PDA

View Full Version : How do I polish by the letters on valve cover



arthur92710
01-09-2011, 12:17 AM
Im having trouble polishing around and in the spaces in the letters on the valve cover.
I have tried folding up a piece of sandpaper but it takes ALOT of work on the big 'V6', not to mention the smaller letters. Are there any tools that I can use to do this?

I managed to sand out that 'color' between the letters but it does not sand easily.
http://lh4.ggpht.com/_VddeTFeWEak/TSk3miFk16I/AAAAAAAAB4U/6ocWqqtgiaU/s640/P1230778.JPG

I have sanded about half with 180 so far(not shown in this pic), next I will use 220, 320, and then 400.

stealthee
01-09-2011, 01:10 AM
You need a dremel with a bunch of different sanding disks.

arthur92710
01-09-2011, 11:35 AM
These?
http://www.fandfwoodcarving.com/images/pwr-sa16.jpg
or these?
http://ecx.images-amazon.com/images/I/41CMR2YABCL.jpg

Emilie@GZP
01-09-2011, 11:39 AM
they make REALLY small ones. I beleive you can get them at home depot, in the power tool isle.

stealthee
01-09-2011, 12:21 PM
There are tons of different shaped bits for a dremel.

Amphiron
01-09-2011, 02:13 PM
Be careful when sanding the letters with a Dremel, its easy to sand start to take off too much metal and round the edges of them.

dbest671
01-09-2011, 02:31 PM
Now you know why most people shave the lettering off. I bought a porter cable profile sander, but I used to do a lot of polishing. It came will little attachments, and one was like a wedge. It worked great using it by hand. I would have said to do around the lettering first, that way you knew how much metal you were taking off. Be careful, like Amphiron said, it is very easy to take off too much metal, and then it will look uneven when polished, like there are little valleys between the lettering.

Profile sander Porter Cable - eBay (item 190426851878 end time Jan-30-11 10:18:12 PST) (http://cgi.ebay.com/Profile-sander-Porter-Cable-/190426851878?pt=Sanders_Sandblasters&hash=item2c56532a26)

PORTER CABLE 14471 30 DEGREE ANGLE PROFILE SANDING HEAD - eBay (item 370469316333 end time Jan-23-11 09:58:29 PST) (http://cgi.ebay.com/PORTER-CABLE-14471-30-DEGREE-ANGLE-PROFILE-SANDING-HEAD-/370469316333?pt=Sanders_Sandblasters&hash=item5641b126ed)

green-lantern
01-09-2011, 03:06 PM
Im having trouble polishing around and in the spaces in the letters on the valve cover.
I have tried folding up a piece of sandpaper but it takes ALOT of work on the big 'V6', not to mention the smaller letters. Are there any tools that I can use to do this?




Ding Ding Ding!

It is a lot of work. Like April said a lot of people shave the lettering off. Just get it as good as you can. Get some finer sandpaper also. I go all the way to 2000grit. There will be spots in the corners that you don't get very well but I think that makes the letters stand out more.

IPD
01-10-2011, 03:31 AM
shaved ftw. :D

GTOJOE
01-10-2011, 04:19 AM
what about a wire brush?

3KVT
01-10-2011, 11:45 AM
have you seen the conical dremel sanding bits? I bet those would work excellently for this application.

similar to this shape, but pointed and not carbide. can't remember where I got mine, but I could ask mi padre if he recalls.

http://i1026.photobucket.com/albums/y324/MarcL_VR-4/_5-Cone-Carbide.jpg

dbest671
01-10-2011, 02:19 PM
I bought one of these at Lowes because I am polishing my driver's side motor mount, it seems to work fairly well. It is for a dremel and is equivalent to 120 grit, but they do have 220 grit. It would work great in between the Mitsubishi lettering.

https://mdm.boschwebservices.com/MDMCache/English%20%5BUS%5D/t06/0000003/r03366v3.jpg

green-lantern
01-10-2011, 02:30 PM
what about a wire brush?

You really want to stay away from wire brushes. They make scratches in the metal that you will have to sand out later.

arthur92710
01-11-2011, 03:10 AM
Which is more difficult to polish, the intake or valve cover? This VC is killing me. I have read that the intake takes 40 hours, I have probably spent that much on the VC and have just gotten to 320 grit. :( The intake looks like it would be easier, it has a smoother flow.

DanEboy5
01-11-2011, 03:09 PM
Well I am actually in the middle of polishing my parts on my R/T TT. Go to Eastwood.com and get some grinders grease and the cone shaped sanding discs. They come on 1/4" and 1/8" mandrel sets. These cut the time spent on everything. The build up is cut down by the grease. I have been polishing aluminum as a hobby for years and eastwood has the most helpful stuff out there. Doing motorcyle frames, swingarms, valve covers, etc. you need to have the right supplies.

Shaving the letters is for lazy people. Take the time and do it right...you'll thank yourself latter.

-Dan

dbest671
01-11-2011, 04:19 PM
Which is more difficult to polish, the intake or valve cover? This VC is killing me. I have read that the intake takes 40 hours, I have probably spent that much on the VC and have just gotten to 320 grit. :( The intake looks like it would be easier, it has a smoother flow.

Lets just say I rather do the plenum (intake) than a valve cover. I learned that shaving the lettering off can cause even more problems, as there are casting holes (or air pockets) that you need to fill. Eastwood is a great company. But these things are awesome Item Display Page (http://www.woodworkingshop.com/cgi-bin/89390397/mac/qryitems.mac/itemDisplay?qryType=STYLE&itemSt=CONEPOINT)
http://www.woodworkingshop.com/001c/img/cp37000.jpg

IPD
01-11-2011, 05:03 PM
Well I am actually in the middle of polishing my parts on my R/T TT. Go to Eastwood.com and get some grinders grease and the cone shaped sanding discs. They come on 1/4" and 1/8" mandrel sets. These cut the time spent on everything. The build up is cut down by the grease. I have been polishing aluminum as a hobby for years and eastwood has the most helpful stuff out there. Doing motorcyle frames, swingarms, valve covers, etc. you need to have the right supplies.

Shaving the letters is for lazy people. Take the time and do it right...you'll thank yourself latter.

-Dan

i bought a shaved plenum because it looked cleaner. same reason i'm trying to get stealth base glass, rather than r/t glass.

green-lantern
01-11-2011, 05:18 PM
Which is more difficult to polish, the intake or valve cover? This VC is killing me. I have read that the intake takes 40 hours, I have probably spent that much on the VC and have just gotten to 320 grit. :( The intake looks like it would be easier, it has a smoother flow.

I'll never do anouther plenum. lol

Those cone shaped sanders that April posted will make it easier.

green-lantern
01-11-2011, 05:20 PM
http://webspace.webring.com/people/ib/budb3/tpic/toolb/rotsnd.jpg

These little flapper wheels are awesome.

The one on the bottome

DanEboy5
01-11-2011, 05:35 PM
i bought a shaved plenum because it looked cleaner. same reason i'm trying to get stealth base glass, rather than r/t glass.

I would like to see a shaved plenum. I had thought about doing that because I never seen noe heard of it being done. That would look very clean. I am planning on painting in between the lettering to make it pop.

To the OP... keep in mind all these "other" cones from a wood shop and such will load up very quick. You can use them. Hell I use them from time to time. Just be prepared to go through a lot of them! The grinders grease with the eastwood cones are designed for less build-up and last longer and cut the matrial better. I am waiting on a new shipment from eastwood now.

arthur92710
01-11-2011, 05:44 PM
Cool, I will order some of those and tell you how it comes out.

IPD
01-11-2011, 05:54 PM
http://www.3si.org/gallery/data/500/medium/PICT0563.JPG

not the greatest of pics....i admit.

DanEboy5
01-11-2011, 05:56 PM
http://www.3si.org/gallery/data/500/medium/PICT0563.JPG

not the greatest of pics....i admit.

I thought you shaved the plenum/intake?

bslade
01-11-2011, 06:02 PM
Which is more difficult to polish, the intake or valve cover? This VC is killing me. I have read that the intake takes 40 hours, I have probably spent that much on the VC and have just gotten to 320 grit. :( The intake looks like it would be easier, it has a smoother flow.

The letters just take more patience. What is really gonna piss you off is when you go to polish the VC! All the polishing compound builds up in the letters!
I hope you are doing a TT Intake Plenum, because the NA plenum is 10 times more work than the TT......and took me 10 times longer than the valve covers.

http://members.shaw.ca/bslade/plenum.jpg

http://members.shaw.ca/bslade/vc4_sale.jpg

DanEboy5
01-11-2011, 06:12 PM
bslade, nice pieces! I may now do the plenum on my 91 R/T after seeing yours.

bslade
01-11-2011, 06:42 PM
bslade, nice pieces! I may now do the plenum on my 91 R/T after seeing yours.

I did the plenum 1st. (REALLY STUPID to start big). Took 6 weeks (1 hr or so a day) from start to finish. Learned from every mistake there was on that thing!
I can do a valve cover in one day now! I also have a huge collection of dremel drill bits (out of shear frustration).

Good luck! and be patient!

IPD
01-11-2011, 08:41 PM
I thought you shaved the plenum/intake?

no, just the valve cover, sorry, i must be on crack. i intend to shave the plenum eventually. i'll probably just get a stock one and send it off for polish/shaving. my current plenum is polished (on the top side) but it could be better.

of course, if i could find the almighty "zesty" plenum, i wouldn't even bother with the stock one.

arthur92710
01-12-2011, 12:35 AM
I hope you are doing a TT Intake Plenum, because the NA plenum is 10 times more work than the TT......and took me 10 times longer than the valve covers.

Wow, I an doing a TT, that alone makes it sound much easier. :D

arthur92710
01-13-2011, 02:09 AM
To practice polishing aluminum I decided to polish the lid to a cast aluminum pot.
Heres what it started as
http://lh4.ggpht.com/_VddeTFeWEak/TS6Tyb3A35I/AAAAAAAACT4/8rA7dA3nPEE/s640/P1230796.JPG
I cleaned it and sanded the casting lines with 80, them the rest with 180,320 and 400.
http://lh5.ggpht.com/_VddeTFeWEak/TS6T6IG2urI/AAAAAAAACT4/acgQcMzeUV0/s640/P1230805.JPG
Then I buffed it with some Tripoli
http://lh6.ggpht.com/_VddeTFeWEak/TS6UFw14H6I/AAAAAAAACT4/vzKWExhmSh4/s640/P1230811.JPG
Then white rouge.
http://lh5.ggpht.com/_VddeTFeWEak/TS6ULouYIWI/AAAAAAAACT4/F3O1oYJ9WAI/s640/P1230817.JPG
The problem is that the reflection is not too good. I will say that the sanding could have been much better, but I was in a hurry. My goal is a mirror finish and it does not satisfy me.
It is almost good but I cant get it perfect.
http://lh3.ggpht.com/_VddeTFeWEak/TS6UQcf3YGI/AAAAAAAACT4/Y_s6oT4KQO8/s640/P1230820.JPG
http://lh5.ggpht.com/_VddeTFeWEak/TS6UUudsJSI/AAAAAAAACT4/RYxpHStMiB4/s640/P1230822.JPG(I only wore gloves because it is so cold)
http://lh5.ggpht.com/_VddeTFeWEak/TS6UWZLpu3I/AAAAAAAACT4/xKiNu-RDY3w/s640/P1230824.JPGCant see my self. :(
http://lh4.ggpht.com/_VddeTFeWEak/TS6UbIdddzI/AAAAAAAACT4/04aZH4wKtpo/s640/P1230837.JPG

reallyxxxxxxloud
01-13-2011, 02:57 AM
I used a Kovax 3” Mini Dual Action Sander. Well balanced and precision-built, this powerful mini 3” D/A sander provides ultra-smooth double-action sanding from spot repairs to final finishing. Lightweight with convenient one-handed operation, perfect for all those tight places and hard to reach areas. Designed to use 3” Super-Tack mini discs (730-; 532- series).

http://www.eagleabrasives.com/images/tools/910_7501.gif

and a

http://image.ecplaza.com/offer/o/okayda3/7053441.jpg

and

http://www.mothers.com/02_products/product/images/05100-05101.jpg

Very quick = this

http://img181.imageshack.us/img181/152/dscf0020yt6.jpg

arthur92710
01-13-2011, 03:08 AM
Where do you find the mothers?

bslade
01-13-2011, 03:49 AM
What are you using for a tool to do the polishing?
High speed drill? Grinder with polishing wheel?
Surely not by hand.....

reallyxxxxxxloud
01-13-2011, 03:49 AM
I don't know I'm in Australia but any auto shop should sell it... Funny enough I even use this to resurface scratched cd's... Works really well. Doesn't take long to bring it up to a killer shine... Even though the pic looks a little dull it was quite some time after...

arthur92710
01-13-2011, 03:58 AM
I do most sanding by hand. I have a 6in bench grinder for grinding/polishing, with a wheel for each compound. I have been trying to find some grease less abrasive in stores but its not easy to find. Not in home depot, tractor supply, local hardware store, auto parts store. I will probably end up ordering it online.

bslade
01-13-2011, 11:09 AM
Looks like you didn't wait long enough on the 1st stage of polishing. Does the metal get really hot? I have to wear two pairs of gloves just to hang on to smaller pieces while polishing..........

I use Mothers Aluminum Polish to keep everything from going dull at least once a month. Almost any place that sells car polish sells it. Look in the wheel cleaners section.

arthur92710
01-13-2011, 01:17 PM
The part does not get hot. Its about 35F,(~2C) in the garage so I don't know it that will affect it.

dbest671
01-13-2011, 01:49 PM
The part does not get hot. Its about 35F,(~2C) in the garage so I don't know it that will affect it.

The polishing compounds will stick to the aluminum and leave streaks of compound.

I bought some of the greaseless compounds stuff from Eastwood (80-320 grit) and that works great for evening out the sanding marks. I use Lowe's polishing compounds (rouge) once I am done with sanding, I have 1-6, but usually stop at 4.

Greaseless Compound (http://www.eastwood.com/greaseless-compound.html)

And yes, TT plenums are A LOT easier to do that N/A plenums.

http://i392.photobucket.com/albums/pp4/hoopb23/Polished%20Plenum/DOHCManifold002.jpg
http://i392.photobucket.com/albums/pp4/hoopb23/Polished%20Plenum/TwinTurboManifold001.jpg

bslade
01-13-2011, 02:24 PM
The polishing compounds will stick to the aluminum and leave streaks of compound.

I bought some of the greaseless compounds stuff from Eastwood (80-320 grit) and that works great for evening out the sanding marks. I use Lowe's polishing compounds (rouge) once I am done with sanding, I have 1-6, but usually stop at 4.

Greaseless Compound (http://www.eastwood.com/greaseless-compound.html)


Thanks for the link/info dbest ! Now I just have to find some in Canada. They sell the same polishing 'kits' here, but I haven't seen the greaseless compound. That will save me a lot of headaches! Acetone takes off the compounds pretty easily too, but its nasty stuff.

arthur92710
01-14-2011, 01:02 AM
I found some mothers aluminum polish today and it is amazing!
http://lh3.ggpht.com/_VddeTFeWEak/TS_X2Gd_EBI/AAAAAAAACUY/L4halFc20Fw/s640/P1230849.JPG

The are some lines still visible but I will re do it after I get some greaseless.

reallyxxxxxxloud
01-14-2011, 05:44 AM
Did you d it with a little sheepskin polisher like I use. I find it works in unison quite well, very complementary.

MaxClass
01-16-2011, 01:59 PM
One thing I found that is cheap and works great to take out a lot of fine scratches are painters sanding block from Home Depot. They are about 3" x"4" x 1" and have varying fine grits available and they are made with a foam base. As such they conform beautifully to rounded and unique shapes and have sharp edges to get into tight corners. I have then in three different grits, rough, medium and fines and use them on anything I have to clean the surface up with. Works great on round rods, inside shapes, etc. Once you use them you will not want to be without them.

The fine grit will almost make aluminum shine like chrome but will still need final polishing.

Hope this helps.