PDA

View Full Version : Questioning effectiveness of new set-up, TD06 20G kit



gs1000kat
02-28-2011, 01:35 PM
I bought the Pitroad M TD06 20G set up from CANENAC/Keith(from the other site (http://www.3si.org/forum/f4/performance-part-out-pitroad-m-greddy-aem-tein-etc-511373/)(components listed below) and I'm wondering if it is too big for what I realistically need. I'm thinking 500AWHP would be all I really need and at this point, I'm looking at using a forged 3.0.

Here is what I have(copied from his ad):


td06 20g Greddy/Pitroad M turbo kit.This kit is bolt on with no modifications needed. Used and has around 5k+- miles on it.
It will include Greddy td06 20g Turbos, Greddy td06 Headers, Greddy Downpipes with external dumps, oil lines, Greddy external wastegates, Greddy BOV, apexi filters (blue), Greddy type Front Mount Intercooler with all couplers and t-bolt clamps that bolt to turbo kit. This is a complete kit that is unique and not many people in the states have due to Pitroad M of Japan being one of the only able to sale kit. You will not be disappointed trust me! This is not some crappy kit this was design by Pitroad M/Greddy and very high quality parts.
PRICE DROP!!! Asking $3,700 or best offer.

AEM EMS ver 1 with IAT, 5bar map. Used with around 5k on them.
added pics in post #15 on 2nd page
PRICE DROP!!! Asking $1,000 or best offer.

1000cc Lucas Injectors. Brand new never installed.
PRICE DROP!!! Asking $300 or best offer.

The kit looks awesome, has everything needed and I'd love to use it.

My questions I have right now:
Is the set-up overkill for 500 AWHP?
If not overkill, would there be a lot of lag?
Is the AEM EMS necessary or recommended?
Would I be better off to sell this kit and buy something different(thinking IPS EVO III kit)?

http://www.3si.org/forum/attachments/f4/83825d1294323283-performance-part-out-pitroad-m-greddy-aem-tein-etc-engine.jpg
[IMG]http://www.3si.org/forum/attachments/f4/83826d1294323294-performance-part-out-pitroad-m-greddy-aem-tein-etc-front-turbo.jpg

DocWalt
02-28-2011, 01:41 PM
It's overkill IMO, and there would be a lot of lag. 20G turbos are pretty outdated.

IPD
02-28-2011, 07:06 PM
the fact that it come with the FMIC might be the only saving grace. dr750's are cheaper than that. while 20g's aren't "bad" necessarily, they aren't the best turbos available--especially for a stock 3.0L engine. it will be VERY laggy, imho.

if 500awhp is your goal, you can probably do it with billet dr650's for about 60% of the cost of that kit. and those are BOLT-ON, have substantially less lag, etc.

p.s.

for 500awhp, you can do it on a piggyback. there's an open debate on arc2 vs. maft (either with or without an safc). frankly, both work. ray prefers one, matt prefers the other. you don't need AEM to get there.

that said, you will always be able to get the absolute maximum out of your setup--easier--if you go with AEM. be prepared to pay for the cost of it twice; as getting it fine-tuned for all operating conditions is a lengthy process. (it's really a damn shame we don't have any aftermarket ECU replacements with pre-mapping available. many other platforms do. it's essentially an AEM; but instead of tuning, you get a map for someone with mods similar to yours, and plug it in. tuning only takes an hour or two; vs. 5x that or more).

gs1000kat
02-28-2011, 11:21 PM
Sorry I didn't get back in here sooner. I am subscribed, but didn't get notification that there was a post here.

What you guys said is what I am learning. When I bought it, I didn't really have a plan of 500HP, just thought I would be a great start to a powerful car. After some thought, I realized that I don't really need much more than 500HP or so and this kit is probably too much for that. Thought about going with a 3.5 stroker to make it more usable. Still an option, but not for a while down the road.

I'm not real fond of going with AEM which is why I asked the question.

IPD
03-01-2011, 02:58 AM
i'm confused. you already bought the kit, or are you referring to buying the car?

fwiw, you could probably make MASSIVE power from a td06 kit; but you'd need to get a stroker & find a set of td06 turbos with some billet compressor wheels (ideally, ask matt M. at dynamic if he can get you a set made with the same type of goodies his dr750's have). if you did that, you could probably get the setup to where it was spooling by 3,000 rpms and was pushing 800+hp on pump. problem is; even if you used those turbos as cores (assuming they're good) it would cost you 2-3k extra to get them customized as thus.

meanwhile, you could have stayed bolt-on & made 500awhp on pump (assuming you have the right turbos). or you could go td05 16g kit (which would be pimp-tastic if you got the billet 16g's).

p.s.

the word of mouth i've heard is that the IPS 16g kit is designed a bit better than the 3sx one. i'm personally getting one of the new SSM 16g kits; and i have high hopes for it (stay tuned for my thoughts--once i receive all the pieces).

p.p.s.

you didn't mention what car you have. if you have a 91/92; don't even THINK about going for big power without doing an engine rebuild. there is no proven limit to what the cast crank's in those years can hold; and frankly--you don't want to find out what yours can do. the MOST i've ever heard of one making is ~400awhp. i've heard of a lot more breaking though.

gs1000kat
03-01-2011, 10:34 AM
I have been considering doing some kind of build with one of my 3S'. No real plan as to what I wanted or even which car. This came up and I checked it out. Ended up trading my Stealth TT for the kit.

Then I started thinking that these probably had more potential than I really needed and had read about TD06 being laggy.

The IPS EVO III kit is what I am probably going to end up with.

As far as engine, I am buying RAI's car that has a PMP stage 2 block in it, plus a little later I will pick up another Stealth parts car that comes with a forged shortblock.

Chris@Rvengeperformance
03-01-2011, 10:47 AM
I don't think you'll see any boost below 5000 RPM. Probably 6000 RPM before full boost.

Emilie@GZP
03-01-2011, 10:57 AM
TD06's will be quite laggy. Even the td05's (evo3's) will be quite laggy. They were fun, but the lag kind of leaves you wanting just a little bit more from the set-up.

Are you dead set on upgrading to td05's? You can EASILY achieve the 500awhp mark on the td04 turbos that are now coming onto the market.

We are in the process of building our yellow 95 VR4 with our new turbo set-up that will be released in the next few weeks.

If you would like some more info on it, shoot me a message, and I can give you some details.

Chatzvr4
03-01-2011, 12:06 PM
Sorry I didn't get back in here sooner. I am subscribed, but didn't get notification that there was a post here.

What you guys said is what I am learning. When I bought it, I didn't really have a plan of 500HP, just thought I would be a great start to a powerful car. After some thought, I realized that I don't really need much more than 500HP or so and this kit is probably too much for that. Thought about going with a 3.5 stroker to make it more usable. Still an option, but not for a while down the road.

I'm not real fond of going with AEM which is why I asked the question.


I ran Td05's for a few years. 500HP is very doable with them. And there isnt much lag as long as the headers are done right. TD04 turbos are great but I was able to get more power out of TD05's on pump gas then td04's If you are thinking about going 3.5 i would recommend the TD05's as you will not need the upgrade later.

If you need a complete TD05 kit with FMIC and intake pipes let me know or just check out our site. Split Second Motorsports - Performance Parts (http://www.splitsecondmotorsports.com)

EthanS
03-01-2011, 12:34 PM
p.p.s.

you didn't mention what car you have. if you have a 91/92; don't even THINK about going for big power without doing an engine rebuild. there is no proven limit to what the cast crank's in those years can hold; and frankly--you don't want to find out what yours can do. the MOST i've ever heard of one making is ~400awhp. i've heard of a lot more breaking though.

Where are you hearing of so many breaking with so low of power levels?

Chris has man 10second passes and 800+ awhp dynos with a 2 bolt with one of his gridle kits.

Hillbillyhomeboy had a gt42 setup on a 2bolt with somewhere around 8-900awhp

I used to daily drive a 15g car with 421awhp and... a 2 bolt.

DocWalt
03-01-2011, 04:25 PM
It's not that it's a 2bolt, it's the cast crank. It WILL fail eventually, and can even fail on a stock engine.

gs1000kat
03-01-2011, 04:44 PM
If I were to use, it would be with a forged bottom end. I have listed the kit for sale on here and 3si. I'll find something that suits my needs better.

gs1000kat
03-01-2011, 04:47 PM
TD06's will be quite laggy. Even the td05's (evo3's) will be quite laggy. They were fun, but the lag kind of leaves you wanting just a little bit more from the set-up.

Are you dead set on upgrading to td05's? You can EASILY achieve the 500awhp mark on the td04 turbos that are now coming onto the market.

We are in the process of building our yellow 95 VR4 with our new turbo set-up that will be released in the next few weeks.

If you would like some more info on it, shoot me a message, and I can give you some details.

Missed this post, somehow. Sorry about that.

No, I am not set on anything at thispoint. Was leaning toward the IPS EVO III kit, but nothing set in stoine at all at this point.

The Stealth I am picking up in a few weeks has 19Ts on it, but they are LMIs and are coming off as soon as I can get my grubby little fingers on them.

gs1000kat
03-01-2011, 04:53 PM
I really don't know what directin I want to go, but I do know that I don't want to tune with Meth or Nitrous or anything like that that i wouild need to keep an eye on. E85 would be OK, but there are no pumps around here.

EthanS
03-02-2011, 12:12 AM
It's not that it's a 2bolt, it's the cast crank. It WILL fail eventually, and can even fail on a stock engine.

Yes, understandable. All two bolt cars (91-92) have cast crankshafts. Even a forged crank will fail eventually. The cast crank isn't made out of tooth-picks and clearly it doesnt fail as soon as you go over 400awhp. Thats all I am saying before people misinform this board.

500awhp could easily be had with tdo4, however, on a tdo4 setup you will be pushing a LOT more hot air. Therefor something like a tdo5-16g setup could have more lonevity. For OP's power goals.

IPD
03-02-2011, 01:04 AM
explain that to me again...cause i could have SWORN all motors after 93 came with forged cranks.

Chris@Rvengeperformance
03-02-2011, 01:41 AM
explain that to me again...cause i could have SWORN all motors after 93 came with forged cranks.

correct

EthanS
03-02-2011, 03:12 AM
My applogies, I don't know what I was thinking. Misinformation edited and removed.

11secondFWD
03-02-2011, 11:20 AM
Sell and buy dr750's. The 750s were cheaper than that kit, will get the power you want and more and not have the lag of the 06 20g's

DocWalt
03-02-2011, 11:50 AM
Yes, understandable. All two bolt cars (91-92) have cast crankshafts. Even a forged crank will fail eventually. The cast crank isn't made out of tooth-picks and clearly it doesnt fail as soon as you go over 400awhp. Thats all I am saying before people misinform this board.

500awhp could easily be had with tdo4, however, on a tdo4 setup you will be pushing a LOT more hot air. Therefor something like a tdo5-16g setup could have more lonevity. For OP's power goals.

Yes, but why take the riskier path?

EthanS
03-02-2011, 12:40 PM
Yes, but why take the riskier path?

My philosphy on this is different that yours, is that ok with you?

Run what you have. If it isn't broke don't fix it. Budget build if this is your first engine build so that you don't trash thousands of dollars in parts for one n00b mistake. It isn't going to fall appart at over 400awhp unless its improperly tuned or built. A new forged crank costs over $850 + rod and main bearings, cash that could be spent on getting it tuned PROPERLY. It's not likely that it will completely trash the engine if it goes, you will probably just spin a rod bearing then go buy a forged crank and some new bearings when you need to.

jba3
03-02-2011, 03:47 PM
While the DR750s are cheaper than the kit - don't overlook that the kit comes with the FMIC, all the piping, the AEM - AND 1000cc injectors. Add those up with the DR750s, and you're looking at MUCH more than the kit cost.

That said, yes, that is very much overkill for 500awhp on pump. TD04s can make it, TD05s can make it easier. I've seen a lot of TD05 Evo3 pump gas cars making 500+, and full boost around 4k rpms. But note that full boost on those is usually 18-22 psi, so "full boost" should not be compared with 12psi on 9Bs at 3k rpm, it's apples and oranges. Boostaddict made 667awhp on Evo3s on a 3L with meth and/or race, and JRink has made 750awhp on meth/race.

I've got an IPS TD05 Evo3 kit for sale that came off Mike @ C3 Motorsports personal car with less than 5k miles on it. Manifolds, turbos, outlet pipes, the DSM J pipes, downpipe and lines. Even billet DR650/750s are just the turbos, so if you don't already have upgraded precats, downpipe and manifolds, you have to count the extra cost for those on top of the turbos too. I have a thread in the FS section, or PM me if you're interested.

IPD
03-02-2011, 03:52 PM
"run what i have". yeah. since i'm shooting for 500awhp, i wasn't even going to try doing it on my current motor; because of the cast crank. if i HADN'T had a cast crank, i'd probably have just used what was there. since i don't have one; i ponied up for a stroker. if i'm going to start fresh; might as well do it right the first time.

DocWalt
03-02-2011, 08:55 PM
"just spin a rod bearing" Yep, like that's going to be cheap to fix properly.

11secondFWD
03-02-2011, 10:44 PM
While the DR750s are cheaper than the kit - don't overlook that the kit comes with the FMIC, all the piping, the AEM - AND 1000cc injectors. Add those up with the DR750s, and you're looking at MUCH more than the kit cost.

Does it come with all that? It looked to me like the turbo kit was for sale and the rest was for sale separate. But I will double check.

11secondFWD
03-02-2011, 10:46 PM
ok its turbos and fmic, not injectors or aem ems with the kit he bought for 3.7k.

jba3
03-03-2011, 03:56 PM
ok its turbos and fmic, not injectors or aem ems with the kit he bought for 3.7k.

Oops, I was going off the FS thread here (http://www.3sgto.org/f62/pitrad-m-td06-20g-kit-including-inj-aem-ems-fmic-etc-3909.html) that he had recently posted for everything as a package deal. I didn't click the link to the 'dark side'. ;)

gs1000kat
03-03-2011, 04:23 PM
Sell and buy dr750's. The 750s were cheaper than that kit, will get the power you want and more and not have the lag of the 06 20g's

Could be a viable option. I'll look into them. Thanks

gs1000kat
03-03-2011, 04:27 PM
Does it come with all that? It looked to me like the turbo kit was for sale and the rest was for sale separate. But I will double check.


ok its turbos and fmic, not injectors or aem ems with the kit he bought for 3.7k.


Oops, I was going off the FS thread here (http://www.3sgto.org/f62/pitrad-m-td06-20g-kit-including-inj-aem-ems-fmic-etc-3909.html) that he had recently posted for everything as a package deal. I didn't click the link to the 'dark side'. ;)

I traded a Stealth TT for the kit. i am selling the whole set up for $4100.00 shipped - headers, turbos, wastegates, BOV, IC and piping, EMS, 1000cc injectors.

gs1000kat
03-03-2011, 04:55 PM
I'm not limited by a HP number. I would love to get a 3.5 from Ray and slap this bad boy on it and make a ton of HP. I just don't think my finances will allow all that would be needed to take the abuse of it. I plan to beef up the drivetrain to some degree, but I think making full use of this would take more than i care to do.

gs1000kat
03-10-2011, 11:03 AM
I've just been offered a trade for the set-up below plus cash. I'm thinking this kit plus $1000-1300 in cash Good trade?

[QUOTE]TD04 setup with t3 super 60 wheels, gt-pro headers, and a dejon tool fmic, dnp rear 02 housing. The FMIC was on the car as well and it's going in for powdercoating this week. The front header has <100 miles and the rear has 0 miles.

Turbo Beast
03-10-2011, 11:42 AM
GT-PRO TD04's? Powercoating the IC piping i presume? How many miles on the turbo's?

gs1000kat
03-10-2011, 11:49 AM
They are TD04, no idea about the GT-Pro though. Turbos have around 5k according to the seller. Apparently they used to belong to GrungeAholicVR4

I can only assume he means the IC piping is getting PC.

krazi
03-15-2011, 08:01 PM
Hey thought i would throw this out there for billet wheels for this setup.

Billet Compressor Wheel 20G for TD05 (http://cgi.ebay.com/ebaymotors/Billet-Compressor-Wheel-20G-TD05-TD06-/130475162978?pt=Motors_Car_Truck_Parts_Accessories&hash=item1e60ecfd62)

gs1000kat
03-15-2011, 08:23 PM
Hey thought i would throw this out there for billet wheels for this setup.

Billet Compressor Wheel 20G for TD05 (http://cgi.ebay.com/ebaymotors/Billet-Compressor-Wheel-20G-TD05-TD06-/130475162978?pt=Motors_Car_Truck_Parts_Accessories&hash=item1e60ecfd62)

Hmmmm, interesting find. Too bad he only has a feedback score of 8. They are also Taiwan which makes me nervous. It does show that they may be available elsewhere though.

krazi
03-15-2011, 08:38 PM
I'm going to try them for my buschur 20gs I have. There 1piece aluminum so don't think there will he problems

Gushers
03-17-2011, 12:28 PM
Hey thought i would throw this out there for billet wheels for this setup.

Billet Compressor Wheel 20G for TD05 (http://cgi.ebay.com/ebaymotors/Billet-Compressor-Wheel-20G-TD05-TD06-/130475162978?pt=Motors_Car_Truck_Parts_Accessories&hash=item1e60ecfd62)

TurboByGarrett.com - Race Updates (http://www.turbobygarrett.com/turbobygarrett/news/race_updates/Garrett_Fully_Machined.html)