Got Some Parts To Sell Off The Stealth That I Wont Need This Racing Season

[Austin@STM]

First up is my stock turbos, they have been great to me for the 2 years i've owned the car. They now have 80k on them and are still nearly perfect! This is the first time they have been off of the car.

As most of you know these turbo have been pushed to the max, i raced with them several times in the time i have had the car, and never once had an issue with them.
On the dyno they squeezed out 23psi and on the track ran a consistent 19psi every single pass. Never a puff of smoke and the intercooler piping doesnt have a spot of oil in it.

I'll start at $350 for them, still bolted to the headers so no broken bolts:D
- also all lines are still attached and ready to bolt right in.

http://sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs261.snc6/178980_1783497755516_1481643354_31955656_2589604_n .jpg


- Next up is a great condition fuel sender, all the connections are good, the feed line is just barely rounded, but still very usable. There is just a little bit of surface rust but otherwise mint.

$100 for just the sender, or $150 with the walbro 255 in it.

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs782.ash1/167233_1783498075524_1481643354_31955658_6651825_n .jpg


- I have a used walbro as mentioned above, couple years old, but no issues ran great pressure, and wasnt run dry.

I'll take 60 for it, unless it sells with the sender.


- Also have the tank for sale, some surface rust on the top, but still very nice, and not dented at all. Never seen a winter and about as nice as it will get without being new.

Not exactly sure what its worth so I'll say $100


- Had this sitting in a box for a year, forgot i even had it. Worked fine when removed reads up to 40 psi hass wiring for the light, and the fitting for the vac line. Only need screws or clips to hold it in place. Comes with the pod

I'll let it go for $30

If there any interior parts, or random brackets let me know, i still have everything i have pulled from the car for the most part

-a/c pump
-abs pump
-SMIC's and piping w/ aluminum y-pipe
-all electronics
-speakers
-sun roof cover
-mint charcoal dash
-seats
-seat belts front and rear
- and a whole bunch more

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs441.ash1/24329_1407774442668_1481643354_31069188_1817658_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs421.snc3/24329_1407772042608_1481643354_31069177_3762470_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs421.snc3/24329_1407773202637_1481643354_31069180_388178_n.j pg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs421.snc3/24329_1407773442643_1481643354_31069181_4777584_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs401.snc3/24329_1407773682649_1481643354_31069183_7935297_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs421.snc3/24329_1407774242663_1481643354_31069187_2438359_n. jpg

Just make an offer, i'll let it go really cheap just to clear up some space.

Also if you want some new parts for install, I can cut you a deal on that to.

Paypal is Thebird65@aol.com

-Austin@STM

[NeedmorboosT]

how much for the the chrome y-pipe, where is it from ? shipped to 78574

[ukyo]

How much for the rear speaker covers (both sides)? Are they charcoal gray? Also, what kind of shape are your door panels in? Any bubbling or rips?

[Austin@STM]

Needmorboost- im not sure the brand it was on the car when I bought it. I believe its just a cheap one but it works. Pressure tested to 25psi i'll take $25 shipped for it, or if you want a new throttle body coupler and t-bolts with it, i'll take $50 shipped.

Ukyo- your talking about just the grills right? They are charcoal, make me an offer on them.
The door panels are charcoal with tan insert the are bubbled on the armrest but otherwise no rips that I can think of, I remember them being very clean. Make an offer on those as well if your interested.

[NeedmorboosT]

Needmorboost- im not sure the brand it was on the car when I bought it. I believe its just a cheap one but it works. Pressure tested to 25psi i'll take $25 shipped for it, or if you want a new throttle body coupler and t-bolts with it, i'll take $50 shipped.

Ukyo- your talking about just the grills right? They are charcoal, make me an offer on them.
The door panels are charcoal with tan insert the are bubbled on the armrest but otherwise no rips that I can think of, I remember them being very clean. Make an offer on those as well if your interested.

how about if i just take y-pipe and t-bolts and couplers? i have no use for the throttle body or i would take it.

[Austin@STM]

That's what I meant, throttle body coupler, not throttle body. Paypal is at the bottom of the first post, I can send it out Monday afternoon.

[NeedmorboosT]

That's what I meant, throttle body coupler, not throttle body. Paypal is at the bottom of the first post, I can send it out Monday afternoon.

my apologies, read to quick and didnt think before posting again. thanks

[ukyo]

Ukyo- your talking about just the grills right? They are charcoal, make me an offer on them.
The door panels are charcoal with tan insert the are bubbled on the armrest but otherwise no rips that I can think of, I remember them being very clean. Make an offer on those as well if your interested.

Not just the grills, the whole speaker cover panel (grill and all). That is, assuming they aren't torn or bubbled. As for the door panel, mine are bubbled too, so that is what I'm looking to get rid of. :(

If the rear speaker cover panels are good, I'm still interested. Let me know. Thanks.

[Austin@STM]

Ok I will check out the panels when I get home.

[MADMarc]

Oooo, goodies :P What's the condition of the center console storage box and also the center console trim piece dealio (hang in there w/my lingo) that goes from the storage box to the bottom of the radio? Any tears, cracks, warping?

[Austin@STM]

Oooo, goodies :P What's the condition of the center console storage box and also the center console trim piece dealio (hang in there w/my lingo) that goes from the storage box to the bottom of the radio? Any tears, cracks, warping?

http://l19.sphotos.l3.fbcdn.net/hphotos-l3-ash1/hs749.ash1/164016_1784406338230_1481643354_31957864_4373068_n .jpg

I assume you mean these 2 pieces? If so they appear to be in good condition still, no rips, and the lid still has a good hinge.

Make me an offer.

Ukyo - The speaker panels are bubbled a little on the arm rest, but otherwise all there, no rips or stains. Also the grills thenselves dont have fabric on them anymore, i forgot i ripped it a while ago when i still had an interior.

If your want them make an offer, i doint expect much since they arent perfect, pretty much just cover shipping i guess.

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1360.snc4/163263_1784405938220_1481643354_31957862_8043490_n .jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs794.ash1/168489_1784405498209_1481643354_31957860_5123208_n .jpg

[blackrob]

Hey man, do you still have the sunroof cover? If so, what condition is it in? Also, how much shipped to 27616?

[DrGonzo]

Austin- What condition are the door panels in and how much shipped to 27520.

[HLxDrummer]

Rear seat belts? I actually just want the plastic covers if you'd be willing to cut the belt for me.

[Austin@STM]

Rear seat belts? I actually just want the plastic covers if you'd be willing to cut the belt for me.

How do you plan on getting them on your belts? or are you just using them for covers?

drgonzo - they are a bubbled in the armrest area but other than taht fairly clean. They have a tan leather insert. I can get some pics in the morning.

[DrGonzo]

Don't worry about the pics. I am looking to replace the damaged/bubbled ones I have right now. Thanks though!

[HLxDrummer]

How do you plan on getting them on your belts? or are you just using them for covers?

drgonzo - they are a bubbled in the armrest area but other than taht fairly clean. They have a tan leather insert. I can get some pics in the morning.

I'm just using them for covers - I'm getting rid of the seats/belts but keeping the panels.

[Austin@STM]

Hey man, do you still have the sunroof cover? If so, what condition is it in? Also, how much shipped to 27616?

Its not to bad, could use a good cleaning, but no rips or tears, and all the clips are still there as far as i can tell. Make an offer on it I know they cost 300 new but i dont expect anywhere close to that.

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1375.snc4/164737_1786120181075_1481643354_31961822_536597_n. jpg

HLxDrummer - I found the seat belts, i got no problem cutting them up if you want. They have a few scuffs on them from being packed in a box, but they should clean up decent. Name your price on them.
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs780.ash1/167031_1786118381030_1481643354_31961809_90286_n.j pg

[HLxDrummer]

They look decent to me, but I have no clue for a price. What do you think, $10-15?

[Austin@STM]

If you want me to cut the belts, and ship just the cover i can do $15.

-Austin@STM

[HLxDrummer]

If you want me to cut the belts, and ship just the cover i can do $15.

-Austin@STM

$15 for both covers, right? What's your paypal?

[Austin@STM]

ya works for me, i'll send them out tomorrow.

paypal - thebird65@aol.com
note - rear seat belt covers

[HLxDrummer]

Thanks man, sent it!

[blackrob]

Its not to bad, could use a good cleaning, but no rips or tears, and all the clips are still there as far as i can tell. Make an offer on it I know they cost 300 new but i dont expect anywhere close to that.


I hope I don't offend you, but how's $75 + shipping? I have no idea how much shipping would be. I'm going to guess around $15-25 though. Or we could say, $100 shipped???

[Austin@STM]

I hope I don't offend you, but how's $75 + shipping? I have no idea how much shipping would be. I'm going to guess around $15-25 though. Or we could say, $100 shipped???

No offense taken, that works for me i'll put plenty off packing in there so it will probably cost at least 20 to ship so $100 is fair.

Paypal is - thebird65@aol.com
note - blackrob sunroof cover

thanks
-Austin@STM

[blackrob]

Thanks for the sunroof cover. I'm excited because that is one of the last pieces missing from my car. The very last piece is one of the pop-out panels in the trunk. I went back through your pics and noticed you had some. Do you have the whole set? If so, would you be willing to split it up and sell me one piece? I only need the one on the end of the driver's side. Number 2629 if you look at it on 3SX's site. Could you throw that in there with the cover for $8 if you have it? Thanks again for the great deal on the cover.

3SX pop-out panel (http://www.3sx.com/store/comersus_viewItemBundle.asp?idProduct=28281)

[Austin@STM]

Sunroof cover and rear seatbelts sold and shipped.

-Austin@STM

[zapman2000]

do you have the Back Cover Pane for the sun roof handle it looks like this and if so how much?
http://img824.imageshack.us/img824/2418/97354327.jpg

[Austin@STM]

I'll look for that when i get home.

[bluzvr4]

did this car have the full sunroof? i need a new sunroof crank assembly or just the sunroof handle

[Austin@STM]

The car does have a sunroof but its still in there right now so i still need the handle, at least for now.

I also forget his before but i have a green hood and hatch for sale as well, both came off my car.

-Austin@STM

[blackrob]

Hey man, I received the cover today and i really appreciate the way you packed/shipped it. It arrived in pristine condition. I installed it straight away, ant it looks great! Thanks again, and what a great transaction.

[Austin@STM]

Hey man, I received the cover today and i really appreciate the way you packed/shipped it. It arrived in pristine condition. I installed it straight away, ant it looks great! Thanks again, and what a great transaction.

Glad you like it.

found these in my room today as well if anyone needs a set. Good front ECS strut caps
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs895.ash1/180300_1794036378975_1481643354_31975566_4426725_n .jpg

Also still have the y-pipe for sale.

-Austin@STM

[ukyo]

Ukyo - The speaker panels are bubbled a little on the arm rest, but otherwise all there, no rips or stains. Also the grills thenselves dont have fabric on them anymore, i forgot i ripped it a while ago when i still had an interior.

If your want them make an offer, i doint expect much since they arent perfect, pretty much just cover shipping i guess.

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs1360.snc4/163263_1784405938220_1481643354_31957862_8043490_n .jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs794.ash1/168489_1784405498209_1481643354_31957860_5123208_n .jpg

They are better than what I have. Get me a price for shipping and I'll take them. Just let me know. Thank you!

This will finally give me an excuse to program the remote I have for the doors. I've had it for a few years now. :lol:

[Austin@STM]

Make me an offer, what are they worth to you?

[Austin@STM]

fuel pump sold.

[Beef6]

Do you still have the stock ac radiator fan? (The Slim one)

[Austin@STM]

Do you still have the stock ac radiator fan? (The Slim one)

PM sent

[93SlugTT]

Both door panels, only if they are in near mint shape

[Austin@STM]

Both door panels, only if they are in near mint shape

Besides the bubbling they are mint :p

They look good but they are bubbled up, no stains or rips, or anything, but deff bubbled.

[Austin@STM]

a/c fan sold.

-Austin

[Austin@STM]

SMIC's and piping sold, and in case i forgot to mention it all trunk plastics and spare tire cover sold.

[Booste]

hey on the first page you said you had some kind of gauge that you had and you said it came with the pod, but there was no pictures. whats the gauge?

[Austin@STM]

Boost guage

[Booste]

is the pod just a single pod?

[Austin@STM]

ya, i'll grab a pic when i get to the shop

[elyria_boy]

what kind of condition are front seats in? if they are looking pretty mint do you think it would be possible to take the leather/material off the foam and mounting?? ive never tried to do that but man it would sure save on shipping! lol. however i imagine that wouldn't be fun to take them off. how bout a picture of them?

[Austin@STM]

They are a little dirty, I also threw the driver seat in the dumpster already to get it out of the way.

If they were good I would have been fine with that though, taking the covers off isn't to horrible.

[elyria_boy]

thats fine, my passenger seat is the one that is pooped. dirty is fine, will match my interior juuuust fine. so you still have pass. seat intact, any rips, tares, anything that would not allow it to be pealed off and stretched back on a different seat?

[Austin@STM]

i dont think its to bad, i'll grab some pics this weekend. I have to dig it out of my basement.

[Petertit]

Austin, I'll take the Y pipe and throttle body adapter with the t bolt clamps if you still have them. Let me know please.

[elyria_boy]

i dont think its to bad, i'll grab some pics this weekend. I have to dig it out of my basement.

ok, sounds good. whenever it is convenient for ya is fine with me. pm me with pics or here, either way.

[1gRick]

First up is my stock turbos, they have been great to me for the 2 years i've owned the car. They now have 80k on them and are still nearly perfect! This is the first time they have been off of the car.

As most of you know these turbo have been pushed to the max, i raced with them several times in the time i have had the car, and never once had an issue with them.
On the dyno they squeezed out 23psi and on the track ran a consistent 19psi every single pass. Never a puff of smoke and the intercooler piping doesnt have a spot of oil in it.

I'll start at $350 for them, still bolted to the headers so no broken bolts:D
- also all lines are still attached and ready to bolt right in.

http://sphotos.ak.fbcdn.net/hphotos-ak-snc6/hs261.snc6/178980_1783497755516_1481643354_31955656_2589604_n .jpg


- Next up is a great condition fuel sender, all the connections are good, the feed line is just barely rounded, but still very usable. There is just a little bit of surface rust but otherwise mint.

$100 for just the sender, or $150 with the walbro 255 in it.

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs782.ash1/167233_1783498075524_1481643354_31955658_6651825_n .jpg


- I have a used walbro as mentioned above, couple years old, but no issues ran great pressure, and wasnt run dry.

I'll take 60 for it, unless it sells with the sender.


- Also have the tank for sale, some surface rust on the top, but still very nice, and not dented at all. Never seen a winter and about as nice as it will get without being new.

Not exactly sure what its worth so I'll say $100


- Had this sitting in a box for a year, forgot i even had it. Worked fine when removed reads up to 40 psi hass wiring for the light, and the fitting for the vac line. Only need screws or clips to hold it in place. Comes with the pod

I'll let it go for $30

If there any interior parts, or random brackets let me know, i still have everything i have pulled from the car for the most part

-a/c pump
-abs pump
-SMIC's and piping w/ aluminum y-pipe
-all electronics
-speakers
-sun roof cover
-mint charcoal dash
-seats
-seat belts front and rear
- and a whole bunch more

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs441.ash1/24329_1407774442668_1481643354_31069188_1817658_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs421.snc3/24329_1407772042608_1481643354_31069177_3762470_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs421.snc3/24329_1407773202637_1481643354_31069180_388178_n.j pg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs421.snc3/24329_1407773442643_1481643354_31069181_4777584_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs401.snc3/24329_1407773682649_1481643354_31069183_7935297_n. jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs421.snc3/24329_1407774242663_1481643354_31069187_2438359_n. jpg

Just make an offer, i'll let it go really cheap just to clear up some space.

Also if you want some new parts for install, I can cut you a deal on that to.

Paypal is Thebird65@aol.com

-Austin@STM

Amazing how long the the stock turbos last. Certainly a testament to Mitsubishi engineering . GLWS

[Austin@STM]

They did great. 21psi on 9bs for a season after 60k miles already I think they are as good as it gets. They still felt like new and probably got another 60k in them.

[My92Stealth]

Do you, by chance, have the rear interior pillar covers? The ones that surround the rear 1/4 window.

[Austin@STM]

Yes I should still have those pieces, I will look tonight. I have to get some pics of the passenger seat as well while in in my mini scrap yard

[elyria_boy]

any update on the passenger seat condition? =)

[peterkottemann]

Are the parts first or second gen? I need a MFI relay and an ignition coil if you have spares of those two.

[coldkill08blaze]

I don't feel like reading all 6 pages on this to see what is gone lol... Are those both front white leather seats? If so, how much? Got any pics of them?
Also, do you have the automatic digital climate control? My screen burnt out like a year ago lol

[GRSHOPR]

Austin, I'm looking for a fuel sending unit and gas tank here in the near future. How much for both and where are you?

Edit: Also need a rheostat cluster and digital climate control wiring harnesses immediately if you have them.

[Chris GTO TT]

do you know if you still have the Active exhaust switch and the housing for it?