View Full Version : AWD Question...
WestAusGTO
01-20-2011, 12:22 AM
I'm thinking about buying a set of Federal 595 RS-R (R Spec) tyres. But I'm wondering if the extra grip could result in something giving way other than the tyres..
I do some short course racing which involves a standing start, so I usually launch with a tiny bit of wheelspin..
Anyone had experience here ?
Car is BPU TT GTO with 13gs to be fitted soon..
Austin@STM
01-20-2011, 12:58 AM
As long as your not dumping the clutch the drivetrain should hold just fine, i've been on the stock drivetrain for a couple years without any problems besides an output shaft wearing out. If its treated right it can handle a lot.
The one thing to be sure of is that all 4 tires are the same diameter. If they are different sizes they will take out the driveline real quick.
Hans@GZP
01-20-2011, 10:25 AM
It really depends on what you have in your driveline. 5 speed, 6 speed? If 5 speed, is it 18 spline or 25 spline?
WestAusGTO
01-23-2011, 10:45 PM
It a stock 1990 (believe it or not) 5 speed ...
Hans@GZP
01-23-2011, 11:16 PM
Then it should be an 18 spline. I would consider upgrading the output shaft. Other than that, the trans is pretty stout. The transfer case is always a risky item, but you should be ok with a 13G turbo setup on a stock transfer case.
R/T93
01-23-2011, 11:20 PM
I feel you, I still havent all out launched my car for fear of breaking something then taking 1000$ or more to fix, and the car being down a couple weeks....
It's all in the launch technique though, do as Austin says, dont dump the clutch.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.