stupid question about the rear steering pump.

[jtvr4]

How do you remove it? Before I go about using a prybar, I figured the smartest thing I could do was ask someone who may have done this before.

[Hans@GZP]

One 14mm bolt, then twist it back and forth while pulling up. If you're doing it with the diff in the car, then a pry bar may be needed.

[Austin@STM]

One 14mm bolt, then twist it back and forth while pulling up. If you're doing it with the diff in the car, then a pry bar may be needed.

Thats how i got mine out, and then i just plugged the whole with a freeze plug, 1 1/16'' or 1 1/8'' i believe it was.

[jtvr4]

Thanks for the info guys.