View Full Version : Polished my own upper plenum
I kept the original rough look with a polished finish =) didn't take me too long to do it.
mcshooter
12-12-2010, 12:06 AM
looks good , i have done only one of these and would not do it again, i had to purchase some fine double cut rotary files which i used with beeswax, some spindles, and different grit pads , buffing wheels and different rouge. i also found some buffing grit that you put on a buffing wheel which works like a sanding disk. it took a lot of time and years ago i worked polishing molds so i was not a beginner. with the time it takes next time i would pay someone to do it. the front rocker cover is a piece of cake compared to the intake ...just get them powder coated
this actually didn't take me too long at all. i'm going to be doing my fuel rails, rear valve cover and water neck. i would do it again if someone paid and wanted it to look like mine. i don't want to pay someone to do it when i can haha. i bought the front but prolly could have done it myself. the rear is going to be even easier! did you use to do it for people?
TT4ME
12-12-2010, 12:13 AM
I spent about 2 hours on mine. It looks great!
Can't believe people will pay a couple hundred to have it done.
i agree, i would do it 75 shipped for people if anyone wanted it done
green-lantern
12-12-2010, 12:42 AM
i agree, i would do it 75 shipped for people if anyone wanted it done
I'm sorry but people pretty much expect a chrome look if they pay for having this done. Don't get me wrong yours looks better than it did stock but I wouldn't be happy if I paid 75 bucks for it. I did mine also but I sanded all of the rough edges and pits to almost a perfect shine before I put the polishing wheel to it. It took quite some time to do that. Polishing company's have big machines/polishers to save that time but still have a very shiny finish. That's worth 100 bucks to a lot of people. I'll never do another plenum but I have done fuel rails, motor mounts and some other stuff that I can run a sander on much easier.
Keep it up though, you will learn more tricks as you go along. I find it quite therapeutic sometimes.
whoops i didn't mean to put 75 haha, meant 45
mcshooter
12-12-2010, 11:54 AM
gl is right if you do one to look like chrome you wont do another. 45 bucks wont even pay for what you need to do a perfect job.
green-lantern
12-12-2010, 01:47 PM
It's all the nooks and crannies in that damn plenum that make it the worst to do. You can get some of it with an electric sander and a die grinder with a cone sanding wheel but sooner or later you have to hand sand that bitch. The fuel rails are pretty easy because you can do almost all of the sanding with an electric sander.
If you got the time and a little bit to invest then search for tips and get some of the sanding stuff you will need. Then get some extra parts (Valve cover, Plenum and fuelrails) and go to town. Put them up for sale when you are done and see what you can get out of them.
dbest671
12-12-2010, 05:50 PM
Trust me, if you polish a plenum to make it look like a mirror, get all the nooks and crannies, you will want more than $200 for all your time and effort. You probably won't get any more than $200 though.
I used to polish plenums and sell them, but then people were saying $200 + shipping was too much... so I stopped.
Drweldin
12-12-2010, 10:21 PM
Yeah...If youve ever polished one of these (so it is smooth and looks like chrome) you'll know how time consuming and hard on your hands it is...I can't believe how cheap they usually are....I don't think I would do it for $200, LOL.
Rom3BreaK
12-13-2010, 12:20 AM
Wow, looks a lot better than stock IMO. How long is not too long and how did you do it?
I may have a little project in the near future...
it probably took me maybe a max of 2 hours. I first used a course wire wheel on my hand drill then changed to a fine wire wheel. Then i polished and re wired it with the fine wire wheel to get the polished looked. if i dont like how it looks when i have my car back together i am going to sand it fully down and make it to a chrome look. it looks better in person then it does in pictures btw
i3igpete
12-13-2010, 09:53 AM
i could possibly do $45 for that. i mainly just want to get rid of the yellow/brown crud and make it look like it's not made out of sand.
i would probably do it cheaper. i like to help out 3s friends =D
mcshooter
12-13-2010, 06:57 PM
wait unil you try to do one to look like chrome , $200 is a steal .. like i said i did one and wont do another, look at powder coating
CoreyB
12-13-2010, 07:56 PM
I did the easy part of mine to look like chrome and painted the rest. I wasnt to interested in doing it all because as said its a lot of work.
MightyMouse
12-15-2010, 10:00 AM
You guys all seem to be saying that you want to do, to your plenum, what AirCraft stripper does.
Just buy some of that and brush it over your plenum with a brush you don't care about.
give it 10-15 minutes and then rinse it off..
Then go through and hit the spots you missed.. The plenum will be bare aluminum at this point and ready for a quick sanding..
Granny
12-15-2010, 10:28 AM
My son used AirCraft stripper on some of his engine parts and said it worked really well getting the old finish off.
A friend of ours has a business polishing metal and does all of our pieces.
I think he charged us $150 to do ours. He stripped, sanded and polished it to look like chrome.
He has all the equipment to do a professional job and there's no way we could get the same results.
MaxClass
12-15-2010, 10:43 PM
This link will show you what a beautifully polished set of Valve Covers and the Plenum look like.
http://gallery.me.com/maxetaylorjr/100023/PolishedTopEnd/web.jpg?ver=12924668550001
After untold hours trying to do what I didn't know how to do I gave up on and let someone local here in Vegas do the work for me. Bottom line was $400.00. You don't really appreciate the work that goes into a task like this unless you try it yourself first. No cheap, but worth the over all look. Some folks don't like the "bling" factor but it works for me and it will be a whole lot easier to keep clean.
Roybatty
12-16-2010, 02:24 AM
After untold hours trying to do what I didn't know how to do I gave up on and let someone local here in Vegas do the work for me. Bottom line was $400.00. You don't really appreciate the work that goes into a task like this unless you try it yourself first. No cheap, but worth the over all look. Some folks don't like the "bling" factor but it works for me and it will be a whole lot easier to keep clean.
I like it, very sharp look; could have saved a little and not gotten the rear done, but you are being thorough; thats good. I may try to do a little myself for stress relief as others have posted. The pro job is something I will do when I get more play money!
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.