Mitsubishi GTO LM Edition©

[colt45 gto]

Ok i took my thread from where it lived and put it here. i'm sure it will bring happiness to the future masses.

as i said somewhere along the line...not so long ago!

i'll be trying to recreate the car that never was. today i have been to see the donor car '92 GTO TT its currently sat under another car, lol yes its holding another car in the air but roof should pop right out! if not get a roof of another and replace it.

it has panel damage along the sides but the doors are good. not that i'm really bothered about panel damage i'll be recreating with aluminum for weight purposes.

all i am waiting for now is the motor and transe to be removed and the rest is mine, its also getting delivered :D

so i will say that in a week maybe less i'll be starting the LM edition project :D

whats that pics or ban? haha here ya go. this should keep you hyped!
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs144.snc1/5328_1204962290025_1407677767_596522_5554762_n.jpg
http://photos-d.ak.fbcdn.net/hphotos-ak-snc1/hs144.snc1/5328_1204962330026_1407677767_596523_2183431_n.jpg

[colt45 gto]

this isn't easy by any means but after a day.....i'm getting there damn its going to need some wide shoes... possibly 335 tires:eek:

anyway...i know its like Frankenstein's monster right now but give it a few days when all panels are made (btw fuck the weight saving), the steel i'm using is actually just as heavy as the original panels if a 1lb heavier. and i cut those out so i may gain a little i may break even see how it goes. i decided to fuckit and use the puma, i know its strong!
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs146.snc1/5408_1210588710682_1407677767_614450_3399654_n.jpg
http://photos-d.ak.fbcdn.net/hphotos-ak-snc1/hs146.snc1/5408_1210588830685_1407677767_614451_466865_n.jpg

oh almost had a bad accident too. cutting disk broke on the grinder and almost took my finger with it, good job i had no gloves on or i would have had no cut to prove it :lol:

i figured out my rims will do the job :D

looks freakin evil :bigok:

got to give the rims a good clean and mirror polish on the inners but thank god for 3 way split rims :D
http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs126.snc1/5408_1211203646055_1407677767_617223_4103995_n.jpg
http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs146.snc1/5408_1211203926062_1407677767_617230_8035348_n.jpg
http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs146.snc1/5408_1211203966063_1407677767_617231_1039246_n.jpg
http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs146.snc1/5408_1211203686056_1407677767_617224_4044412_n.jpg

[colt45 gto]

you guys will be shocked to know that the only tools i have to do this are....

mig welder (i'm crap with)
pair of tin snips
1 long reach body grips
1 medium reach body grips
1 vice grip
body planeshing hammer and half round dolly
tape measure
angle grinder (with exploding cutting disks)

thats it! no folding machine
no wheeling machine
no other special machinery

this is back to basics bodywork

and that £20 i set in the rim lip....i got £10 left thats it. its cost £75 upto now i need 2 more sheets of metal costing £20 and i have all i need to complete barring paint/primer.

talk about projects on a budget lol. i'm broke but i dont give up :D

this is a sketch of reality...
you know you want to do something different, and the impatience of getting started means you dont wait for the donor shell to arrive. you stand back and look at a perfectly good car armed with an angle grinder with a cutting disk fitted. the worst part is firing up that grinder and hitting a perfectly good panel for the first time! knowing you just hit the point of no return! i think it makes you more determined to do it right first time round.

you know i didn't! i cut the front fender up and started to creat the wide fender....it went pear shaped, so i cut off that and started again, and again it didn't come out right! so to give myself a break from this i cut the rear panel out and part of the inner arch, i then cut a strip of steel and tacked that in place extending the inner arch by 125mm then started to form the outter to that. this option i dont have fro the front fenders, there is simply nothing to work off.

its a real scary project one that gives me mixed feelings already that... yes i will complete the rears but at the same time unsure about the fronts. i have also had to lengthen the rear bumper by 3 inch so it meets the rear fender, i done this by cutting a direct straight line out of the bumper and riveting a piece of alu between it to connect it then use bridger to fill the gap and smooth it over.

to give your selves an idea of how scary it is.....grab yourself a grinder and stand by your car. its enough to make a grown man cry...and i did shed a tear when i made the first cut.

[colt45 gto]

ok little update...

one rear 1/4 is finished, hard part is matching it perfectly on the other side. the fronts i'm going to have major issues with unless i reconfigure the whole suspension, i cant have the wheels inverted on the front it will severely unbalance the car in a turn, so 'ill have to add 7" to everything on the front....some how?

but anyway... rear fender.
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1213599745956_1407677767_626818_5595106_n.jpg
http://photos-d.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1213599785957_1407677767_626819_677457_n.jpg
http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1213599865959_1407677767_626820_4526865_n.jpg
http://photos-f.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1213599905960_1407677767_626821_7365601_n.jpg
i put a piece in for the runner just for effect, the one that will go in will be a thicker sheet of alloy
http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1213600025963_1407677767_626823_1933365_n.jpg
http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1213600065964_1407677767_626824_168699_n.jpg
http://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1213600145966_1407677767_626825_5671155_n.jpg
thats a fat ass!
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1213600185967_1407677767_626826_1011088_n.jpg

[colt45 gto]

other rear now its looking Fat and Phat!
first couple i managed to take some time out to snap the build on the inner arch... the rest follow.
http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1214301683504_1407677767_629526_4443108_n.jpg
http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1214301803507_1407677767_629527_5621674_n.jpg
http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1214301843508_1407677767_629528_1893789_n.jpg
http://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1214301883509_1407677767_629529_2468058_n.jpg
http://photos-d.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1214301963511_1407677767_629531_3626152_n.jpg
http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1214302003512_1407677767_629532_1641717_n.jpg
http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1214302163516_1407677767_629536_1708514_n.jpg

right decided not to go very wide with the front fenders, i can make this look right with a subtle change of 2.5" at the start of the arch to 1.5" at the top raising to 3" on the back side, this keeps the fender in a direct straight drop and follows the wheel line perfectly. also the side skirt will flow in a slight curve to the rear fender in keeping with the original shape of the car and not so much of a stride to get in and out. altho it would have been terrific to watch saz tryin to get in and out with a skirt on :lol:

i'm not putting any more pics up now til i'm ready for paint, so you guys will have to wait for the major updates which will probably be early next week.....

wait i'm skint so i'll be workin on it all weekend too... maybe sunday before updates lol
well i'm a day early but today (since 5.30
am) i have made good progress.... here are some updates. tell me what you think and any comments suggestions on the side skirt.

[colt45 gto]

http://photos-d.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1216200210966_1407677767_634731_6525853_n.jpg
http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1216200250967_1407677767_634732_7537863_n.jpg
http://photos-f.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1216200290968_1407677767_634733_3360339_n.jpg
http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1216200330969_1407677767_634734_6081261_n.jpg
http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1216200410971_1407677767_634735_4382154_n.jpg
http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1216200450972_1407677767_634736_4756818_n.jpg
http://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1216200490973_1407677767_634737_8200760_n.jpg
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1216200530974_1407677767_634738_1711243_n.jpg

lol oops!....
car fell of the jack stands :lol: luckely it stopped when it hit the floor.
http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1217583405545_1407677767_639878_7536396_n.jpg

[colt45 gto]

getting on with the front splitter now....fiberglassing isnt really that hard apart from you make the mold inside out lol. use my kneeling foam pad and cut a curve popped it in trash bags and made the bulk of the splitter only thing is i got to do it in 2 halfs. also made a brake vent in the front bumper easy when its been extended anyway ;)
http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1217583445546_1407677767_639879_7313648_n.jpg
http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1217583485547_1407677767_639880_936821_n.jpg
http://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1217583525548_1407677767_639881_4604627_n.jpg
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1217583565549_1407677767_639882_482824_n.jpg

also if you look back at the rear vent you will see a louvered back plate to stop shit going onto the body from the wheel.... kinda ingenious because thats half of a porsche 944 alu underguard ;)

just noticed the dates on the pics....ignore those. i didn't have this car in '07 lol
after some delegation with the front splitter today and putting some wheels back together and finishing off the fabrication of the running boards i managed to get the bugger on its feet. the splitter needs to come down 2 inch :( , my rear wheel rubs the arch on one side... kinda thinking that the shock there is the bad one its the only one that rubs. but apart from this and the fact i have been fighting my way through the pain again today... here are some pics.....
http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1218906158613_1407677767_644704_111335_n.jpg

[colt45 gto]

http://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1218906198614_1407677767_644705_1848913_n.jpg
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1218906238615_1407677767_644706_1054335_n.jpg
http://photos-d.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1218906278616_1407677767_644707_2245103_n.jpg
http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1218906398619_1407677767_644710_7845656_n.jpg

i think the front needs to be wider or i need to put something between the front and rear fenders? but thats just me and if i do i'll be a mile off how the car should look... in all honesty looking at it in the daylight its a mile off anyway :(..... still looks phat tho :D

itsy bitsy update.......

i realised i had no fuel filler and tomake the neck/cup and everything els then buy an alu filler cap.... aint got the money so i used what i have....... the original door and cup. just moved it to the top of the fender... actually looks better than alu ones, looks like its meant to be there :D

http://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1224441016981_1407677767_661753_4071384_n.jpg
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1224441056982_1407677767_661754_4959844_n.jpg
it allstill functions on the lever too so double bonus ;)

[colt45 gto]

pics... or some
http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1224984030556_1407677767_662944_3967785_n.jpg
http://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1224984070557_1407677767_662945_6247383_n.jpg
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1224984110558_1407677767_662946_2618100_n.jpg
http://photos-d.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1224984150559_1407677767_662947_2798239_n.jpg
http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1224984190560_1407677767_662948_4846372_n.jpg


ok pics are a bit shit, cant find the white balance on the camera (its saz's cam) here goes...
http://photos-f.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1228680922976_1407677767_675021_4661583_n.jpg
http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1228680962977_1407677767_675022_5757054_n.jpg
http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1228681002978_1407677767_675023_6076391_n.jpg
http://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1228681082980_1407677767_675025_1818074_n.jpg
this is only a test side to see how it would look. the real work starts tomorrow. sanding, smoothing etc etc then paint thursday

[colt45 gto]

small teaser. took these with my cell on purpose!

the car will go in full color possibly saturday maybe tomorrow afternoon? but here is something for you ugly lot to jack off to :P
http://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1230016396362_1407677767_678377_2647531_n.jpg
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1230016436363_1407677767_678378_1046266_n.jpg
http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1230016516365_1407677767_678380_8245588_n.jpg
http://photos-d.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1230016476364_1407677767_678379_5576778_n.jpg

http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1230709413687_1407677767_679896_6105890_n.jpg
http://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1230709453688_1407677767_679897_488177_n.jpg
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1230709493689_1407677767_679898_2363126_n.jpg
http://photos-d.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1230709533690_1407677767_679899_4590818_n.jpg
http://photos-f.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1230709613692_1407677767_679901_4898258_n.jpg
http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1230709653693_1407677767_679902_1891251_n.jpg

[colt45 gto]

http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1230709693694_1407677767_679903_7999005_n.jpg
lil update.....apart from a few finishing touches and the fact i'm not happy with it.....its finally back on the road....
http://photos-f.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1231369670193_1407677767_682181_4388633_n.jpg
http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1231369710194_1407677767_682182_3676199_n.jpg
http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1231369750195_1407677767_682183_7784932_n.jpg
http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1231369790196_1407677767_682184_1177091_n.jpg
http://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1231369870198_1407677767_682185_3923479_n.jpg
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1231369910199_1407677767_682186_3045870_n.jpg
http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs204.snc1/7127_1231369990201_1407677767_682188_3137143_n.jpg

ok i had a change of heart with the rims.

black rims on a lip so deep on the rear just didn't work! the car i modeled this off has yellow rims so i went with that. basically got bored yesterday.
http://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1237339499435_1407677767_701785_4614582_n.jpg
http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs224.snc1/7127_1237347939646_1407677767_701828_5447746_n.jpg

[ballermj23]

GREAT!!! that just looks great...



Mitsubishi GTO LM Edition© FTW!!!

[Atrosity]

Looks nice!!! Still doing the white paint idea?

[colt45 gto]

hahaha no mate i aint owned the car for months now. apparently its in ireland and in white. looks good too.

[Atrosity]

hahaha no mate i aint owned the car for months now. apparently its in ireland and in white. looks good too.

Oh gotchya gotchya!

[92RT-TT]

You sold it? what a bummer man. Good job on it though!

[ZKruly87]

i didnt realize how much you put into that car mate :( i should have bought it off you when you offered

[colt45 gto]

you wouldn't have liked it zach lol i hated it after i biult it.

good to look at but crap to drive. imagine a dualy over here? hahaha

[92RT-TT]

Did you ever get wide tires for it before you sold it? Some nice 13 inch wide rims with 355's or something?

[colt45 gto]

no they are still the same now apparently just a different color lol

[Mr Faust]

Damn that's a shame that you sold it, I would put some mondo fucking rubber on that bad boy.

[Sazzy77GTO]

Do you know what I love most about this car the fact that Dave can put the © at the end of it.

And its all in his name lol

[Hans@GZP]

It's a shame that all anyone has to do is change any dimension of that kit a little bit for it to be different.

[CoreyB]

Bad ass.

[colt45 gto]

It's a shame that all anyone has to do is change any dimension of that kit a little bit for it to be different.

but the fact remains they cant name it a GTO LM Edition, they could name it a wide body, abortion or a pedo fucker if they want. once they name it what it is then its copyright restricted.
http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs661.snc4/60121_1602251862016_1407677767_1646949_6576144_n.j pg

[x2percentmilk]

man i remember when you first started this i was sad to watch the puma gto replica go.
but half way through the build i was so excited i didnt care.
came out great. thumbs up :)

[Hans@GZP]

How about Widebody GTO LM Edition?

[CoreyB]

Why ?

[Atrosity]

How about Widebody GTO LM Edition?
haha
What about GTO Widebody LM Edition??

[colt45 gto]

i'm not one for making things for others.

[Emilie@GZP]

you should make the sideskirts and sell them or someone should start making sideskirts like the pic below
http://memimage.cardomain.com/ride_images/2/4637/1181/24090590044_medium.jpg
http://memimage.cardomain.com/ride_images/2/4637/1181/24090590015_medium.jpg

Cianci already does. He makes that entire kit.

[colt45 gto]

Cianci already does. He makes that entire kit.

yep they do it better than me.

[Emilie@GZP]

yep they do it better than me.

they also have a dedicated staff of mexicans. If you had a staff of mexicans, you could do it too. LOL

[colt45 gto]

hahaha yeah then i could sit back and watch them work lol

[dfoster101]

i remember seeing this car on youtube months ago ... all i could do was play drool replay and drool some more ... why isnt it any fun to drive tho? looks like it handled n rode great to me

[colt45 gto]

it drove and handled beautifully it was simply too wide for our roads.

[Sazzy77GTO]

it drove and handled beautifully it was simply too wide for our roads.

Its was horrid to drive around town, but when one the freeway and you could open it up then it sat into the road just right and stuck to the road like glue ;)

[colt45 gto]

dunno if it makes any difference but pitroadm subscribed to my youtube vid of the car today. they better not be nickin my idea lol

[I-AM-FURLONG]

WOW!!!!!!!!!!! That is amazing. What a transformation

[deadlylegacy]

Cianci already does. He makes that entire kit.

They make that widebody? They make the Novara which is similar, but that's a custom job. Completely custom. Unless Cianci got rights to that particular widebody (not the Novara, which they already make).

[paul_666]

Just watching to see if both your old cars can be on ebay at the same time! :)

Yellow GTO (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=300470806767&ru=http%3A%2F%2Fshop.ebay.co.uk%3A80%2F%3F_from%3D R40%26_trksid%3Dm570%26_nkw%3D300470806767%26_fvi% 3D1&_rdc=1)

:D

[colt45 gto]

haha what a POS that one was! i've had 3 good GTO's and 2 bad ones. unfortunately sarahs first was also a bad one but it hasn't deter'd her ;)

[Emilie@GZP]

They make that widebody? They make the Novara which is similar, but that's a custom job. Completely custom. Unless Cianci got rights to that particular widebody (not the Novara, which they already make).

They make THAT widebody, in addition to the Novara kit. They don't need the rights to manufacture that bodykit. They are not using his molds, and making one NEARLY identical to it.

[SkorpioLT]

OMG Gran Turismo 1 !!!!!! ahh the memories..... looks amazing!