Sway bars

[GordonRamsey]

How does one go about putting these bushings on a new sway bar? And also, whats all the gold plates for?

[GordonRamsey]

Anyone???

[GordonRamsey]

what the hell kind of shitty sway bars are th4ese? The brackets dont bolt to anything on the bottom half of it!

[DrGonzo]

Pics might help!! Plus the brand so we know what the hell you are talking about...:)

[GordonRamsey]

addco. I cant do pics.

[GordonRamsey]

NO ONE has had or heard of experience with thesde?

[DrGonzo]

Are these front or rear sway bars?? TT, DOHC or SOHC??? Did you get them from 3SX??

[GordonRamsey]

ah i figured it out. The hardware was backwards, its figured out now.

[GordonRamsey]

Hmm I'm hearing a clunking noise from the rear bar. The bolts are loosening themselves it seems anybody have any experience close to this?

[DrGonzo]

They are either not tight enough or No lock nuts or split washers were used. Might want to also try using thread lock on the nuts/bolts.

[GordonRamsey]

Well the bolts will not strip, I'm just afraid of over-tightening and stripping the threads on the car.

[Hans@GZP]

I have a rear addco sway bar on my satin black car. Just make sure everything is good and tight and you shouldn't have a problem.

[GordonRamsey]

I'm going to get back under there and check it out. I was told it could also be bad endlinks?

[GordonRamsey]

I went under there and everything is as tight as the day I put them on, but I still hear clunking when I jack it up, and put it down. when I drive its on and off. I don't get it.