View Full Version : Article: Ball Joints Replacment Options and Installation Instructions
thestealth
01-31-2011, 06:29 PM
You can view the page at http://www.3sgto.org/content.php?r=160-Ball-Joints-Replacment-Options-and-Installation-Instructions
dfoster101
02-10-2011, 12:32 AM
im confused are you saying you can or cannot get ball joints at a parts store ?
Rocket
02-16-2011, 09:08 PM
im confused are you saying you can or cannot get ball joints at a parts store ?
If you go to a parts store and ask for a lower ball joint for a 3S they will tell you no. You can only replace the lower control arm assembly. Last I checked it was $435. What this howto does is show you how to not buy a lower control arm, but use a ball joint that happens to fit the hole in the lower control arm when you remove the old ball joint. I will be doing this coming up shortly. Can't wait :)
Brandon
mcshooter
02-19-2011, 05:15 PM
if you do not have plies to put the clip back on just bend one end up a little with pliers.. then put the clip on and tap back down into the slot the end you bent up. very easy to do
Mike-92RT
05-12-2011, 07:29 AM
correct me if im wrong here. But i believe the ball joints are the same as the Eagle Talon.
You can get search for individual ball joints for the 3S on eBay too.
Rkaynjehll
12-11-2013, 03:19 PM
I just bought a pair of ball joints from 3sx.com havent installed them yet, but they have them -3000gt
tampabaydsm
06-21-2016, 06:02 PM
Moog K9855 Ball Joint.
I knocked the stock one out with a BFH (Big Freaking Hammer) And push the other in with a ball joint press tool.
The C Clip is a big pain.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.