View Full Version : new clutch and now my car wont start`
dfoster101
03-01-2011, 03:12 AM
well i picked up a 93 VR4 about 3 weeks ago.. had a bad throw out bearing clutch and shifting fork. been in the shop for 2 weeks now (alot of that time was waiting on parts) they finally get it in today. But now when they go to start it it keeps popping the ecu fuse... wtf could be wrong? also i guess the rear drivers side wheel bearing is bad .. how hard is it to change? if anyone knows of a write up id appreciate it a ton if you could point me in the right direction. god im sooo over waiting to drive this thing!!! ive wanted a VR4 for sooo long its not even funny!! than,,, ill post pics of it if i ever get it running right .. one other thing why in the heck would someone cut the wires to the o2 sensor ? this some sorta mod? or just someone was a complete tool/idiot that had it before me ? it has a straight 3in exhuast no precat or cats ...
colt45 gto
03-01-2011, 06:08 AM
sounds like they trapped the wiring lume in the bell housing.
TwIzTeD_3kGt
03-01-2011, 10:36 AM
Some people unplug the 02's to keep the ECU in open loop for tuning. Not sure why someone would cut it though.
Valhallaz
03-01-2011, 11:21 AM
sounds like they trapped the wiring lume in the bell housing.
This, exactly.
Look for wires trapped between the bell housing and the block, your problem lies there.
dfoster101
03-01-2011, 11:50 AM
ok ill let em know to look for that then .. sounds pretty logical... thanks for the replies
green-lantern
03-01-2011, 11:52 AM
Definitely some kind of short. Check the hot wire to the starter and the one that trips the starter. I think I blew that fuse once when I forgot to unplug the battery and grounded it when trying to remove the starter. Also check your grounds. There should be one on the plenum also. Bad things can happen when the grounds are off.
dfoster101
03-01-2011, 11:04 PM
well i passed the advice to the shop n so hopefully theyll have it figured out by a decent time tomorrow... im s sick of waiting for my car to be done.. havent even gotten to drive it let alone really make my self at home in it lol, be differnt if they were working on a car id already been driven but i just bought it and dying to get a feel for it.. oh well long as it gets back to me all fixed and ready to go ill be happy even happier if it turns out to be a solid keeper ;} so anyone have or know of any write ups on dong the rear wheel hub assembly? trying to figure out if ill be able to do it myself or if ill need to take it to a shop. if the hub assembly just bolts onto the knuckle like the fronts do ill have no problems with it.. oh well everyone wish me luck on gettin my car back tomorrow lol
dfoster101
03-18-2011, 06:31 AM
Well im still having problems with my car, they found a bunch of wires that got caught/pinched between the bell housing and the block. The group of wires im talking about that he pinched/broke is the section of wires that splits off to the left from the main loom over the transmission.
So they butt connected them together and the car ran for awhile but now im blowing the engine fuse under the dash, i could move and wiggle the loom and the car would start run for a min but then blow the engine/motor fuse under the dash, but most the time i would just end up blowing the engine fuse cranks over fine though. just no start. So i then had it towed back to the shop and he says he went through all the wires that he broke in the bell houseing pinch ordeal and hard wired them without butt connectors this time but now hes not getting any spark. what the hell is in that section of wires that could be blowing my motor/engine fuse?
heres the full out history of whats been happening
bought car with bad transmission, started it around a doz. times. Had to jump it cause it had a bad battery but no problems jumping it or starting it. After jumping it i could turn off the key and restart it so the alt was working but the battery just not holding a charge very long maybe for a few hours to most the day. and even drove it to the shop a mile from my house..
I get it to shop they finsh the tranny work but pinched wires and it would blow the eci fuse under the dash everytime they turned key. found pinched wires (section of the looom that splits to the left from the main loom) fixed with butt connectors got it to run but now alt isnt charging battery so i have a friend bring me one from his car and we install it. he claims up n down its good but when we test it at autozone it comes up weak or bad also changed that bad battery. it seemed to be charging back so i chalk it up to autozone got a bad reading or whatever so we take off as its running... i drive around a little about 30 miles til the battery dies on me and tow it home.
next day he says bring the car over and he'll drop in another alt. he took off of his stealth so i swap a charged battery in form another car and it starts no problems and drive it to his house and install the alt. he took from his stealth. but now we cant get it started but once and it ran very briefly. he says he'll get it goin and bring it by the next day. well calls and says it still wont start he went through all his work and says its all looking right far as his alt. install work but still wont start and hell have it towed over to my house. then 10 mins later calls n says he got it running just turned the key and it finally started. and is on his way with it to my house. then 10 mins later calls and says it died on him and wont start again.. The next day i go over to where it died and take a friend with me. We jiggle the wires and it starts once, but only runs for a min, then it keeps popping engine/motor fuses and wont start again so back to the shop with it again.
They take and hard wire all the wires they narfed up no more butt connectors, but now no spark, no clue if it still blows the engine motor fuses now tho only said now its jsut not getting any spark. it may or may not be blowing fuses hes not tellin me anything more than that. WHAT THE HELL COULD BE BLOWING MY MOTOR/ENGINE FUSES???
colt45 gto
03-18-2011, 06:45 AM
sounds like he missed one or he cross wired one, i would go look at all the wires he reconnected and make sure every single color wire matches.
dfoster101
03-18-2011, 10:07 AM
just curious what all does that section of wires control ? on a side note why is this thread not apearing in the new posts section? did i do something wrong on how i started it ? can i fix it ?
dfoster101
03-19-2011, 01:50 AM
well just got back a bit ago from the shop and he says now that he fixed the wires he messed up by taking off the butt connectors and hard wired them with solder that the fuses arent poping but still no spark ... still waiting on the ignition coils should be in tomorrow though ... ; /
dfoster101
03-19-2011, 11:08 PM
any one???
Hans@GZP
03-20-2011, 10:03 AM
With the O2 sensors cut, they could ground out and pop the fuse. The wires he screwed up are for idle air control and your speedometer. If he's not getting spark, it's not going to be the coils. It could be the crank or cam angle sensor or the PTU. He needs to check the blue wire coming out of each of the cam and crank angle sensors for a pulsing 5 volt signal while someone is cranking the engine.
dfoster101
03-20-2011, 05:53 PM
so whats it take to change the cas on a 93 vr4? i heard you have to take off the timing belt and all that to get to it ... man i hope not be like a gran to do that as i might as well do the 60k tune up long as im in there. that would suck ;( .. btw when i say cut the O2 i mean its disconnected but the wires coming off of the sensor are cut but the section that you plug into is uncut if that makes sense to you. and its only the rear O2, but thanks for the info ill pass it to him tomorrow... gawd i just wanna drive this thing already lol btw i really appreciate the help.
dfoster101
03-21-2011, 05:45 PM
alright finally after 2 weeks my ignition coils are in !!! so now they can get back into figureing out what the hell is wrong with my car, i know hanz said it wouldnt be the coils but he didnt wanna do anymore work on it, testing other things til he had the coils ruled out, as he really thinks thats a strong possibility on whats wrong with it, so if its not ill clue him in on testing the other stuff hanz said "ptu cam and crank angle sensor" im hoping it be the cam or ptu sensor if anything as this be the cheapest fix outta those possibilities. one thing i was thinking was the ecu could this possibly be the problem ?
Valhallaz
03-21-2011, 06:40 PM
I'm not a bit impressed with your mechanic. He doesn't want to test anything else till you buy new coils which you may or may not need?
Replacing parts untill it runs is going to be an expensive thing. Especially since I'm thinking the problem is still in the wiring (if it ran when you took it to the him for a clutch), and your mechanic is too much of a dumbass to find it.
If I were you, I'd find a competent mechanic.
dfoster101
03-21-2011, 07:22 PM
no if its not the coils i wont be billed for them. Hes goin to return them i already asked about that
EthanS
03-21-2011, 10:52 PM
no if its not the coils i wont be billed for them. Hes goin to return them i already asked about that
Jeez Danny where the hell is this car now? So I can tell everyone I know to stay away from this mechanic. If he got the coils from us at autozone we won't be returning them lol. It's almost gotta be something in the wiring. He didnt fubar one of the wires going from the batt to the alternator did he? I don't know for sure on these cars, but on most cars the coils wont fire if it has a bad connection for the alternator. Which would explain your previous alt and batt problems...
If I'm not super busy this week I will try and look at it bud.
dfoster101
03-21-2011, 11:20 PM
lol im starting to not even want this car anymore lol and ive put all of 30miles on it. and its a shame cause thr body is sooo clean theres hardly any dings in it and the car fax shows it was well maintained and all that (called and they said they should be able take em back long as its something that they can sell in the original package then it should be fine)
dfoster101
03-23-2011, 02:12 AM
well i just got back from the shop and he hasnt had time to work on it yet , but im sure he must know what hes doin cause i asked about testing the cam and crank angle sensors and he said same thing Hans said to do which was check for a pulsing 5 volt signal coming from the blue wire on the cam and crank angle sensors. i dunno i guess i just have to let him have his time at it.
but like Valhallaz says "if it ran when you took it to the him for a clutch......." so i do think/suspect it is something to do with the wiring he messed up from pinching those wires between the bell housing and block, when he put the tranny back in.
How odd would it be that i just happen to have a sensor give out on me right after i left the shop, he says well "if its the wireing i did i fixed that cause i went back through and redid them and then made sure it was all done right".
could he of fried anything by pinching those wires ? alternator sensors ,,, anything?
but then again if its true what ethan says about the alternator not having a good connection it can cause problems. and i had some one else put that that i found had one on craigslist (not the shop) maybe thats problem? i dunno just hope he gets to working on it tomorrow lol...
J_Parker
03-23-2011, 03:50 AM
I think you need to find yourself a more competent mechanic as well, he doesn't seem to give a damn about your car, or the problems he had cause. If I had pinched someone's wiring harness between the block and bell housing, that would be the day I stop working on cars. He should be working on that thing 24/7 fixing HIS fuckup. Have him check EVERY ground and plug on the right side of the harness, make sure none of the pins have been dislodged from the snaps, and make sure none of them have been pinched as well. one of them could've just been slightly nipped when he mated the trans a block back together.
shmoo
03-23-2011, 05:50 AM
all sounds a bit irresponsible of your mechanic to me, but i don't know the circumstances really..
i'd get out the door for as cheap as your could. then see what you can fix yourself.. then see what you can have a friend/3s owner help you with, then mechanic.
you probably could have replaced your throw out bearing, was it? yourself. it's a nice skill to have. i think it'll make you appreciate shifting nicely a little bit more. and it's really not that hard.
you gotta jack and socket set?
_isiah
TwIzTeD_3kGt
03-23-2011, 12:52 PM
Simple solution. New wiring harness. He fucked up and hacked yours to shit, which caused all of your issues. I would scream lawsuit until I got a new harness or until a lawsuit came about. Most shops won't let it go that far before they do the right thing.
dfoster101
03-25-2011, 06:37 PM
well finallyyyy!! my car is fixed ... and it wasnt any of the things that ppl posted in here. was a short in the fuse box they fixed that and now its running fine .... mannn ! so i still have faith in my mechanic. ;) ohhh happy days are here again lol ,, anyone wanna buy it lol
dfoster101
03-26-2011, 12:00 AM
to amend the previous post, when i went to pick it up, it ran for a min .. went to pick it up and it idled fine and all that let it run for about 10 or so minutes or so to charge the battery a little it idled fine and all that , so i took off, then shortly after leaving the shops lot it just died then down the road about 200 yards. It just sorta fell on its face as i gave it very moderate gas then sputtered out n died, and we couldnt get it startedf again with a jumper pack so pulled it back to the shop. Seemed like it died just as a slight little boost started to build up like 2500 rpms maybe, so i might be taking it to a shop and having them fix it and get some money back form the shop im currently dealing with. on a side note the shop said they had it running for awhile and even took it out for a spin and it ran fine. had them check the alternator and said its puttin out 14v but why wasnt my battery more charged up if they had it running for any fair amount of time. so im thinking that they didnt have it running for too long....
J_Parker
03-26-2011, 12:28 AM
Obviously not, I'm thinking they go it running, shut it off and left the problem to you. A lot of mechanical company's will do that.
dfoster101
03-29-2011, 04:42 AM
well how about an update to my wireing deliemma lol ... i just got the car back earlier this afternoon and its wiring problems are solved once and for all i put a 125 - 150 miles on it and ran great ... dont get me wrong theres still some stuff to be squared up on the car, like its in need of a full tune up badly, but its running relatively well, tomorrow im pullin the plugs and some other stuff and seeing what sorta shape its all in... but its sittin in front of my house as we speak im soooo friggen happy finally got the car back and driving it after buying it a month n a half ago lol anyways ill post as i know more tomorrow n let anyone that might care to know how its goin n thanks a ton for everyone that chimmed in with knowledge trying to help me get this car straightened out i truely appreciate it ;) nice to belong to a group that really cares about its fellow man so to speak.
BTW the reason it died on me friday night was cause the wire he used to bypass the short in the fuse box for the engine fuse, came disconnected. also virtually non of the intake stuff was hooked up MAJOR boost leaks so no wonder it feel on its face soon as i gave it any sorta gas when i was taking off ... heh the Y pipe wasnt connected to the throttle body the blow off valve hose on the Ypipe was lose the 2 hoses coming off the maf was loose and there was another one that im not sure what it was but was totally not connected lmfao wow ... his excuse it was like that when it was brought in, i said well ya had to go through there to fix the wires on the loom you pinched so why didnt ya hook em back up afer ya were done in that area but anyways its running and its stable now to start tuning it up and gettin it running real good ;) im so happy this got resolved and this will not be my main shop anymore.. he took too long cared too little and alot of his work left alot to be desired !! hence overlooking or not careing about hook up my turbo plumbing correctly or at all for that matter, i SHOULD NOT of had to do that shit myself. and some other stuff but that one takes the perverbial cake heh. one thing in his defense tho ... he did seem to get the tranny rebuild feels solid and shifts smooth and the clutch feels good and all that it was the rest of the job he wasnt so hot on, also he was the one that did my stealths frot main seal and pulled that off without a hitch and in a very timely manor along with my 2 front wheel bearings as well. but anyways ill shut up now lol n thanks again for the input
shmoo
04-05-2011, 03:09 AM
well congrats on getting her back on the road.
but really. you should just work on her yourself. removing your transmission for example is not difficult. it's just a little time consuming. all the time you spent at the shop probably could have gotten the transaxle ready to be removed. post some pics mate ;) and not from your for sale thread..
_isiah
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.