View Full Version : Megan Racing/M2 turbo exhaust manifolds?
mh3kgt
12-27-2010, 05:42 PM
Anyone know anything about these? I know they're only ~$200 and you get what you pay for, but I wonder if they'd be any better than my old, stock, most-likely cracked manifolds? I've heard horror stories on how badly the OBX rear mani fits, and I wonder if these would be any better or not? Anyone running these? I know there's gotta be some other cheap bastards out there like me....
Link:90-98 Mitsubishi 3000GT VR4 Stainless Steel Exhaust Manifold - (http://www.meganracingperformance.com/9098-mitsubishi-3000gt-vr4-stainless-steel-exhaust-manifold-p-15176.html)
Chris@Rvengeperformance
12-27-2010, 06:11 PM
they all come out of the same people in china, never heard of any that didn't crack the rear one.
92pearltt
12-27-2010, 06:42 PM
If you were to buy a set and run new welds over the welds would that prevent cracking? Or is it hopeless?
Chris@Rvengeperformance
12-27-2010, 07:12 PM
If you were to buy a set and run new welds over the welds would that prevent cracking? Or is it hopeless?
I know vr3.9 has had his welded several times. The metal is really thin.
92pearltt
12-27-2010, 07:26 PM
I know vr3.9 has had his welded several times. The metal is really thin.
Figures you get what you pay for I guess.
mh3kgt
12-27-2010, 07:33 PM
:sad: I wish there were some cheaper Name Brand options out there
dsmguy27
12-27-2010, 07:50 PM
Maybe I could weld some up for you with some external wastegates on there ;)
mh3kgt
12-27-2010, 08:12 PM
Ok, but no joyriding or boosting too high testing them out :p I don't think you could handle the power compared to the DSM :o
dsmguy27
12-27-2010, 09:14 PM
Haha...we will see what you say when I get done with this hx-40 and awd swap...then we will trade rides and see what you think ;) haha. Even with two 16g's. BTW you sounded like Dad there :mitsu:
Atrosity
12-28-2010, 03:54 AM
The question is, why would you want them though? The stock ones do great.
NOMIEZVR4
12-28-2010, 12:07 PM
How are their pre-cat eliminators?? I need a set and for 89 it doesn't seem like a bad price..
Atrosity
12-28-2010, 12:10 PM
How are their pre-cat eliminators?? I need a set and for 89 it doesn't seem like a bad price..
you can always just gut them out, just grab a drill and drill it out and chizel them out too. It's a messy job but it works and saves your 89 dollars.
BjornRune
12-28-2010, 12:30 PM
Would these do any for the high-end td04 guys? Like DR750 and such? I realize the stock manifolds might outflow the td04 turbine housings anyway, so might not be much to be had in term of gains.
Chris@Rvengeperformance
12-28-2010, 12:33 PM
there is basically nothing wrong with the stock manifolds
they've made 650 AWHP or so and not reached a limit yet. The turbine is always the limiting factor in stock frame housings. You could make a little more power easier with a good front manifold, but it isn't worth the effort for these. By the time you upgrade manifolds you should be moving to a larger turbo frame size.
mh3kgt
12-28-2010, 12:55 PM
Ya I just thought it'd be nice to have a little more underhood bling :p I may look into going TD05 16g in the future anyway, so I'll most likely keep the stock manifolds on till then. I need to inspect mine for cracking tho
Atrosity
12-28-2010, 01:05 PM
Ya I just thought it'd be nice to have a little more underhood bling :p I may look into going TD05 16g in the future anyway, so I'll most likely keep the stock manifolds on till then. I need to inspect mine for cracking tho
For some under hood bling in td04s, you can always polish the front heat shield. That is some nice bling! :D
Or you can always wrap your headers. If you get td05s just wrap the headers or ceramic coat them for epicness.
mh3kgt
12-28-2010, 01:07 PM
Mmm ceramic coating :p Yeah, I think i'm gonna polish the head shields for now
dsmguy27
12-28-2010, 01:37 PM
So what about external wastegates? Not necesarily a benefit other than in high boost applications but they SOUND amazing! haha. Maybe I will fab some up and see how they work out. Then just need two 16g's!
mh3kgt
12-28-2010, 01:44 PM
Yeah external gates are pretty pointless on my tiny 15g's right now, If I ever go 16g then I'll run them
akotten
12-28-2010, 01:50 PM
Ceramic coating FTW. My stock manifolds are coated, they look very nice :)
dsmguy27
12-28-2010, 01:53 PM
Yeah external gates are pretty pointless on my tiny 15g's right now, If I ever go 16g then I'll run them
ok then I will do the tdo5 mani's...just might be awhile cuz I am going to wait a semester before taking the class...which is all good cuz it give you time to fix it right...cough....lazy....cough... ;)
mh3kgt
12-28-2010, 02:03 PM
haha have you felt how cold it is outside? Doesn't help my motivation any...
dsmguy27
12-28-2010, 02:05 PM
Yeah I sure felt it when I was on the ground under that gsx having to change the flywheel and the motor mount....it was COLD!! The only difference is that I was getting paid for it and yours you only get paid with a better running vehicle...lazy...thats the only difference haha...jk. I dont know how long its been since I have worked on Roxy and it needs work too...
mh3kgt
12-28-2010, 02:08 PM
Yeah I sure felt it when I was on the ground under that gsx having to change the flywheel and the motor mount....it was COLD!! The only difference is that I was getting paid for it and yours you only get paid with a better running vehicle...lazy...thats the only difference haha...jk. I dont know how long its been since I have worked on Roxy and it needs work too...
Yeah atleast now I may have a garage to work on it in sometimes, so I might actually get it running better and tuned before spring...maybe
dsmguy27
12-28-2010, 02:10 PM
I wont hold my breath....I'm sure you will get it done when I get done with Roxy lol
akotten
12-28-2010, 02:13 PM
How cold are we talking? Cause I've replaced my oil pan in -20* temps. Its no fun! You only have so much time to get done what you want before your fingers go numb. You can't really wear much for gloves considering you need your hands to be as small as possible when working on our cars.
mh3kgt
12-28-2010, 02:15 PM
Ya it's seen -10* here so far, but not quite -20* yet lol. I don't have anything major to do really, walbro install/hotwire, cam seal replacement, and rewire/solder in maftpro. I'm just lazy in all honesty lol. I need to hook up the laptop and learn how to even tune this maftpro, shoulda stuck with the arc2 a little longer
dsmguy27
12-28-2010, 02:15 PM
How cold are we talking? Cause I've replaced my oil pan in -20* temps. Its no fun! You only have so much time to get done what you want before your fingers go numb. You can't really wear much for gloves considering you need your hands to be as small as possible when working on our cars.
^ Show off! ;)
NOMIEZVR4
12-28-2010, 06:13 PM
you can always just gut them out, just grab a drill and drill it out and chizel them out too. It's a messy job but it works and saves your 89 dollars.
I'm not one to blow money, however I think a gutted precat vs. one of their eliminators will have a significant difference in flow..at least from the pictures it seems that way..
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.