View Full Version : Brand new CAS. Ran for about a minute and it died.
3kgt1734
12-06-2010, 12:18 AM
See thread clueless
J_Parker
12-06-2010, 12:47 AM
Chek to see if you have power to the CAS, if so then check to see if it is sending the pulse signal when the engine is cranking. Black will be ground, red is your 12V and blue is the wire sending the pulse signal.
3kgt1734
12-06-2010, 01:16 AM
I'll check that tomorrow. But being brand new shouldn't it be working just fine?
Mikes2nd
12-06-2010, 01:18 AM
you can easily test a cas... I am one of those people who believe cas's RARELY go bad... Mitsu has those down tight. like maybe one in 100 cas's might break with cars all doing 200k.
They are stout. I bought a bunch for like 25$, they were all good, i kept for a spare but I have never needed to replace one(3 cars, 3 rebuilds).
3kgt1734
12-06-2010, 01:22 AM
you can easily test a cas... I am one of those people who believe cas's RARELY go bad... Mitsu has those down tight. like maybe one in 100 cas's might break with cars all doing 200k.
They are stout. I bought a bunch for like 25$, they were all good, i kept for a spare but I have never needed to replace one(3 cars, 3 rebuilds).
Hmm. If it's not CAS, which I doubt it is since its brand new, what could it be?
MFI? PTU?
mcshooter
12-06-2010, 05:55 PM
what else did you do?
Steve '92ES
12-07-2010, 03:48 PM
you can easily test a cas...
I'm curious, how do you go about testing the CAS?
Do you do it on the car or do you have a bench test?
What year? If its a 93+ the blade wheels can mess up the sensors if they contact them. This can happen if the wheels are bent or the sensor is installed loosely or incorrectly. May be worth checking out.
3kgt1734
12-07-2010, 06:32 PM
What year? If its a 93+ the blade wheels can mess up the sensors if they contact them. This can happen if the wheels are bent or the sensor is installed loosely or incorrectly. May be worth checking out.
It's a 95. I really really dont wanna check the wheel!!!! it is a pain in the ass getting to that thing!!!
Both belts, motor mount, idler pulley, PS tensioner, and ALL timing covers... ugh...
I have spark though! so I assume the wheel is just fine.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.