PDA

View Full Version : **GZP Front and Side Mount Oil Cooler Kits**



Hans@GZP
01-12-2011, 12:43 AM
Links to our oil cooler kits on Ebay. All kits now come with black AN fittings. Blue/Red are available upon request.

Front Mounted Oil Cooler
http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=140712996202&ssPageName=STRK:MESE:IT#ht_2697wt_950

Blacked Out Front Mounted Oil Cooler
http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=140712999253&ssPageName=STRK:MESE:IT#ht_2725wt_950

Side Mounted Oil Cooler
http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=140790099180&ssPageName=STRK:MESE:IT#ht_2058wt_1037

We are now producing front and side mount oil cooler kits for your 3000GT/Stealth. The cores used are 2 inches thick... WAY thicker than the stock one.

The front mounted oil cooler kit includes a 19 row oil cooler w/brackets and all of the lines and fittings required for installation.

The side mounted oil cooler kit includes a 10 row oil cooler w/brackets and all of the lines and fittings required for installation.

Here is a link to purchase the front mounted oil cooler http://www.3swarehouse.com/index.php?option=com_virtuemart&page=shop.product_details&flypage=flypage.tpl&product_id=498&Itemid=1

Here are some pics of the front mounted oil cooler kit.

http://i34.photobucket.com/albums/d111/3Scar/Oil%20Coolers/IMG_5314.jpg

http://i34.photobucket.com/albums/d111/3Scar/Oil%20Coolers/IMG_5318.jpg

http://i34.photobucket.com/albums/d111/3Scar/Oil%20Coolers/IMG_5317.jpg

http://i34.photobucket.com/albums/d111/3Scar/Oil%20Coolers/IMG_5308.jpg

VR4Drive92
01-12-2011, 12:52 AM
Looks good!

Stealthlabel
01-12-2011, 01:06 AM
cant wait for a $$

lowflyer
01-12-2011, 01:10 AM
We are now producing front and side mount oil cooler kits for your 3000GT/Stealth. The cores used are 2 inches thick... WAY thicker than the stock one.

The front mounted oil cooler kit includes a 19 row oil cooler w/brackets and all of the lines and fittings required for installation.

The side mounted oil cooler kit includes a 10 row oil cooler w/brackets and all of the lines and fittings required for installation.

WANT.

Hypothetical BJP are forthcoming.

Emilie@GZP
01-12-2011, 12:48 PM
BJP? :confused:

Emilie@GZP
01-12-2011, 04:51 PM
Front Mount Oil Cooler Kits:

http://www.3swarehouse.com/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=498&category_id=190&option=com_virtuemart&Itemid=1

green-lantern
01-12-2011, 06:14 PM
So the side mounted ones are almost half the size of a front mounted one?

Emilie@GZP
01-12-2011, 06:24 PM
the sidemounted oil cooler is one row less than stock, but about twice as thick.

http://i34.photobucket.com/albums/d111/3Scar/Oil%20Coolers/IMG_5349.jpg

http://i34.photobucket.com/albums/d111/3Scar/Oil%20Coolers/IMG_5350.jpg

http://i34.photobucket.com/albums/d111/3Scar/Oil%20Coolers/IMG_5351.jpg?t=1294871033

Emilie@GZP
01-12-2011, 06:26 PM
I can take pictures in reference to a stock oil cooler, if you would like.

green-lantern
01-12-2011, 07:12 PM
I can take pictures in reference to a stock oil cooler, if you would like.

That would be awesome thanks!

Emilie@GZP
01-12-2011, 07:28 PM
give me a bit, I'll dig one up and clean it off, and take some reference pictures :)

green-lantern
01-12-2011, 07:34 PM
Cool no hurry

mh3kgt
01-12-2011, 08:12 PM
FYI anyone wondering, the 19row cooler WILL fit in the stock SMOC location, so you're not limited to the 10row for sidemount location...giving you angle it correctly and use a few self tappers. I have a 19row cooler exactly like this one and it fits with my CXracing FMIC to boot! If anyone wants some pics of how mine is mounted I can snap a few and post them up.

*EDIT* Looks like a great product and price BTW, you guys at GZP really have been busy lately, I'm loving all the new innovative products coming out now. It's even more exciting to be a 3s owner now with all the progress this platform is making recently

Emilie@GZP
01-12-2011, 08:59 PM
Try to keep in mind that the bolts on the stock oil cooler make it look taller than it actually is :p

Front Mount VS Stock
Front Mount is the same height as the stock oil cooler core, 1" wider, and 3/4" thicker

http://i34.photobucket.com/albums/d111/3Scar/IMG_5356.jpg
http://i34.photobucket.com/albums/d111/3Scar/IMG_5357.jpg

Side Mount VS Stock
7/8" shorter than stock, 3/4" thicker, same width

http://i34.photobucket.com/albums/d111/3Scar/IMG_5358.jpg
http://i34.photobucket.com/albums/d111/3Scar/IMG_5361.jpg


We are looking into a larger core for the side mounted application, since it seems some may be concerned with the cooling abilities. We want to retain the vertical mounting, so, size is a bit more of a limiting factor in the sidemount application as opposed to the front mount application.

We CAN offer a dual sidemount oil cooler kit for anyone interested. That would be a special-order item. If anyone is interested, please PM either Hans@GZP or myself, and we will get a pricing quote for you.

Atrosity
01-13-2011, 12:32 PM
Just purchased my oil cooler kit.

MR2
01-15-2011, 05:19 AM
for those mounting the braided lines, they should be careful to tie them away from other critical stuff as braid acts like a hacksaw when it rubs against other things.

Nytron
01-15-2011, 08:46 PM
Great looking kit. I was wondering if there would be any downsides to mounting this upside down? The oil should flow fine right?

Emilie@GZP
01-15-2011, 08:58 PM
why would you mount it upside down? :confused:

Nytron
01-15-2011, 10:11 PM
why would you mount it upside down? :confused:
Stealth 316 - Front-mount oil cooler (http://www.stealth316.com/2-fmoc.htm)

I have a similar kit with a 19 row core and had to mount it upside down in the stock location because of clearance issues.

Hans@GZP
01-15-2011, 10:30 PM
We've never had a need to run one upside down, so I couldn't comment on that.

Hans@GZP
01-15-2011, 10:31 PM
for those mounting the braided lines, they should be careful to tie them away from other critical stuff as braid acts like a hacksaw when it rubs against other things.

The kits will come with insulated covers for the braided hoses where they come in contact with other parts of the car.

Hans@GZP
01-19-2011, 03:56 PM
http://i34.photobucket.com/albums/d111/3Scar/Customer%20Cars/Ben%20Heuser/IMG_5411.jpg

That's what it looks like mounted up with are mounting bracket. We are working on a slightly less expensive way of having the kits done as well. There will be an option for a different style hose to be used which could drop the kit price down about $20. It would have a nylon cover on the hose, so there is no need to have protective coverings on the hose like you would need on the SS braided ones. I will have those finalized next week along with a larger side mount oil cooler.

MR2
01-19-2011, 05:05 PM
I was going to suggest this..but diden't want to rain on your party.

Stainless braided is way over rated and far heavier than needed for 99% of the stuff people do on cars.

Earls Pro-line 350 is what I used...light, cheap, fantastic :)

http://www.earls.com.au/files/496436f783d69-HOSEPROLITE350.pdf

Hans@GZP
01-19-2011, 05:33 PM
Here are some pics of our finished side mounted oil cooler. The larger core option will be available next week.

http://i34.photobucket.com/albums/d111/3Scar/Oil%20Coolers/IMG_5419.jpg

http://i34.photobucket.com/albums/d111/3Scar/Oil%20Coolers/IMG_5418.jpg

http://i34.photobucket.com/albums/d111/3Scar/Oil%20Coolers/IMG_5417.jpg

http://i34.photobucket.com/albums/d111/3Scar/Oil%20Coolers/IMG_5416.jpg

http://i34.photobucket.com/albums/d111/3Scar/Oil%20Coolers/IMG_5415.jpg

3000vr4kyspyder
01-19-2011, 06:52 PM
Man! That is one dead sexy car that your awesome kit is mounted to! That guy must be super lucky to have that car and that cooler set up! :)

green-lantern
01-19-2011, 07:10 PM
The kits look really nice guys, Looking forward to seeing the bigger option. Looks like if it was leaned back you could fit a bigger one in there. I think I had to lean my stock one because of my intercooler piping.

mh3kgt
01-19-2011, 07:21 PM
Yes, I know for a fact that you can fit a 19row oil cooler in the stock location with cxracing fmic kit. I have it on mine, just have to angle the core a bit.

Hans@GZP
01-19-2011, 08:26 PM
I ordered up a 16 row oil cooler to fit into that spot. I didn't want it to lean back too far. It will have over twice the cooling capacity as the stock one.

MR2
01-19-2011, 08:34 PM
you know....if you baffle the Oil cooler correctly (think of the origional SMIC shrouding) you could put it as slanted as you want...and if you put that second turbo pipe at the same angle as the first then you could mount a massive oil cooler, and with your shrouding being right you could mount a very thick one and still get great air flow.

could... if you wanted....

IPD
01-19-2011, 09:14 PM
not really interested in slanting any intercooler. i'm interested in what's the biggest honking oil cooler i can fit in that spot; assuming that i'm using an FMIC and the piping is hidden behind the bumper (not poking out the side inlets of the bumper). specifically with regards to a 97-98 bumper.

if it's dual-core, (or two cores in series, etc) that's ok too. and i'm interested in one for the passenger side too; because i plan to use an identical setup to cool the trans.

subscribed so i can see pics when i get off work.

Hans@GZP
01-19-2011, 10:46 PM
not really interested in slanting any intercooler. i'm interested in what's the biggest honking oil cooler i can fit in that spot; assuming that i'm using an FMIC and the piping is hidden behind the bumper (not poking out the side inlets of the bumper). specifically with regards to a 97-98 bumper.

if it's dual-core, (or two cores in series, etc) that's ok too. and i'm interested in one for the passenger side too; because i plan to use an identical setup to cool the trans.

subscribed so i can see pics when i get off work.

I'll be working on one for the auto trans in the next few weeks.

Hans@GZP
01-19-2011, 10:46 PM
you know....if you baffle the Oil cooler correctly (think of the origional SMIC shrouding) you could put it as slanted as you want...and if you put that second turbo pipe at the same angle as the first then you could mount a massive oil cooler, and with your shrouding being right you could mount a very thick one and still get great air flow.

could... if you wanted....

Ya could, but if I had to sell it... it would be too expensive LOL

IPD
01-19-2011, 10:48 PM
awesome! can't wait to see it!

i've always thought.... "three openings, three intercoolers. coincidence, i think not." :D

MR2
01-19-2011, 11:50 PM
I'm not talking about slanting the intercooler, I'm talking about slanting the oil cooler, then baffling around it so that the air has no choice but to go through it no matter what angle it is...which will allow you to put in the largest oil cooler possible.

IPD
01-19-2011, 11:53 PM
I'm not talking about slanting the intercooler, I'm talking about slanting the oil cooler, then baffling around it so that the air has no choice but to go through it no matter what angle it is...which will allow you to put in the largest oil cooler possible.

i know what you meant. i also know that even with perfectly constructed baffles, airflow will be less rapid through a slanted application than through a normal one.

p.s.

an oil cooler is an intercooler. so is a tranny cooler. so is a radiator.

Atrosity
01-20-2011, 03:23 PM
Seeing a fully installed picture, makes me can't wait to get my kit!!

Atrosity
01-20-2011, 03:27 PM
Wouldn't having an oil cooler kit upside down cause oil starvation?

jbuhrman
01-20-2011, 07:50 PM
Wouldn't having an oil cooler kit upside down cause oil starvation?

No, as the cooler is straight off the pump, the only thing I would be worried about is the back flow after shutting the car off, I doubt its even a true issue though.

Hans@GZP
02-06-2011, 07:30 PM
I added a link to the first post for where it can be purchased directly from out site.

vroom4
02-07-2011, 10:49 AM
Ok hans.i want my oil cooler by next friday. If it isnt at my house, ill take 200 to my paypal. This is fucking rediculous. I will not be purchasing a god damn thing from you again.

Atrosity
02-08-2011, 05:22 AM
My kit was shipped out to me yesterday, everything seemed to be on back order.

The items had to have been shipped to hans then it had to have been shipped out.

vroom4
02-08-2011, 08:25 AM
My kit was shipped out to me yesterday, everything seemed to be on back order.

The items had to have been shipped to hans then it had to have been shipped out.

Get real.

Hans@GZP
02-08-2011, 09:28 AM
Eric, Garrett (vroom4) is a special exemption. I was supposed to give him the prototype (which was supposed to be done a while ago).

And surprisingly shipping was the same amount to go to his address in PA as it was for your address in CA. Weird LOL.

Atrosity
02-16-2011, 03:52 AM
No issues so far, mine bolted up EZ PZ with excellent fitment. I will be sure to post a review after i get the car started with oil pressure readings.

http://i52.photobucket.com/albums/g19/Atr0sity/f6946152.jpg
http://i52.photobucket.com/albums/g19/Atr0sity/c8a57b5c.jpg

gltasn
02-17-2011, 05:45 PM
when will someone invent an oil cooler with a drain plug?

MR2
02-17-2011, 05:48 PM
install it inverted?

20G_VR4
02-21-2011, 11:45 AM
Is the side mount kit $225 as well?

Emilie@GZP
02-21-2011, 01:18 PM
Is the side mount kit $225 as well?

I thought we had included the pricing for the SMOC. $200 for the side mounted kits. :)

Atrosity
02-21-2011, 04:31 PM
This kit was really easy to install and no leaks!

http://i52.photobucket.com/albums/g19/Atr0sity/22db0b9e.jpg
Took this snap shot!

http://i52.photobucket.com/albums/g19/Atr0sity/e6edc020.jpg
My oil pressure used to read 8 psi now it reads 15 all the time at idle.

vroom4
02-21-2011, 06:12 PM
Im curious what caused a 7 psi increase in pressure....?

vroom4
02-21-2011, 07:27 PM
In my eyes, if your idle oil pressure did go up, its a false sense of "better" and if anything is restricting volume flow rate.

Atrosity
02-21-2011, 10:08 PM
I am not sure what caused it to go up, The only thing i can think of is leaky oil lines...

Chris@Rvengeperformance
02-22-2011, 02:52 PM
I am not sure what caused it to go up, The only thing i can think of is leaky oil lines...

damn man if I ever saw 8 PSI I'd have the oil pan off that day.

mh3kgt
02-22-2011, 02:54 PM
Ya 8psi scares me lol I'm scared when mine hovers around 12-15psi

Chris@Rvengeperformance
02-22-2011, 02:57 PM
Ya 8psi scares me lol I'm scared when mine hovers around 12-15psi

yeah I would too. You guys need to put some new bearings and oil pump in if you haven't Mine used to be 12 too, but has been running 20 PSI at 850 RPM now for 4 years.

mh3kgt
02-22-2011, 03:00 PM
I think mine is actually about 15-20psi when warm. I just have a cheap Glowshift gauge tho, so who knows how accurate it really is. Engine is new build with ~1k miles so far. I had Donniekak build it for me.

Atrosity
02-22-2011, 03:07 PM
My car is getting new paint and 99 converted then after that I will be saving up to take the oil pan off for a new pump and bearings. I barely drive the car so It'll sit for a little bit until this issue is fixed. :P

Chris@Rvengeperformance
02-22-2011, 03:54 PM
good plan

Atrosity
02-24-2011, 03:06 AM
Raised my idle to 800-850 and now my oil pressure is consistently reading 18-20 psi and after numerous of wot pull 15-17 psi after boosting.

94GTOTTM
03-03-2011, 12:41 PM
Does this kit come with the adapter to the oil filter housing for the lines? I know when tu buy this kit from other places its a separate purchase. Is there anyway this kit will bolt to the stock location instead of pushing it to the passenger side?

Atrosity
03-03-2011, 01:18 PM
Does this kit come with the adapter to the oil filter housing for the lines? I know when tu buy this kit from other places its a separate purchase. Is there anyway this kit will bolt to the stock location instead of pushing it to the passenger side?

Mine came with everything you need, the install was stupidly easy and after installed I had no leaks.

Emilie@GZP
03-03-2011, 01:23 PM
Does this kit come with the adapter to the oil filter housing for the lines? I know when tu buy this kit from other places its a separate purchase. Is there anyway this kit will bolt to the stock location instead of pushing it to the passenger side?

We have a side mounted option, it bolts into the stock location.