View Full Version : Speed bleeders fits poorly?
Chris@Rvengeperformance
12-07-2010, 01:19 PM
Has anyone run into this?
I have the correct speed bleeders, but they screw in like crap and one of them didn't tighten completely until the hex part bottomed out on the caliper. I'm really afraid it will leak and I am probably going back to oem bleeders because oem bleeders fit fine. I'm going to be really pissed if it messed up my caliper.
green-lantern
12-07-2010, 01:25 PM
Yep, I had some and they bottomed out at the hex. I put stock ones back in. I never gave it a try so I don’t know if it will leak or not.
Chris@Rvengeperformance
12-07-2010, 01:44 PM
they are definitely shorter than stock.
OhioSpyderman
12-07-2010, 02:12 PM
Never tried them on my brakes, but have them on my clutch and LOVE EM!!!
Bob. :)
UTRacerX9
12-07-2010, 05:50 PM
I've had them on my car for years, no problems. Love em.
rdmelton
12-07-2010, 10:55 PM
If they bototmed out, it's likely that you do not have the correct ones. I don't recall the part numbers, but when I got some several years ago, there was some confusion about the correct part numbers and the part numbers are different for various years (not just 1G/2G).
Chris@Rvengeperformance
12-07-2010, 11:33 PM
yeah i got them off a forum member a long time ago and just got around to trying them. They are just way too short, they are the correct thread, but the length is wrong. I have all 2G brakes, but I only tried the fronts. I think the stock ones are 40% longer, there is just no way these can seal.
oh well, I'd rather bleed the old way anyway, you can't really see the fluid this way. Luckily the stock bleeders still screwed back in just fine.
wingnut
12-08-2010, 12:03 AM
stockers here...dont plan on messin with em :D
Mine worked fine thus far, but I've only fitted them to the 355mm stoptech front brake calipers.
Show Killer
12-09-2010, 09:51 AM
I've had them on my car for years, no problems. Love em.
Ditto. I got mine form 3SX years ago.
green-lantern
12-09-2010, 12:58 PM
yeah i got them off a forum member a long time ago and just got around to trying them. They are just way too short, they are the correct thread, but the length is wrong. I have all 2G brakes, but I only tried the fronts. I think the stock ones are 40% longer, there is just no way these can seal.
oh well, I'd rather bleed the old way anyway, you can't really see the fluid this way. Luckily the stock bleeders still screwed back in just fine.
I'm pretty sure we bought them off the same guy. He worked at a parts store or something.
Chris@Rvengeperformance
12-09-2010, 01:30 PM
yep...
anyonebutme
12-09-2010, 01:45 PM
Mine worked awesome, same length as stock all around, 2G brakes. Got them from SCE (basically, front's were 2nd hand, but from SCE).
dpfsharkbait
12-09-2010, 01:51 PM
Got mine from 3sx and they work perfectly
green-lantern
12-09-2010, 03:10 PM
yep...
Looks like we got burnt bro. :/
Chris@Rvengeperformance
12-09-2010, 03:12 PM
oh well, shit happens. I usually "assume" when someone is selling something that they are selling the correct part, my mistake really.
green-lantern
12-09-2010, 03:22 PM
oh well, shit happens. I usually "assume" when someone is selling something that they are selling the correct part, my mistake really.
Fuck that! let's kick his ass!! :lo5l: jk I think they were only 5-10 bucks or something.
i3igpete
12-09-2010, 03:24 PM
oh well, I'd rather bleed the old way anyway, you can't really see the fluid this way.
put on clear kitchen water hose onto bleeder. lay down on the ground outside the driver door, on your side. stick one foot into the foot well and pump until you see the hose run clean.
Chris@Rvengeperformance
12-09-2010, 03:33 PM
lol I'd love to see you doin that pete.
easier to just have my wife pump the brakes when she's around, lol.
green-lantern
12-09-2010, 03:45 PM
Yeah I just get whoever is around to pump them but I do use a clear hose to watch for bubbles and nasty crap. I would like to see big Pete get around that rollcage and watch that rear passenger side while pumping the brakes. lol
Chris@Rvengeperformance
12-09-2010, 04:26 PM
Yeah I just get whoever is around to pump them but I do use a clear hose to watch for bubbles and nasty crap. I would like to see big Pete get around that rollcage and watch that rear passenger side while pumping the brakes. lol
that sounds like a challenge for NG2011
i3igpete
12-10-2010, 10:56 AM
this might be a no-rollcage-only technique :suspect:
anyonebutme
12-10-2010, 09:50 PM
You totally got that, stick your left leg through the front triangle of the FIA bars so your knee is facing the seat...
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.