View Full Version : Cheap front turbo upgrade?
Kilo_SME
12-14-2010, 06:49 PM
So, I just can't keep thinking about this to myself any longer. Didn't want to post this because I thought people would think I was stupid.lol Anyway, I found this flange adapter on ebay, that allows us to run 14b,16g,18g ect turbos using the stock manifolds. The more, and more I think about it, I just cant find a reason why the turbos shouldn't bolt right up. The only thing I think I would have to change is the o2 housing.IDK let me know what you guys think, I would love a 16g/9b combo:D
Here is the link to the adapter:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=130438334990&viewitem=&sspagename=STRK%3AMEWAX%3AIT
Turbo Beast
12-14-2010, 07:13 PM
So, I just can't keep thinking about this to myself any longer. Didn't want to post this because I thought people would think I was stupid.lol Anyway, I found this flange adapter on ebay, that allows us to run 14b,16g,18g ect turbos using the stock manifolds. The more, and more I think about it, I just cant find a reason why the turbos shouldn't bolt right up. The only thing I think I would have to change is the o2 housing.IDK let me know what you guys think, I would love a 16g/9b combo:D
Here is the link to the adapter:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=130438334990&viewitem=&sspagename=STRK%3AMEWAX%3AIT
So, what happened to thinking?
Goallie11
12-14-2010, 07:56 PM
Won't that make everything else not line up? exhaust and such.
mh3kgt
12-14-2010, 07:56 PM
In theory it should work yeah, not sure, but you'd probably need a custom DP, or a way to mate it to the stock O2 housing, as well as some custom IC piping to mate the front possibly...otherwise should be no problems.
mcshooter
12-14-2010, 09:24 PM
you should be able to use them, the use of flex sections and if necessary your local muffler shop has weld on flanges that you could use for a spacer if necessary, just need more gaskets, why not give it a try ..
DocWalt
12-14-2010, 10:03 PM
It's cheap, and a 14b is cheap, but all the pita work to make it fit isn't going to be easy.
Goallie11
12-14-2010, 10:22 PM
And a 14b isn't even worth upgrading to in my opinion.
Unknownvr4
12-14-2010, 10:57 PM
And a 14b isn't even worth upgrading to in my opinion.
Why wouldnt it be? It flows slightly less than a small 16g.
hated
12-14-2010, 11:05 PM
do the rear!
stealthee
12-14-2010, 11:56 PM
Why wouldnt it be? It flows slightly less than a small 16g.
Because 14b's fail more than a 1g 3s ECU's capacitors. If going td05, 16g is the minimum anyone should go, and they should just do both, instead of just the front.
DocWalt
12-15-2010, 12:09 AM
16g is definitely the better choice, but I know guys with 14b's and 200k+ miles on them still running, using two-step anti-lag launches, lol.
i3igpete
12-15-2010, 10:33 AM
adapter plate will require custom o2 housing and intercooler piping. If you have a welder, i'd say go for it.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.