View Full Version : ebay front lower ball joints
dfoster101
12-11-2010, 05:08 AM
are these ebay ball joints any good? i need some and thinking about these or the 3sx ones which i know are better but if these are decent id as soon pick these up for a bit cheaper
(heh an goodyear tried to tell me that i had to buy the whole control arm because you cant get them seperate (ball joint from control arm) that they arent removeableanywyas which ones on that page do i get and or jsut go with the 3sx ones for a bit more?
http://shop.ebay.com/i.html?_nkw=front+ball+joint++dodge+stealth&_sacat=0&_odkw=upper+control+arm+dodge+stealth&_osacat=0&_trksid=p3286.c0.m270.l1313
DocWalt
12-11-2010, 05:24 AM
Go with the combo pack, or do what I did, and go to your local parts store and:
What you are looking for is Moog K9855 or its equivalent.
TRW 104-244 is one such equivalent.
So is the NAPA ATM 1013408.
dfoster101
12-11-2010, 05:27 AM
yeh how much are they at napa tho? im on a very very limited budget... jsut got a front main seal replaced and 2 new front tires and didnt have much fore money fore that all happened as it is lol what ya mean by combo pack tho ? on ebay?
DocWalt
12-11-2010, 05:31 AM
http://cgi.ebay.com/ebaymotors/2-Dodge-Stealth-Front-Lower-Control-Arm-Ball-Joint-_W0QQcmdZViewItemQQhashZitem56415e14eaQQitemZ37046 3872234QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries
That looks exactly like what I installed. That auction is for two. I think I paid $25 a piece. It's good practice to replace both at once, but if you're really tight on money, it's ok to replace one and replace the other as soon as your budget allows.
The big advantage to the more expensive 3sx BJ's is the zerk fitting. Ability to re-grease ftw!
dfoster101
12-11-2010, 05:33 AM
naw im gonna do both sides might even do the rear while im at it now that im finding the parts this cheap ... still cant find anything on napas site but advanced found the moog's funny how when i called em they couldnt find em lol 23 apiece at advanced http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_Ball-Joint-Moog_20518427-P_66_R%7CGRPCHASAMS____
and 15 at rock auto
dfoster101
12-12-2010, 12:11 AM
hmm so i went a head and ordered everything form advance auto today came up to 191 bucks for inner and outter tie rod ends and ball joint both sides.. hopefully i dont need all these parts but i oredered em so id have them if i needed em...
stealthee
12-12-2010, 01:06 AM
No parts stores are gonna show ball joints for a 3s, because its listed as a non replacable part. You are supposed to replace the whole control arm according to the dealer. These parts are direct fits though. Its just an example of dealers/manufacturers who like to try to make things more difficult/expensive, than they need to be.
Just keep those part numbers handy for future reference.
dfoster101
12-14-2010, 01:03 AM
hmmm after looking on advance's website it says that "Moog K9855" "does not fit my 93 stealth"... just a lil confused about that is all .. i mean i ordered the right one right?
also seen they have energy poly end links and bushings for sway bars at advance for cheap. so if i can come up with enuff money tomorrow im gonna do the front and rear sway bar links and bushings but atleast try to do the front sway bar bushings n end links cause i know the bushings are getting a lil' worn up front (and a bit in back), and not the tightest, and wait to do all the rear bushings when i have more money. less it wouldnt be a good idea to do the front and not the rear? I deffinatly know its not optimum handling but unsafe ?
in which case if it would be unsafe if i can afford it ill do both front and rear sway bars tomorrow, or wait til i can afford it,, just not diggin how much it rolls on the turns as it is now...
stealthee
12-14-2010, 07:04 AM
Advance says it doesn't fit because Advance, just like the dealer, will only sell the whole control arm. It fits.
DocWalt
12-14-2010, 05:09 PM
Definitely fits, the guys at the counter were so confused, I just gave up and told them it was for a Sonata. :)
stealthee
12-14-2010, 05:25 PM
Thats like when I go to the parts store to get my spark plugs. The ones I get aren't listed as fitting in a Stealth, but they obviously do. I just give them the part number and tell them I know its what I need.
Then again, most of the guys at the parts store know me so they don't even question me when I ask for certain things.
dfoster101
12-14-2010, 05:47 PM
Definitely fits, the guys at the counter were so confused, I just gave up and told them it was for a Sonata. :)
lol so you jsut go the path of least resistance and told em what they wanted to hear huh lol nice.... ok so what diameter are my front and rear sway bars? need to know so i can get the right diameter bushing... they cant figure it out at the store lol or if you have the part number for the sway bar bushings i would appreciate that as well
dfoster101
12-18-2010, 07:23 PM
well got my front sway bar endlinks and ball joints in ... (both moog)... turned out my tie rods were like brand new so didnt do anything with those... soon as i can get up more cash im doing the rear endlinks and front and back sway bar bushings ... really cleaned up the clunky sounds and strange vibrations alot so far , but cant wait to see what its like when EVERYTHINGS done... also got a 4 wheel alignment done as well.. man my passenger side ball joint and all the endlinks had zero life left in em... handling is much improved ... much tighter and much more responsive !!!
DocWalt
12-19-2010, 02:18 AM
I'm glad to hear it helped! :) It seemed like every time I fixed something, something else would wear out, never ending battle, haha.
dfoster101
12-19-2010, 06:50 PM
well still need to do the endlinks in the rear and the front and rear sway bar bushings but then it should be all good... who knows my luck itll just expose another problem... least these things are expected maintence and not some major problem... just have to work through it .. the girl friend says ill probably end up restoring it one part at a time lol .. i just call it poor mans car payments if you know what i mean lol like bought for 1500 end up spend 5k on total repairs and end up spending 6500 by the time im done, or coulda spent 6500 upfront and not had to do all these repairs but i didnt have 6500 or whatever so i got what i got lol poor mans car payments lol best part of that is tho that i get an upgraded car in some ways vs. stock
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.