oil pump.

Ray Pampena
03-23-2011, 04:14 PM
this is my first time seeing this thread so i know its a little late... those are high compression pistons in there.. like the 10:1 pistons. also, pack the oil pump with assembly lube or else it wont pull a prime and it can bind up and break.

Emilie@GZP
03-23-2011, 04:34 PM
Yea, Ross pistons I think is what we figured out. We didn't reuse those for this block.

Hans said he's never packed one before in his life, and he has never had one break. He just puts oil in it.

jba3
03-23-2011, 10:30 PM
Yea, Ross pistons I think is what we figured out. We didn't reuse those for this block.

Hans said he's never packed one before in his life, and he has never had one break before this one. He just puts oil in it.

Fixed? ;)

In for dyno results. The build has gone quickly, good luck with the final bits to get it on the dyno.

Hans@GZP
03-24-2011, 10:07 AM
I'll be working on the car more next week. I have a new oil pump coming in today, so I'll be installing that and checking the main bearings. The rods were fine when we had dropped the pan to throw on another oil pump.

It is running now, but I'm paranoid and we're just going to triple check everything.

Emilie@GZP
06-19-2011, 07:01 PM
FINALLY got all of the major issues worked out, new oil pump in. Hans is JUST finishing breaking in the engine... he's swapping out a knock sensor now, and then we're on to power pulls! :runaway:

http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/253917_10150338990043266_724288265_10250810_119263 4_n.jpg

CoopKill
06-19-2011, 07:24 PM
Hmmm, I spy non oem side mounts in there. What did you guys end up going with?

It's been over twenty minutes since your last post, numbers yet? lol

terrets
06-19-2011, 07:33 PM
You guys build airplanes?! How much? :p

Anyways nice looking car. I love that color yellow sooooooooooo much. Got a video camera? :)

Emilie@GZP
06-19-2011, 07:35 PM
Hmmm, I spy non oem side mounts in there. What did you guys end up going with?

It's been over twenty minutes since your last post, numbers yet? lol

They are our prototype GZP SMIC's. We'll be testing them all week at NG, then sending them out for production sometime after we get back ;)

Emilie@GZP
06-19-2011, 07:37 PM
No numbers yet... while Hans was changing the knock sensor... he leaned on the cam gear and one of the cams jumped time :awesome:

So... he's resetting those now, and I think he'll be adjusting the cam gears while he's fiddling around in there.

It's going to be a late night... He is DETERMINED to get some solid numbers TONIGHT!! Because we have an alignment scheduled for the car tomorrow morning :lol:

Emilie@GZP
06-19-2011, 07:51 PM
Close up of the smic's. We have the stock shrouds just zip tied on. I believe Hans will be adding brackets that will allow you to bolt up the stock shrouds.
http://i34.photobucket.com/albums/d111/3Scar/IMAG0216.jpg

http://i34.photobucket.com/albums/d111/3Scar/IMAG0217.jpg

Greg E
06-19-2011, 08:49 PM
In for results!

Emilie@GZP
06-19-2011, 08:57 PM
Just finished a quick pizza dinner, setting the timing belt, and we will be back in business shortly!!

Amphiron
06-19-2011, 10:17 PM
update update update update

Emilie@GZP
06-19-2011, 10:40 PM
Just fired the car back up....doing some warm up runs now, making sure everything is good.

Toni
06-19-2011, 10:41 PM
sweet!

Emilie@GZP
06-19-2011, 10:58 PM
http://www.youtube.com/watch?v=B3te3NmYRbQ&feature=youtube_gdata_player

Amphiron
06-19-2011, 11:11 PM
headlight buckets make such a good place to keep your tools :P

Hans@GZP
06-19-2011, 11:14 PM
I only have 20 miles on the engine. Probably need another 80 miles or so before power pulls. Feels real strong at 7 psi.

IPD
06-19-2011, 11:33 PM
yellow, blue and red engine bay. reminds me of jrod's car...

Emilie@GZP
06-19-2011, 11:39 PM
yellow, blue and red engine bay. reminds me of jrod's car...

It's just what we had laying around as far as couplers and such. after we send the SMIC kit out for production, we'll have black piping, black couplers, etc.

Hans@GZP
06-19-2011, 11:43 PM
with the boost controller off it made 341 awhp and 293 torque. Ran 7 psi and creeped to 10 psi at redline. Would have made more torque if the boost controller were set to 10 psi.

Emilie@GZP
06-19-2011, 11:50 PM
http://www.youtube.com/watch?v=eMNivdzLiFM

PearlWhiteR/T
06-20-2011, 01:04 AM
Looking pretty swolley for only 7psi. Can't wait to see the big psi numbers! What kind of power numbers do you guys think your side mounts could handle?

Emilie@GZP
06-20-2011, 09:00 AM
They should handle whatever we put through them.

Ninja Performance
06-20-2011, 09:10 AM
I only have 20 miles on the engine. Probably need another 80 miles or so before power pulls. Feels real strong at 7 psi.

Only takes 9-12 pulls done correctly to break it in. Only a few miles. Then hammer on it.

-Chris

GTOJOE
06-20-2011, 09:20 AM
I wanna see a 25PSI run or your banned :p

J. Fast
06-20-2011, 10:17 AM
Only takes 9-12 pulls done correctly to break it in. Only a few miles. Then hammer on it.

-Chris

+1 on hard break-in :DevilSmile:. Looking forward to hearing about the numbers in the next few days. Good luck Hans and Em.

Emilie@GZP
06-20-2011, 10:39 AM
Only takes 9-12 pulls done correctly to break it in. Only a few miles. Then hammer on it.

-Chris

We decided to err on the side of caution and take some time to break it in. :) We didn't put 100 miles on it though, maybe closer to 30 or so??

Emilie@GZP
06-20-2011, 10:39 AM
I wanna see a 25PSI run or your banned :p

I'm going to try to head to one of our parts suppliers and pick up a meth injection kit this afternoon...

3000vr4kyspyder
06-20-2011, 11:06 AM
Get a kit for me to sugar pie!

3000vr4kyspyder
06-20-2011, 11:14 AM
Buy a bunch of swim noodles too....we may need to strap them to the sides of the cars and push them around the flooded tracks. There is area wide flooding alerts again today and severe thuderstorms all day today- wed! :(


I do want my meth!!!!!

Hans@GZP
06-20-2011, 12:01 PM
Text Em if you want that meth kit.

I found a crack in my front valve cover. At first I thought I was getting severe blow by, but apparently not. Thank god. Swapping valve cover in a bit and then doing some pulls at 12 psi. I still have to hot wire this fuel pump.

J. Fast
06-20-2011, 12:56 PM
Nice catch Hans. Lot's of little bugs in this build. Hope that's the last one X(fingers).

Hans@GZP
06-20-2011, 01:12 PM
Well, still squirting oil out of the front valve cover area. Made 380 at 12-13 psi so far.

futurevr4man
06-20-2011, 01:51 PM
those turbos seem to be making some good numbers! im curious what around 20 psi will do :)

Emilie@GZP
06-20-2011, 02:04 PM
on my way to pick up a meth injection kit.... we'll see what it can do later tonight! :runaway:

NOMIEZVR4
06-20-2011, 03:50 PM
Hey off topic but I'm about to start my engine after a complete rebuild. I saw the pics of the shattered gears on the earlier pages..I didn't pack the oilpump with assembly lube, all I've done is just pour oil into the pan and into the filter. Are there any other precautionary steps I can take to avoid any catastrophic failures when cranking the engine for the initial oil pressure build up?

I've already disconnected the fuel supply so the cylinders don't get saturated with fuel.

Hans@GZP
06-20-2011, 06:44 PM
You should be ok. That's always how I've done it. Just crank for 30 seconds at a time and check to see if you have oil pressure. The stock gauge should move a tick or 2.

Ninja Performance
06-20-2011, 07:07 PM
Hey off topic but I'm about to start my engine after a complete rebuild. I saw the pics of the shattered gears on the earlier pages..I didn't pack the oilpump with assembly lube, all I've done is just pour oil into the pan and into the filter. Are there any other precautionary steps I can take to avoid any catastrophic failures when cranking the engine for the initial oil pressure build up?

I've already disconnected the fuel supply so the cylinders don't get saturated with fuel.

It's always best to pack with assembly lube while building, rotate pump until it pumps out. You will have oil up in the heads within seconds instead of 30+ seconds on the first starter turn over.

-Chris

Hans@GZP
06-20-2011, 07:14 PM
I always get oil to the heads within seconds of cranking and I just pour some oil in the pump before installing.

NOMIEZVR4
06-20-2011, 08:51 PM
Since everything is assembled and in the car, is there anything I can do now?

Emilie@GZP
06-20-2011, 08:55 PM
I am the FREAKING CHAMPION!!!! I found the oil leak, and I got to drive the VR4 on the dyno. I've never driven on the dyno before... that was SOO FUN!! :lol:

IPD
06-20-2011, 09:18 PM
I am the FREAKING CHAMPION!!!! I found the oil leak, and I got to drive the VR4 on the dyno. I've never driven on the dyno before... that was SOO FUN!! :lol:

i highly suggest randomly jerking the steering wheel left or right while you're above 5,000 rpms in 3rd gear or higher. it's a breathtaking experience.

Emilie@GZP
06-20-2011, 09:54 PM
bring your car up, we'll strap it to the dyno, and I'll yank it at 7k.

HellBringer
06-20-2011, 10:03 PM
I'll yank it



:hahainternet:




Just found this thread - had no idea it was here all this time..! That car has come a long way! Can't wait to see how this car does on the track!

Emilie@GZP
06-20-2011, 10:11 PM
:hahainternet:




Just found this thread - had no idea it was here all this time..! That car has come a long way! Can't wait to see how this car does on the track!

You and me both! :runaway: Hans is installing the meth injection kit now, then I need to go get some more gas... and we're TURNING UP THE BOOST!!! :peelout:

familyMAN
06-20-2011, 10:25 PM
I am the FREAKING CHAMPION!!!! I found the oil leak, and I got to drive the VR4 on the dyno. I've never driven on the dyno before... that was SOO FUN!! :lol:

:Clap:.......so, where is the dyno results?:D

Emilie@GZP
06-20-2011, 10:34 PM
Hans wanted me to do a pull so he could find where the oil was gushing from. I had told him it was the bolt hole for the timing belt cover, he didn't believe me. So I did a few pulls, and sure as shit, it was gushing from the bolt hole for the timing belt cover.

Amphiron
06-20-2011, 11:30 PM
How does that even happen? I've ran my car with no bolts in there I have no leaks from that spot.

Emilie@GZP
06-20-2011, 11:47 PM
the second valve cover seems to be cracked as well. we shoved a bolt in it, and it stopped gushing oil. :dontknow:

Go figure, 2 valve covers in a row, both with cracks in the same general area (timing belt side). And we've NEVER had a cracked valve cover before... so freaking weird :lol:

jbuhrman
06-21-2011, 12:22 AM
Meth results??

terrets
06-21-2011, 04:35 AM
Since everything is assembled and in the car, is there anything I can do now?

You could grab a new grease gun and pump oil into one of the ports..Sending it through all the oil galleries and some into the pump...Itd be like priming it without turning it over :D...Im going to do it once I get my oil cooler fittings and whatnot.


Waiting on meth pulls :D and quit tightening your valve cover bolts so tight! :p

Hans@GZP
06-21-2011, 07:32 AM
Meth results??

Had to call it a night. I can't dyno past 11pm or usually the people that live nearby will call the cops. The back of my garage faces a huge hill which makes the sound echo like crazy. I have friends that live a mile away that can tell when I'm on the dyno lol.

i3igpete
06-21-2011, 10:07 AM
the second valve cover seems to be cracked as well. we shoved a bolt in it, and it stopped gushing oil. :dontknow:

Go figure, 2 valve covers in a row, both with cracks in the same general area (timing belt side). And we've NEVER had a cracked valve cover before... so freaking weird :lol:

that happened to me too. oil all over the timing belt. and then it jumped timing. :sad:

Emilie@GZP
06-21-2011, 10:11 AM
that happened to me too. oil all over the timing belt. and then it jumped timing. :sad:

OMG don't even SAY THAT!! Hans WILL kill someone if that happens.... :runaway:

i3igpete
06-21-2011, 10:16 AM
i was looking ALL over, i thought it was coming from the oil cooler lines or the filter housing. the dumbest part is that it wouldn't leak by just revving, you would have to floor it to build some crankcase pressure to make it leak.

Emilie@GZP
06-21-2011, 10:22 AM
i was looking ALL over, i thought it was coming from the oil cooler lines or the filter housing. the dumbest part is that it wouldn't leak by just revving, you would have to floor it to build some crankcase pressure to make it leak.

Same with our's. You would really have to get into higher boost for it to start squirting. Then it hits the cam gears and flings all over the place. Our whole car is covered in oil splatter :lol:

We never would have found the leak if it weren't on the dyno.

NOMIEZVR4
06-21-2011, 10:47 AM
You could grab a new grease gun and pump oil into one of the ports..Sending it through all the oil galleries and some into the pump...Itd be like priming it without turning it over :D...Im going to do it once I get my oil cooler fittings and whatnot.


Waiting on meth pulls :D and quit tightening your valve cover bolts so tight! :p

Very much appreciated. I have a fluid transfer pump which I will use to pump oil through the oil cooler lines.

vr3.9
06-21-2011, 11:45 AM
Just found this thread and read the whole thing. I feel like I just went out on a date with a hot chick. Expensive steak dinner, George de latoure wine and not even a good night kiss.

:(

Are we going to have to wait till after the NG to get some results.

Emilie@GZP
06-21-2011, 12:18 PM
SERIOUS rust in the gas tank... he's swapping that out now. :lol:

We'll have numbers shortly... everything is just about ready to go....

Hans@GZP
06-21-2011, 12:19 PM
Possibly lol. Just pulled the fuel pump to make sure an upgraded one was in there and found a tank full of rust and sediment. Luckily it was all hard and on the bottom, so I didn't pump any of that crap. Now I'm changing the tank. Should be back turning the rollers just after lunch.

Jimvr4
06-21-2011, 03:10 PM
Same with our's. You would really have to get into higher boost for it to start squirting. Then it hits the cam gears and flings all over the place. Our whole car is covered in oil splatter :lol:

We never would have found the leak if it weren't on the dyno.

Someone put in bolts that were too long and kept cranking them down because the timing cover was loose? :suspect:

CoopKill
06-21-2011, 09:24 PM
(Clears throat) Um, it is after lunch! lol

You did tighten the lug nuts, yes? :lmao:

CoopKill
06-21-2011, 09:25 PM
:suspect:

Emilie@GZP
06-21-2011, 10:01 PM
He's playing around now... I think he eeked around 27psi... at like 3500rpms :lmao:

This thing is freaking nuts. He yelled at me about posting updates... he doesn't like "feeling under pressure to perform" :lol:

He absolutely HATES the Greddy E01 boost controller. He wants to punch it. So... he's messing around with that still.

IPD
06-21-2011, 10:09 PM
should have gone with a hallman.

GTOJOE
06-21-2011, 10:10 PM
He's playing around now... I think he eeked around 27psi... at like 3500rpms :lmao:

This thing is freaking nuts. He yelled at me about posting updates... he doesn't like "feeling under pressure to perform" :lol:

He absolutely HATES the Greddy E01 boost controller. He wants to punch it. So... he's messing around with that still.

Just tell him to hurry the fuck up already :p

Emilie@GZP
06-21-2011, 10:17 PM
should have gone with a hallman.

The greddy e01 came with the car, along with the arc2. We were going to just use them, and see how it goes. but this e01 is being a hooker. He's actually installing a hallman boost controller now. We'll most likely be swapping over to a MAFT after the NG.

Emilie@GZP
06-21-2011, 10:17 PM
Just tell him to hurry the fuck up already :p

LOL He's trying. It's hot as HELL outside, so, that's really not helping, since we have to wait so long in between a set of pulls. :(

Emilie@GZP
06-21-2011, 10:19 PM
Manual Boost Controller installed... stupid boosting problem FIXED!! :Dancing:

IPD
06-21-2011, 10:52 PM
i called it. that does it, i'm NEVER using an EBC. ever.

Emilie@GZP
06-21-2011, 11:17 PM
we have great success with a number of other boost controllers, just with the addition of the meth, and Hans having never used it before... it's not worth the time for us to figure it out now.

familyMAN
06-22-2011, 12:09 AM
we have great success with a number of other boost controllers, just with the addition of the meth, and Hans having never used it before... it's not worth the time for us to figure it out now.
:musik2: ...jk

Where's the dyno results:DevilSmile::DevilSmile:

Hans@GZP
06-22-2011, 12:46 AM
It is only holding 17 psi at redline. I need to figure out why. It will spike to 20 and then drop down to 17. It makes 450 at the upper rpms where it is boosting around 17-18 psi. I gave up after that. I'll mess with it mire at the NG.

mb3000
07-25-2011, 02:05 AM
No update since the 21'st? :Seriously:

Hans@GZP
07-25-2011, 05:35 AM
We've been too busy building customer cars. We are building a couple more 747 cars right now, so we'll have more numbers in the next few weeks. My personal cars always come second to customers.

mb3000
07-25-2011, 02:28 PM
More data = better data. Thanks for the update Hans!