PDA

View Full Version : How do you do the ABS delete?



Sin'sVr4
12-20-2010, 02:26 PM
Im thinking more and more about deleting my ABS and was wondering if there is a right up somewhere how to do this? I looked on stelath316 too and serached here and couldnt find anything. Anyone know or have a link? How much weight do you save doing this?

Chris@Rvengeperformance
12-20-2010, 02:48 PM
you can either by the stock non abs proportioning valve and the stock lines, bend your own lines, or go with STM's kit. I went with STM's kit because I thought it would be a nightmare to get the hardlines in with the engine in place.

No complaints so far, other than I need to do some more bleeding.

I can weight the abs pump, but it was actually a bit lighter than I hoped, I think it is only 12 or 13 lbs. I have to pull the rear panel and get the abs computer out too, that should be another 2 or 3 lbs. 20 lbs at absolute best, but I think closer to 15. It does clean the engine bay up quite a bit around the battery and air filter area.

Chris@Rvengeperformance
12-20-2010, 02:51 PM
you can either by the stock non abs proportioning valve and the stock lines, bend your own lines, or go with STM's kit. I went with STM's kit because I thought it would be a nightmare to get the hardlines in with the engine in place.

No complaints so far, other than I need to do some more bleeding.

I can weight the abs pump, but it was actually a bit lighter than I hoped, I think it is only 12 or 13 lbs. I have to pull the rear panel and get the abs computer out too, that should be another 2 or 3 lbs. 20 lbs at absolute best, but I think closer to 15. It does clean the engine bay up quite a bit around the battery and air filter area.

Sin'sVr4
12-20-2010, 05:59 PM
Forest, can I see what your bay looks like now with the lines out?

Chris@Rvengeperformance
12-20-2010, 06:00 PM
Forest, can I see what your bay looks like now with the lines out?

sure, I'll try to snap a pic tonight.

Nihil
12-20-2010, 09:16 PM
Using the stock parts is the cheapest, use a non abs prop valve (located on firewall) the lines from the prop valve to rear wheels are all the same, just the fronts are different, so you remove everything except rear lines back...part numbers are:

ABS Delete:
OEM ABS Delete Parts for reference:
MB618846 x1ea - Line from MS to PV
MB618849 x1ea - Line from MS to PV
MB618840 x1ea - Line from PV to RH
MB618843 x1ea - Line from PV to LH
MB668841 x1ea - Non- ABS Proportioning Valve

Copy and pasted from an ABS delete I've got saved on my comp :) I'd go with stock parts, for one, the price is unbeatable, the lines are like 4 bucks a piece, the prop valve can be had from a parted out car with non abs for like 20 bucks, so you can get the parts for less than 50 bucks

HLxDrummer
12-20-2010, 11:37 PM
Can those lines still be purchased new? I thought they were discontinued?

Chris@Rvengeperformance
12-20-2010, 11:40 PM
one or 2 of the master cylinder line's are discontinued. You can still get the left and right lines.

You also have to pull the steering rack to install some of them. no thanks.

HLxDrummer
12-21-2010, 12:06 AM
I'm just not real big on having that much flexible line when I could replace with hardline but it would be a PITA. I wonder if having the trans/turbos out would help any as they will be out in the future. Engine hopefully not for a while lol!

Chris@Rvengeperformance
12-21-2010, 12:17 AM
I'm just not real big on having that much flexible line when I could replace with hardline but it would be a PITA. I wonder if having the trans/turbos out would help any as they will be out in the future. Engine hopefully not for a while lol!

sure I'm with you. I have the left and right stock non abs lines on the shelf for the day when my engine blows. I don't have the patience to try to snake the hardline in with the engine in place, so this will work for now.

Nihil
12-21-2010, 12:57 AM
I do believe it's been done with the engine in place and a lot of patience, you could buy the proper tubing and rent a 45* double flare tool and make your own lines, enabling you to bend everything around obstacales easier...

NOMIEZVR4
12-21-2010, 01:00 AM
Don't even attempt to do the ABS delete with hardlines with the engine still in the bay, you're gonna hate your car..my engine is currently out so I took advantage of the opportunity

Sin'sVr4
12-21-2010, 01:37 AM
hmmm what to do....

Chris@Rvengeperformance
12-21-2010, 02:02 AM
here's some pics, don't mind the mess, needs a detailing bad:

http://www.chrisbehnken.com/Images/photos/Brakes_1/100_6477tWXG_D27b.JPG

you can notice the huge space opened up for meth tanks or whatever:

http://www.chrisbehnken.com/Images/photos/Brakes_1/100_6478PvjE_mF70.JPG

stealthII
12-21-2010, 03:24 AM
Looks good Forest.

The ABS delete is next on the list for me as well. I have all of the lines, I just don't want to do it with the engine in the car (as others mentioned).

Chris@Rvengeperformance
02-13-2012, 01:21 PM
Using the stock parts is the cheapest, use a non abs prop valve (located on firewall) the lines from the prop valve to rear wheels are all the same, just the fronts are different, so you remove everything except rear lines back...part numbers are:

ABS Delete:
OEM ABS Delete Parts for reference:
MB618846 x1ea - Line from MS to PV
MB618849 x1ea - Line from MS to PV
MB618840 x1ea - Line from PV to RH
MB618843 x1ea - Line from PV to LH
MB668841 x1ea - Non- ABS Proportioning Valve

Copy and pasted from an ABS delete I've got saved on my comp :) I'd go with stock parts, for one, the price is unbeatable, the lines are like 4 bucks a piece, the prop valve can be had from a parted out car with non abs for like 20 bucks, so you can get the parts for less than 50 bucks

OK, it may not matter to most people, but I've seen this posted a million times and it is wrong. The part # MB618846 is the line that goes from the proportioning valve to the right front (passenger) caliper, it does not go from the master cylinder to the proportioning valve.

This makes a difference because I only wanted the left and right lines from the proportioning valve to the wheel house. You can't get one of the ones from the master cylinder to the proportioning valve so I didn't order all 4. I'm keeping my stm lines from the master to the proportioning valve, but the other 2 I'm replacing with the stock hardlines while I have the engine out. This will make me able to use the stock style stainless lines from my stop tech kit and honestly I prefer the stock style arrangement because it is easy to replace just the caliper flex lines if there is a problem down the road.

I found this out using ASA and looking at the diagrams, but here is another reference:

http://www.factorychryslerparts.com/showAssembly.aspx?ukey_assembly=587130

It is part # 6.

Kx1984
02-13-2012, 02:31 PM
abs delete get from dealer 127 for everything i got it from there make sure the search the part numbers under mitsu not dodge/chrysler the numbers will not work

Kx

DrGonzo
02-13-2012, 03:12 PM
I can't imagine trying to do the ABS delete with the engine still in the car. I luckily did mine with all used OEM parts when I was building the car. It is one of my favorite nods. The brakes are Sooo much tighter and responsive now. They also seem to be much easier to bleed.

With the Engine in the car I would not hesitate going with the STM kit. Granted they are not hard lines but they are SS braided which is exactly like those braided line kits people buy to replace their stock rubber ones.

Mikes2nd
02-13-2012, 03:31 PM
OK, it may not matter to most people, but I've seen this posted a million times and it is wrong. The part # MB618846 is the line that goes from the proportioning valve to the right front (passenger) caliper, it does not go from the master cylinder to the proportioning valve.

This makes a difference because I only wanted the left and right lines from the proportioning valve to the wheel house. .

No it doesn't, but it certainly makes people think those part #'s are wrong... I had to go out and reseach to confirm! THE PART LIST IS CORRECT... :)

Thank you and have a nice day... the above list is CORRECT! THATS WHAT YOU ORDER!!... for crying out loud...

Chris@Rvengeperformance
02-13-2012, 03:33 PM
No it doesn't, but it certainly makes people think those part #'s are wrong... I had to go out and reseach to confirm! THE PART LIST IS CORRECT... :)

Thank you and have a nice day... the above list is CORRECT! THATS WHAT YOU ORDER!!... for crying out loud...

I never said the parts list is wrong, the part descriptions are wrong, which is just as bad as the parts # being wrong if you are ordering a specific part.

Rakuny
02-13-2012, 05:59 PM
I did mine with OEM parts.. it was very difficult to figure out which line went where and I was not impressed with them.. I had to re-bend the ends on more than one of them. I did mine with the engine in but rear turbo out.

B-Man
02-13-2012, 06:09 PM
Super easy to do if you're ok with running braided line.

Chris@Rvengeperformance
02-13-2012, 06:11 PM
I did mine with OEM parts.. it was very difficult to figure out which line went where and I was not impressed with them.. I had to re-bend the ends on more than one of them. I did mine with the engine in but rear turbo out.

yep, the oem stuff is bent up when you get it. I think they try to put it into smaller boxes than they should.

92RT-TT
02-13-2012, 07:44 PM
my motor is out so I'm really thinking I should do this, I've already got a non abs proportioning valve sitting around too, just need to buy the lines I guess.

Kx1984
02-13-2012, 08:00 PM
I did mine with the engine in the car but I had my rear turbo out and I removed the booster it was easy

Kx

Austin@STM
02-13-2012, 08:38 PM
Just to clear up some things. After plenty of talking with Goodridge who makes all the braided lines for us, they have assured us that running their braided line is no different than running the hard lines. Whether you are running 12 inches or 12 feet of braided line. It doesnt stretch out and lose pressure like a lot of people think would happen. We have actually run braided lines all the way to the rear calipers before with no loss of performance

Secondly the biggest problem from the kits usually come from them being hooked up wrong. If the lines are going to the wrong ports on the proportioning valve then the brakes wont work properly.

Also for anyone interested, i have been asked a few times, we can sell just the lines separately.

The best news from all of this is we also reduced the price of the kits quite a bit now, as we are able to get better pricing on everything.

-Austin@STM

familyMAN
02-13-2012, 08:44 PM
my motor is out so I'm really thinking I should do this, I've already got a non abs proportioning valve sitting around too, just need to buy the lines I guess.

Do it! BTW, I couldn't imagine doing it with motor in the car.

Besides weight reduction and cleaning up bay, you can also run the coldside piping like mine which gets rid of a couple of bends, allows more room for 3" intake pipes and it just looks better:D...
https://lh6.googleusercontent.com/-fpkzRfhhbAQ/Tv5n7oZt4OI/AAAAAAAAA5g/ICTFo3Gplbw/s912/IMG_3837.JPG

arm0red1
02-13-2012, 08:49 PM
My install kit from STM was well worth it. Cleans up the bay a decent chunk, but moreso cleans up the firewall massively. Waited awhile on goodrich for an extra banjo fitting but brian and austin @stm were great with my custom kit request, and the braided line runs all the way to the caliper and deletes the rubber sections that rot away/balloon out with fatigue over time, fringe benefit as its a slight brake upgrade for us guys that like to roadrace here in WI, and totally worth its weight in gold. Plus the flex line was was super easy to install, I wouldn't bother dicking around with anytbing else.

Rakuny
02-13-2012, 11:37 PM
Do it! BTW, I couldn't imagine doing it with motor in the car.

Besides weight reduction and cleaning up bay, you can also run the coldside piping like mine which gets rid of a couple of bends, allows more room for 3" intake pipes and it just looks better:D...
https://lh6.googleusercontent.com/-fpkzRfhhbAQ/Tv5n7oZt4OI/AAAAAAAAA5g/ICTFo3Gplbw/s912/IMG_3837.JPG


That is exactly how I want to run my pipe to the TB at some point in the future when I finally upgrade from stock SMIC's, looks awesome!

anyonebutme
02-13-2012, 11:48 PM
Little bit of info: Most open wheel race cars use all braided brake lines. As long as it's properly supported it's OK to use in any length. I suggest ADEL cushion clamps every 8" and 2 per bend.

I personally went the all OEM route for now until I run all new lines, you don't have to remove the steering rack.

Greg E
02-14-2012, 12:43 PM
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/293227_2344887262762_1267430084_2795390_4649694_n. jpg

I did mine using all OEM parts and did it with the motor still in the car. The biggest PITA wasn't the motor itself, it was snaking the lines around the damn PS rack. Total weight saving was 16lbs according to my bathroom scale.

Chris@Rvengeperformance
02-14-2012, 01:06 PM
I'm trying carefully not to knock the STM kit. I hope you guys don't take it that way. I like the kit and had zero problems with it.

When I got my stoptech brakes I had a choice to either get adapters to hookup the stm lines I have to them or install the stock lines. Since I had the engine out it was an easy choice. I know that the braided lines were fine, but what would you rather have? Braided or solid? What are the braided lines going to look like in 20 years?

Please buy the stm kit if you want to save a lot of headache and your engine is still in. There is absolutely nothing wrong with that route. I'm keeping the STM master cylinder lines.

92RT-TT
02-14-2012, 02:36 PM
I see both sides of the story, I think both are good choices depending on your needs.

I've run all braided lines before on my offroad/onroad jeeps before and never had an issue even when having to lock up 37's on the hwy due to an accident up ahead. Brakes were always nice and firm.

Austin gave me a deal so I just bought all the lines from him :).

Tigchamp
02-14-2012, 05:45 PM
I fitted the STM kit in mine with the engine out, even then I found it easier to cut the old lines out with an angle grinder. I cant imagine how it would be with the engine in.
I replaced the ABS pump with my windscreen washer bottle making even more room in the engine bay but I did need to reduce the neck to do so.
Jeff

J. Fast
02-14-2012, 06:15 PM
I'm trying carefully not to knock the STM kit. I hope you guys don't take it that way. I like the kit and had zero problems with it.

When I got my stoptech brakes I had a choice to either get adapters to hookup the stm lines I have to them or install the stock lines. Since I had the engine out it was an easy choice. I know that the braided lines were fine, but what would you rather have? Braided or solid? What are the braided lines going to look like in 20 years?

Please buy the stm kit if you want to save a lot of headache and your engine is still in. There is absolutely nothing wrong with that route. I'm keeping the STM master cylinder lines.

Be careful with that ABS delete with steet tires and your BBK. You'll definitely have more brake than grip unless you change the brake modulation or the tires. What pads are you running with your BBK?

Chris@Rvengeperformance
02-14-2012, 06:33 PM
Be careful with that ABS delete with steet tires and your BBK. You'll definitely have more brake than grip unless you change the brake modulation or the tires. What pads are you running with your BBK?

only running the stoptech pads for now.

AdamVR4
02-14-2012, 07:57 PM
Total weight saving was 16lbs according to my bathroom scale.

Honestly, was it worth it? It seems like a big mistake for those of us that aren't amazing drivers.

familyMAN
02-14-2012, 09:24 PM
Next time I have my car out, I'll do a panic stop from speed and report. I know before I pulled ABS, stopping distance was more than expected, but my pads seem to turn to jello. Still have the same pads on, so it will be a good comparison. It was worth it to me because of routing the intercooler pipe how I wanted to.

Also had a bad experience with both snow and rain (once each) with my old vr4 when I still lived in Indiana. ABS decided it didn't want me to have brakes. Very unnerving. My new cars with ABS have not had that problem and modulate correctly.

Greg E
02-14-2012, 09:28 PM
Honestly, was it worth it? It seems like a big mistake for those of us that aren't amazing drivers.

Hell yeah. No more ABS going off when braking too hard up hill. That was my main reason for ditching it.

92RT-TT
02-15-2012, 01:45 AM
In wisconsin if there is any amount of snow, even lightly hitting the brakes with abs still on the car results in it pretty much disabling the brakes and increasing stopping distance about 100 yards give or take

Nihil
02-15-2012, 01:54 AM
Hell yeah. No more ABS going off when braking too hard up hill. That was my main reason for ditching it.
Agreed, This isn't as much of a weight saver as it is a preventative abs induced accident and a small engine bay clean up.

Just curious, but has anyone removed the rest of the abs stuff, like the electrical part of it along with the sensor rings? That's a good piece of unsprung weight, I'd think? I'm sure Austin obviously has, that would save a few more pounds, not that it's a huge amount, still, but it'd be rotating and unsprung weight, so that's the most beneficial kind of weight to lose (not much, I know, but still)

Greg E
02-15-2012, 07:33 AM
Agreed, This isn't as much of a weight saver as it is a preventative abs induced accident and a small engine bay clean up.

Just curious, but has anyone removed the rest of the abs stuff, like the electrical part of it along with the sensor rings? That's a good piece of unsprung weight, I'd think? I'm sure Austin obviously has, that would save a few more pounds, not that it's a huge amount, still, but it'd be rotating and unsprung weight, so that's the most beneficial kind of weight to lose (not much, I know, but still)

The 16 pounds was also including the computer and sensors.

Greg E
02-15-2012, 07:43 AM
In wisconsin if there is any amount of snow, even lightly hitting the brakes with abs still on the car results in it pretty much disabling the brakes and increasing stopping distance about 100 yards give or take

Yeah, I don't miss those days. The first time that happened to me I pulled the abs fuse.

Most of my winter beater vehicles have not had abs. Not to sound cocky but I've put way more miles on them and can honestly say there has never been a time where abs would have been handy. Even during a panic stop.

before eliminating the abs I looked into swapping in an evolution pump and ecu. They are much smarter (and smaller) units than our cars and flashable! Unfortunately that also required wiring in a few more sensors that our cars do not have. I gave up on the project after seeing what all was involved.

a2j
02-15-2012, 09:16 AM
ABS never worked since I got my car so, here is how I did it.
without removing my engine, got factory non-abs prop valve, cut factory hard lines to appropriate length, removed unnecessary junk, sold abs pump. I spend about 6-9 months researching because messing with brakes is not joke for me. Now brakes feel better than ever. and I still did not get SS lines yet.

J. Fast
02-15-2012, 09:25 AM
Next time I have my car out, I'll do a panic stop from speed and report. I know before I pulled ABS, stopping distance was more than expected, but my pads seem to turn to jello. Still have the same pads on, so it will be a good comparison. It was worth it to me because of routing the intercooler pipe how I wanted to.

Also had a bad experience with both snow and rain (once each) with my old vr4 when I still lived in Indiana. ABS decided it didn't want me to have brakes. Very unnerving. My new cars with ABS have not had that problem and modulate correctly.

Couldn't you just relocate it it with braided lines then? Chris mentioned you can use braided lines so moving a few wires and running a few lines should be pretty simple.

I've never had an incident with my ABS deciding it didn't want me to have brakes. I have driven on ice and deployed the system and was still able to steer. It was nice to have a little more control than a full lockup and an uncontrollable slide.

Erron and I have a friend named Ray. He drives a 400hp MR2. He just upgraded his brakes with a huge BBK. The first time at the track a few weeks back he was braking deep and all day long he was bouncing off the ABS. He didn't have enough tire to stick. The nice part about it was he could still steer. A full lockup would have taken the tire contact and steering out of the equation and he would have been sliding off track or slowing down tremendously, if not... farming all day.

If the arguement is snow or ice, what do you expect? If you have the proper tire for the road surface your driving on then the ABS is a great feature. Driving on ICE... a studded snow. Driving on snow, a siped blizzak. For wet pavement, dry pavement, concrete, roadcourse track, dirt, dragstrip, etc... there's an engineered tire and brake pad combination for everything. If your abs isn't funtioning properly then it's because you weren't using the right tire or brake pad.

Moving it for space or to clean up the bay, I can understand it. It's a good feature though.

B-Man
02-15-2012, 09:35 AM
9/10 a good driver will have shorted stopping distances w/o ABS. Ask me how I know :p

Rakuny
02-15-2012, 09:49 AM
I think for a lot of us (or at least for me) it was removing an old non-working system to get rid of the rusty clutter..
I certainly didn't want to troubleshoot what part of my system wasn't working and shell out the money for those parts.. very similiar to the AWS delete in that aspect for me, IMO it just wasn't worth fixing.
I like using my palm during events to make sure I'm not getting knock, having it plugged in disables the ABS anyways.

familyMAN
02-15-2012, 12:14 PM
By the way, since this thread is about "how to" do it, I used a c3 kit. Worked great. I'm sure the STM kit is great as well.

Chris@Rvengeperformance
02-15-2012, 12:30 PM
yeah I'm not sure why every "delete" thread has to turn into an argument about why to do it or not. If you don't want to do it then don't do it.

I like others haven't had working abs since I bought the car, so why have a bunch of lines and a heavy stupid abs pump taking up space for no reason? You also have your brake pedal feel reduced by it going through the shitty abs pump.

These cars are old and complicated. I would rather reduce some functionality to have something I can depend on. I don't want to be driving someday and the internal seals decide to fail in the abs pump and get me killed.

AdamVR4
02-15-2012, 12:33 PM
yeah I'm not sure why every "delete" thread has to turn into an argument about why to do it or not.

I guess we're reading different threads because there wasn't any argument. I learned a lot. Thanks for the feedback, fellas.

anyonebutme
02-15-2012, 12:41 PM
I'll also jump in and say there are motorsports ABS systems out there that are light weight, small in size, and can be mounted anywhere needed and in any car. Most popular of these is a reflashed BMW E46 pump with the BMW Motorsports ECU (usually mounted where the passenger would sit or right behind). The ATE MK6 is an excellent 4 channel system with yaw control and requires little to be integrated and tuned for any car, also has great self testing and diagnostic modes.

Our NipponDenso 2 channel ABS sucks, IMO, on anything but smooth wet roads.

Chris@Rvengeperformance
02-15-2012, 12:45 PM
I guess we're reading different threads because there wasn't any argument. I learned a lot. Thanks for the feedback, fellas.

From the quote below:

Honestly, was it worth it? It seems like a big mistake for those of us that aren't amazing drivers.

Seems like a pretty straightforward stab at those of us that have done it, but whatever floats your boat.

B-Man
02-15-2012, 12:46 PM
Bosch 9 from a suzuki Kizashi :yum:

AdamVR4
02-15-2012, 01:23 PM
From the quote below:


Seems like a pretty straightforward stab at those of us that have done it, but whatever floats your boat.


Ah, sorry. I wrote the post in a hurry. I wasn't trying to insult anyone.

Chris@Rvengeperformance
02-15-2012, 01:28 PM
Ah, sorry. I wrote the post in a hurry. I wasn't trying to insult anyone.

no problemo. I'm not upset, I'm just used to people at work arguing with me haha. Everything seems to be an argument to me.

B-Man
02-15-2012, 01:34 PM
no problemo. I'm not upset, I'm just used to people at work arguing with me haha. Everything seems to be an argument to me.

Because everyone else on the internet is always right and you are wrong :lol: /sarcasm

BigTyla
02-15-2012, 05:48 PM
On my Talon I just cut the lines from the ABS, removed the ABS pump, and connected the lines together with flare tees, taking care to ensure I matched all the lines properly.

Lines before getting flared:

http://i7.photobucket.com/albums/y265/tylerw53/2011-10-01_12-22-14_268.jpg

Lines connected to tees:

http://i7.photobucket.com/albums/y265/tylerw53/2011-10-01_13-26-39_781.jpg

Dat engine bay space:

http://i7.photobucket.com/albums/y265/tylerw53/2011-10-01_13-28-04_9.jpg

Nihil
02-15-2012, 06:17 PM
On my Talon I just cut the lines from the ABS, removed the ABS pump, and connected the lines together with flare tees, taking care to ensure I matched all the lines properly.

Someone else did that on here, which I think is the most awesome idea since its only a couple bucks for the fittings, and makes it a lot easier to accomplish, the only down side is, you still have a million lines running through the bay, but I think the biggest advantage and reason for doing this is so you have 100% control over your braking...

I haven't looked to see how hard it is to figure out what lines need to be tee'd together, was it pretty straight forward and obvious?

BigTyla
02-15-2012, 11:00 PM
Someone else did that on here, which I think is the most awesome idea since its only a couple bucks for the fittings, and makes it a lot easier to accomplish, the only down side is, you still have a million lines running through the bay, but I think the biggest advantage and reason for doing this is so you have 100% control over your braking...

I haven't looked to see how hard it is to figure out what lines need to be tee'd together, was it pretty straight forward and obvious?

Yeah, just keep the fronts and rears together and everything is ezmode.

Nihil
02-16-2012, 02:50 AM
Yeah, just keep the fronts and rears together and everything is ezmode.

Did you just bend everything closer together and Tee it? No need to cut and re-flare, huh? I haven't looked yet, but I believe there's six lines at the pump, right? So I'm guessing there's a front and rear line from the master cylinder, then one for left and one for right, for front and rear, right? so you'd Tee the appropriate three together? I don't know much about brake systems or abs systems, but doesn't our system work in some sort of cross pattern style? or is that done at the Prop valve so you don't have to worry about that, just hook the two rears up to one master line, and the two fronts up to the other master line?

Just askin questions blindly right now since I haven't had time to look at the car and assess the situation

BigTyla
02-16-2012, 01:08 PM
Did you just bend everything closer together and Tee it? No need to cut and re-flare, huh?

The fittings going to my ABS were frozen so I cut my lines, bent them in an appropriate position, slipped on a new flare fitting, and reflared the line. If you follow this same procedure I recommend filing the end of the flared line down for best fitment.


I haven't looked yet, but I believe there's six lines at the pump, right? So I'm guessing there's a front and rear line from the master cylinder, then one for left and one for right, for front and rear, right? so you'd Tee the appropriate three together? I don't know much about brake systems or abs systems, but doesn't our system work in some sort of cross pattern style? or is that done at the Prop valve so you don't have to worry about that, just hook the two rears up to one master line, and the two fronts up to the other master line?

Yes, two lines from the master cylinder go into the ABS, and four lines come out of the ABS. If you look at your ABS pump there should be labels for which lines are the fronts and which are the rears. This should also be explicitly stated in your shop manual.

Setting your brake lines up in this fashion will provide equal brake pressure at both the front and rear, so to compensate for this you ideally want one of the following:

1) Significantly smaller rear brakes compared to the fronts.
2) Adding a proportioning system.

I recommend the following reading:

Proportioning Valves (http://www.stoptech.com/technical-support/technical-white-papers/proportioning-valves)

This is a great source for explaining proportioning in regards to braking performance.

For more information on how to install a proportioning valve, read Brake Proportioning Valve Install (http://robrobinette.com/brake_valve.htm).

NOMIEZVR4
02-17-2012, 11:03 AM
Also ditched mine when I redid my motor..used OEM lines and proportioning valve...love the way it looks under the hood..I HATED those lines running all under the engine bay. Gotta love the weight savings too..

92RT-TT
02-17-2012, 07:03 PM
My STM kit just came in today! With 2 fortune cookies in the box too lol. Everything looks great! I'll post up a pic once I get it installed

Mikes2nd
02-18-2012, 10:42 AM
my delivery from Cherry Hill showed up today

non abs prop valve 53.64$
lines 6.76$, 9.03$, 9.03$ and 9.29$...

I bought a non abs master cylinder a long time ago and picked up a rebuild kit and seals(55$)

Shipping 10 bucks

n2nsanity
02-19-2012, 12:12 AM
Last year I sold my non-abs prop valve to someone on here
Now I need it, lol

Thanks for the prices, $150ish isn't too bad
I never noticed a difference between abs and non-abs master cylinders. I'll have to look into that.

I left everything in place, after swapping harnesses for a non-abs one, just disconnected the abs computer and wheel sensors. This isn't the proper way, but my brakes still work fine.

92RT-TT
02-19-2012, 04:20 PM
Last year I sold my non-abs prop valve to someone on here
Now I need it, lol

Thanks for the prices, $150ish isn't too bad
I never noticed a difference between abs and non-abs master cylinders. I'll have to look into that.

You may have sold it to me lol. I dont remember but I did buy it from someone on here

Greg E
02-20-2012, 07:54 PM
my delivery from Cherry Hill showed up today

non abs prop valve 53.64$
lines 6.76$, 9.03$, 9.03$ and 9.29$...

I bought a non abs master cylinder a long time ago and picked up a rebuild kit and seals(55$)

Shipping 10 bucks
Can you plz post all the part numbers? I need to do this on the 98. The lines I used on the 99 came from a parts car.

Mikes2nd
02-20-2012, 11:32 PM
Here is what I ordered.

I am not sure about first/second gen but I don't think there is a difference.

"kits" don't list first vs second gen so these are what you need(at least the tubes and prop valve). If your rebuilding I would double check the rebuild kit.

MB618846 Tube FR BR 6.76
MB681849 Tube FR BR 9.03
MB618840 Tube BRAKE 9.03
MB618843 Tube BRAKE 9.29

MB668841 Valve Brake 53.64


For the rebuild kit
MB857842 Cylinder Kit 49.74
and 2 master cylinder seals
MB238089 Seal, Brake * 2 = 4.78

I picked up a non abs master cylinder a few years back so I will use that to clean it up.

n2nsanity
02-22-2012, 05:09 AM
You may have sold it to me lol. I dont remember but I did buy it from someone on here

I know I sold it really cheap like $20 shipped I think.

Also, I didn't see it mentioned, but if you change out the knuckle/hub for a non-abs knuckle/hub, you need to use the non abs axles. That ring with the teeth for the abs sensor is annoying. When you have a bunch of mixed parts it's easy to forget these things. I recently bought the wrong axle because of this, lol.

Also, someone should do a write-up on the abs delete and sticky it.

anyonebutme
02-22-2012, 11:07 AM
I know I sold it really cheap like $20 shipped I think.

Also, I didn't see it mentioned, but if you change out the knuckle/hub for a non-abs knuckle/hub, you need to use the non abs axles. That ring with the teeth for the abs sensor is annoying. When you have a bunch of mixed parts it's easy to forget these things. I recently bought the wrong axle because of this, lol.

Also, someone should do a write-up on the abs delete and sticky it.

You can just knock that ring off, it's just pressed on.

Austin@STM
02-22-2012, 11:31 AM
You can just knock that ring off, it's just pressed on.

Yes, they come off pretty easy with a hammer and screw drive. Also an easy way to drop a pound of rotating mass.

n2nsanity
02-22-2012, 11:46 AM
really? didn't work so well for me
i think i was scared to hit it too hard, didn't want to damage the hub
good to know for next time i guess

on the whole wrong axle issue, there was a similar looking ring on the axle itself that needed to be removed
less hassle than returning it and getting another

anyonebutme
02-23-2012, 11:15 PM
really? didn't work so well for me
i think i was scared to hit it too hard, didn't want to damage the hub
good to know for next time i guess

on the whole wrong axle issue, there was a similar looking ring on the axle itself that needed to be removed
less hassle than returning it and getting another

Not following you. The ring is on the front axle, it comes off pretty easy. Rear axle ABS ring is on the stubshaft, might need a press for that one as I never tried yet, but it does come off. Only the sensor is mounted on the hub itself.

i3igpete
05-11-2012, 09:43 AM
4120

is this diagram correct?

BigTyla
05-11-2012, 10:30 AM
Looks correct to me.

i3igpete
05-11-2012, 11:02 AM
4121

i think i've got it figured out... can someone double check the fitting types here?

http://www.streettunedmotorsports.com/parts/b/stm_3000gt_abs_delete_kit2.jpg

JGreenwood238
05-11-2012, 02:59 PM
Not sure about the fittings but to anyone thinking about doing the ABS delete, I encourage you to pull the parts you will need from the junkyard, that way you will know what you're getting into on your own car! I got everything I needed from a base model 3kgt at LKQ for less than $30. I did the whole thing with my plenum and heater hoses on too but here's the easiest way IMO. (Keep in mind I'm nonturbo so someone should rewrite this with turbos/intercooler piping in mind, feel free to add to it or change it as I'm probably forgetting stuff).
Step 1 BUY A LINE WRENCH
Step 2 Drain coolant
Step 3 Remove Intake/Plenum
Step 4 Remove battery/tray/wiper fluid
Step 5 Remove Heater Hoses
Step 6 Remove Cruise Control
Step 7 Remove Brake Master Cylinder and Brake Booster
Step 8 Loosen all brake lines from the ABS proportioning valve
Step 9 Jack the car up some so you can get into the wheel well, loosen the lines from hard line to soft on both the passenger front and driver front, you may have to take off your wheels.
Step 10 Cut all the lines at the ABS Pump and start snaking all of the brake lines out of your engine bay, a few of them will need to be cut in multiple spots. BE CAREFUL not to cut the hard line for your clutch as it runs with the brake lines
Step 11 Once all of the brake lines are removed you can remove the ABS Pump, I had to remove my passenger fender to do this.
Step 12 Remove the ABS proportioning valve and replace it with the non-ABS unit. Leave the bolt a little loose, it will help you attach all the lines.
Step 13 Start snaking your new brake lines back through the steering rack and getting them all into place.
Step 14 Attach all the lines, tighten everything, reassemble your mess of a car, bleed your brakes and you should be good to go.

As I said before, this is just a rough guide of how I did the ABS delete on my SL with the addition of things my car doesn't have like the cruise,battery,wiper fluid etc.. Someone really should do a full writeup for the VR4s, I learned a lot about my car doing this delete and I'm glad I did it. Just a year ago I used to look at all those lines and was like what the ****! lol

J. Fast
05-11-2012, 06:43 PM
Im still scratchin my head as to why you guys deleting the abs and arguing performance and better brakes aren't remote mounting the res, swapping out the brake master with a pro dual circuit, and deleting the booster. Why do you guys want a brake booster with no abs? You could stop your car in 1/2 of pedal travel with your pinky toe by swapping out the master. Not only that, but lots more room and less stuff to hang on to heat.

JGreenwood238
05-11-2012, 06:58 PM
I deleted the abs to clean up the engine bay and shave a little unnecessary weight. The brakes feel about the same to me, I'm just a little more cautious about driving in the rain and such. I do agree with you though, I was looking into a better master cylinder so I could delete the booster but I want to get the VR4 rear brakes first for a little extra stopping power.

J. Fast
05-11-2012, 07:09 PM
Size up the rear brakes and use a bias bar. Front to rear torque split is a turn of a knob away... Easy to tune when you add a big wing, diffuser, or splitter, you start generating downforce, or the road surface and traction conditions change.

JGreenwood238
05-11-2012, 08:01 PM
Do you have the brake booster deleted on your car? I'd like to see how it looks and how you set it up, like did you bend the stock lines or use stainless braided lines.. Oh and is a bias bar basically an aftermarket proportioning valve? Never heard of it.

92RT-TT
05-13-2012, 06:55 AM
Im still scratchin my head as to why you guys deleting the abs and arguing performance and better brakes aren't remote mounting the res, swapping out the brake master with a pro dual circuit, and deleting the booster. Why do you guys want a brake booster with no abs? You could stop your car in 1/2 of pedal travel with your pinky toe by swapping out the master. Not only that, but lots more room and less stuff to hang on to heat.

Do you have part numbers or suggestions for specific parts to use for a swap? I deleted the abs and being the motors out it'd be a great time to remove the resevoir and remote mount it as well as remove the booster... I just don't know where to even begin to look for the correct parts to swap them with.

Assy
05-13-2012, 08:10 AM
i just went to pick and pull and grabbed what i needed cost me 12 bux

i also installed it all with the motor in the car, i did not remove the rack

i3igpete
05-13-2012, 12:18 PM
after taking a second look at the hard lines that snake under the rear turbo and master... how in the HELL did you guys do that?

J. Fast
05-14-2012, 03:44 PM
Do you have part numbers or suggestions for specific parts to use for a swap? I deleted the abs and being the motors out it'd be a great time to remove the resevoir and remote mount it as well as remove the booster... I just don't know where to even begin to look for the correct parts to swap them with.

There's lots of considerations in designing a setup. I would recc you read this: >>> FSAE Racecar Brake Design (http://www.scribd.com/doc/64137765/FSAE-Racecar-Brake-Design) <<< and sort of look at the whole thing from a development standpoint (might be quite facinating for some of those racers out there that think brake boosters are for race cars). I would pay close attention to the design in the Dimensioning Section of the article (Section 4. page 224) wherein a double master system is adapted to a vehicle and driver brake transmission is considered.

To answer you question, in a nut shell you would need:

1) (1) dual master brake pedal assembly https://www.pegasusautoracing.com/productdetails.asp?RecID=8852

2) (1) balance beam (dependant on pedal mounting style preference) comes with the pedal assembly I linked in but if using a different assembly then https://www.pegasusautoracing.com/productdetails.asp?RecID=6531

3) (2) master cylinders one 7/8" and another 3/4" (a Tilton 74 or 75 series is suffice for street applications) https://www.pegasusautoracing.com/productselection.asp?Product=3506

4) (2) master cylinder reservoir remote adapter caps (adapts to master so you can remote mount res) https://www.pegasusautoracing.com/productdetails.asp?RecID=1117

5) (2) remote reservoir mounting brackets and o-rings (to relocate standard res that comes with master) https://www.pegasusautoracing.com/productdetails.asp?RecId=1111

6) (8) lineal feet of remote mounting brake fluid hose https://www.pegasusautoracing.com/productselection.asp?Product=3575

7) (1) Remote dual brake fluid reservoir (you can also go to E-gay and type in "Billet Reservoir" and pick a billet option for $20) https://www.pegasusautoracing.com/productdetails.asp?RecID=1120

8) (6) screw brake clamps variable size (unless you adapt everything to braided) https://www.pegasusautoracing.com/productdetails.asp?RecID=1132

9) (2) braided brake lines from the brake master outlets to the proportioning valve

10) (1) bias bar adjuster https://www.pegasusautoracing.com/productdetails.asp?RecID=1090


I'd do all the math in the SAE manual to show you how I arrived at estimating the brake master diameters but I'm tired and busy and don't have time for Mathematica atm.