OS GIKEN R2CD Twin Disk Clutch

[Chatzvr4]

ok i have a os giken R2CD twin disk clutch set for a VR4/RT/TT has under 1000 miles on it. This clutch can hold damn near anythign you throw at it. comes complete with flywheel/clutch basket, clutches, plates and release bearing MSRP is 2300.00 asking for 800.00 shipped OBO

[MR2]

CD is Carbon right?

[Chatzvr4]

CD is Carbon right?

honestly I do not know. I can not seem to find that much info on the clutch. I have had it for a couple of years but it has not seen much action at all. I know the housing cover plate is aluminum and the whole thing weighs a little more then a stock flywheel

[MR2]

Damn, looks like it's a Metal clutch, oh well good luck!

[2fnloud]

You sure this is for a 3s? According to the OS Giken website the R2CD is for the Lancer EVO and Legnum VR4. The clutch listed for the 3s is TS2C

Here is a break down of your clutch according to OS Giken:

R= Type of clutch cover (Billet aluminum for center hub plate) 2= number of plates in the clutch (2) C=Diameter of clutch plates (215 mm) D= Remarks (Spring Damper)

[Chatzvr4]

You sure this is for a 3s? According to the OS Giken website the R2CD is for the Lancer EVO and Legnum VR4. The clutch listed for the 3s is TS2C

Here is a break down of your clutch according to OS Giken:

R= Type of clutch cover (Billet aluminum for center hub plate) 2= number of plates in the clutch (2) C=Diameter of clutch plates (215 mm) D= Remarks (Spring Damper)

Yes this is for the 3/S fits perfectly and never had a problem with it.

[mb7050]

It looks somehwhat like this ?
http://www.pitroadm.com/public/DRIVE%20TRAIN/PARTS/R2cd.jpg

how streetable is this clutch ?

[2fnloud]

Yes this is for the 3/S fits perfectly and never had a problem with it.

OK well at least I decoded it for you.