GZP Rear Diffusers!

[Emilie@GZP]

We are now offering a bolt-on rear diffuser for the 3000GT and Stealth. It is NOT a universal rear diffuser, it is fitted to the dimensions of the 3/S. They are available in CF and FRP.

Pricing is as follows:

FRP (fiberglass reinforced plastic) - $550
CF (carbon fiber) - $700

http://i34.photobucket.com/albums/d111/3Scar/GZP%20Diffuser/IMG_4580.jpg

It has been tested on a slammed 97 VR4 (tucked wheels), with minimal clearance issues on every-day driving.

(We have not tested the install on a 1g 3000GT rear bumper, or a stealth)

It butts right up against the gas tank, and extends all the way back.

There will be some cutting and grinding required (you need to cut the "lip" off the rear bumper, and some trimming to the sides of the diffuser if you wish to retain your rear tow hooks).

We will supply all of the mounting brackets and hardware.

Here are some installlation pictures. The rear diffuser was originally installed on a yellow 97 SL that we converted to AWD and Twin Turbo, and we just transferred it to our customers new 97 VR4 (hence the scratches on the diffuser).

Anyway, onto the pictures/install:

1) Cut off the "lip" on the rear bumper

2) Line up the diffuser for bracket install.
http://i34.photobucket.com/albums/d111/3Scar/GZP%20Diffuser/IMG_4535.jpg
http://i34.photobucket.com/albums/d111/3Scar/GZP%20Diffuser/IMG_4536.jpg

3) The diffuser is pre-drilled for mounting holes for the brackets, so, you will need to line the brackets up with the holes, and mark the rear crash bar accordingly. We used a marker to outline the bracket to make it easier. We did not pre-drill the brackets because every car is different.

4) Remove the rear diffuser, and mount the brackets. Use the self tapping bolts to secure the brackets to the crash bar

http://i34.photobucket.com/albums/d111/3Scar/GZP%20Diffuser/IMG_4547.jpg
http://i34.photobucket.com/albums/d111/3Scar/GZP%20Diffuser/IMG_4548.jpg

5) Mount Rear Diffuser to brackets.

http://i34.photobucket.com/albums/d111/3Scar/GZP%20Diffuser/IMG_4553.jpg
http://i34.photobucket.com/albums/d111/3Scar/GZP%20Diffuser/IMG_4577.jpg
http://i34.photobucket.com/albums/d111/3Scar/GZP%20Diffuser/IMG_4567.jpg
http://i34.photobucket.com/albums/d111/3Scar/GZP%20Diffuser/IMG_4585.jpg

[B-Man]

Do want! Too bad that's out of my price range. Fairly cheap for a diffuser though.

[FeaRpb]

Sexxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

AHHHh

DO want.

My question, how much does it weigh?

[Emilie@GZP]

8.5lbs with all of the brackets.

[B-Man]

If I test it on a 1g R/T can I get a discount? :suspect:

[Hans@GZP]

If I test it on a 1g R/T can I get a discount? :suspect:

We have plenty R/T's here to test them on. Next test car is a 1G 3kgt though... then to the stealth. I'm not sure if I even want to try to test fit it on a 2G stealth since the bumper pretty much has one already.

[FeaRpb]

My second question is, how does it look on a second gen bumper with no exhaust?

[B-Man]

Damn you samsquanch!

[Emilie@GZP]

My second question is, how does it look on a second gen bumper with no exhaust?

I hope this gives you a good idea :)

http://i34.photobucket.com/albums/d111/3Scar/GZP%20Diffuser/IMG_4581-1.jpg

[FeaRpb]

Wow that was quick, thanks Emilie.

Not sure how I like the look without the exhaust and I run open pre-cats so I don't have any lol.

[B-Man]

Just hang some tips, you don't need a full exhaust.

[Emilie@GZP]

Just hang some tips, you don't need a full exhaust.
:brilliant:

[3KVT]

Just hang some tips, you don't need a full exhaust.

haha, yeah man, what B-man said

[FeaRpb]

Yeah but that would defeat the purpose of removing exhaust for weigh reduction, along with almost everything else the car can have removed but still function lol. I would add the diffuser, it looks amazing and the weight doesn't bother me.

Its something for me to ponder on.

[3KVT]

haha, true. I just thought the idea was hilarious

[Atrosity]

NICEEEEEEEEE


Looks like I know what I am buying. ;)

[Unknownvr4]

In for pic back on the ground.

[Emilie@GZP]

In for pic back on the ground.

sorry this is not the best pic. This is from when we installed it on this customers previous car, the first time.

I will have better pictures in a week or so, once we have the rest of this customers engine build completed, and the car is off the lift :)

http://i34.photobucket.com/albums/d111/3Scar/08ba15fb.jpg

[Drweldin]

Very nice...any plans on a 2G stealth? I know they already have a quazi diffuser already, but I like yours better,
looks much more functional...

[Emilie@GZP]

you would need to cut the center of the stock rear bumper (stock rear diffuser), and I don't know how well that would look, in all honesty. But I don't see why you couldn't use this diffuser with a 2g stealth rear bumper.

[NOMIEZVR4]

WOW..that looks sooo nice! :)

I will definitely be buying one FOR SURE once my car is up and running...keep one in stock for me! :p

[CoopKill]

Decision awaits 2g on the ground completed pics...

[Emilie@GZP]

Decision awaits 2g on the ground completed pics...

http://i34.photobucket.com/albums/d111/3Scar/08ba15fb.jpg

from when it was installed on the previous car. I'll have some high-res, non-iphone pics in a week or two, once we can get the car outside :) (hopefully it doesn't snow between now and then LOL)

[J_Parker]

I may have to get one of these if I get the GTO I'm looking at!

[MR2]

Not sure what to think...just some constructive stuff, I wish it went the full width of the rear bar...I know that's pretty much impossible due to exhaust cut-outs

[GTO Assassin]

Looks good kids.

Scotty

[Hans@GZP]

Not sure what to think...just some constructive stuff, I wish it went the full width of the rear bar...I know that's pretty much impossible due to exhaust cut-outs

Yea. I would love to make it extend from side to side but there are way too many different sized exhausts we would have to cater to. It was best for us to stick with this size as to not get fitment complaints.

[EvanH]

Do you have to cut the bumper? And has this been driven at all to see if it helps? I know in theory they are, but I am just asking.

[Emilie@GZP]

Do you have to cut the bumper? And has this been driven at all to see if it helps? I know in theory they are, but I am just asking.

You have to cut the "lip" off the stock rear bumper..

http://i34.photobucket.com/albums/d111/3Scar/yellow94vr4.jpg

This has been installed on a daily driven car, not raced at all. Rear diffusers help straighten the airflow under the car, we have no means of testing exactly how much it helps, but it's a proven design.

[Atrosity]

Looking forward to the 1G bumper pics!

[IPD]

very nice work, guys (and gal). i tend to agree on the futility of 2g stealth testing. probably easier to just paint the center section on the stock bumper black, rather than trying to put this on there. looks really good. probably the best offering i've seen for a diffuser yet. it'll probably look even better on a 1st gen, due to the design of the bumper. and of course, you'd NEED a 99 garnish.

any plans to offer more FRP parts? i'm still trying to find a reputable source for a set of pureform wing pillars.

[green-lantern]

I’m still a little undecided about this. At first I thought it hung down too far, I wanted something that was tucked under a bit more but seeing it on the ground it’s kind of growing on me a bit more. I’ll be looking forward to seeing more pics at different angles, hopefully painted.

[J_Parker]

Not sure what to think...just some constructive stuff, I wish it went the full width of the rear bar...I know that's pretty much impossible due to exhaust cut-outs

I'm about 50% with you on that one, if I do end up getting one I think I'll make some inserts to close the gap on the sides of the diffuser and mold them over the exhast tips between the gap and back down to the bottom edges of the bumper. Shouldn't be too hard, and would look pretty slick.

[fullracegt]

the price and availibity are way better than pit road m. I do have two questions tho, what about people that dont have crash bars could you guys offer some type of light weight mounting bracket, and hows the fittment with the carbon fiber version?

[Emilie@GZP]

the price and availibity are way better than pit road m. I do have two questions tho, what about people that dont have crash bars could you guys offer some type of light weight mounting bracket, and hows the fittment with the carbon fiber version?

The fitment would be the same between the CF and FG.

We can fab up brackets for those who do not have a rear crash bar.

[Emilie@GZP]

I’m still a little undecided about this. At first I thought it hung down too far, I wanted something that was tucked under a bit more but seeing it on the ground it’s kind of growing on me a bit more. I’ll be looking forward to seeing more pics at different angles, hopefully painted.

It's on a black car, so, our customer is planning on keeping it the black color it is. Personally, I prefer a diffuser in black, I think it just looks more aggressive that way. I can try to photoshop it a color (along with the car) if you'd like, once we get the car outside for a full shoot. I can't make any promises on the quality of the photoshop though :p

[Emilie@GZP]

any plans to offer more FRP parts? i'm still trying to find a reputable source for a set of pureform wing pillars.

no plans at the moment, sorry.

[reallyxxxxxxloud]

I really like to look of it but the bracket bolts are terrible. It needs a cleaner fit, But I'm just fussy. Still a good price and looks cool.

[SilverJester]

It looks great! I wanna see the pics of it on a 1g 3000gt. Depending on those pics I'll either upgrade to a 2g bumper and get this or stick with my stock 1g bumper. Is there cutting involved with the 1g bumper?

[IPD]

It looks great! I wanna see the pics of it on a 1g 3000gt. Depending on those pics I'll either upgrade to a 2g bumper and get this or stick with my stock 1g bumper. Is there cutting involved with the 1g bumper?

i'm guessing the exhaust outlets on the 1g bumper will go MUCH better with this than the 2g bumper....

[Hans@GZP]

I really like to look of it but the bracket bolts are terrible. It needs a cleaner fit, But I'm just fussy. Still a good price and looks cool.

We just used some OEM black colored bolts to get it mounted to the brackets. We're looking into some better looking bolts right now. Probably a black colored bolt with a tapered head to countersink into the holes for a flush mount.

[green-lantern]

It's on a black car, so, our customer is planning on keeping it the black color it is. Personally, I prefer a diffuser in black, I think it just looks more aggressive that way. I can try to photoshop it a color (along with the car) if you'd like, once we get the car outside for a full shoot. I can't make any promises on the quality of the photoshop though :p

Don't really need great quality pics, I just want to see it at different angles. So take a bunch :)
Photoshop probably isn't necessary ether.

[mh3kgt]

In for pics on a 1g

[Atrosity]

In for pics on a 1g

Same here! :P

[Hans@GZP]

We got brackets in for 10 more diffusers. Getting a couple more diffusers in some time next week (from what I can tell) to do more test fitting on other years.

[DrkZide]

HOW DID I MISS THIS!!! WANT!!! When will they be available?

[Emilie@GZP]

They are available whenever you'd like to place an order :)

[DrkZide]

Did you finalize a price? I thought the one's on the first page were estimates.

[Emilie@GZP]

If you want to send me a PM with your zip code, I'll get you a final price, shipped, tomorrow.

[Runner up]

Oh man, this looks so awesome. Really nice job guys. :Clap:

[rawavr4]

Hmm i wonder how this would look with 4" quad tips on a 1st gen rear..

[Hans@GZP]

Hmm i wonder how this would look with 4" quad tips on a 1st gen rear..

I'll text ya when we get the next batch of diffusers in. We can put one up to the car when they get here.

[rawavr4]

That's fine with me. I need to get in there anyway so you can weld this wideband bung on for me too. And we can talk pricing on redoing the axle back in 3in with the tips.

[rawavr4]

That's cool. I need to come in anyway to get the wb bung welded in and redo the axleback in 3in with my new tips.

[FlamboyantStealthTT]

interested to see further away shots from all angles outside the warehouse

[Emilie@GZP]

We'll be taking the car outside for some better pictures once we get back after the holidays.

[93STLTH]

Seems like the pics in the first thread are not working. Anyone else have this problem?

[Emilie@GZP]

Seems like the pics in the first thread are not working. Anyone else have this problem?

They should work... try refreshing it? :confused: Photobucket is a bit temperamental sometimes.

[Emilie@GZP]

Few more pictures: (better ones will be up after the Holidays are over)

http://i34.photobucket.com/albums/d111/3Scar/Bassam/v2/IMG_5134.jpg
http://i34.photobucket.com/albums/d111/3Scar/Bassam/v2/IMG_5136.jpg
http://i34.photobucket.com/albums/d111/3Scar/Bassam/v2/IMG_5137.jpg

[jbuhrman]

Any word on IF Carbon Fiber will be an option??

[Emilie@GZP]

Yes, carbon fiber is an option :) Pricing is in the first post :)

[Amphiron]

these look like they were ment to be on my 2g stealth.

[Lancelot_GT]

I'm going to have to see this on other cars and outside of the shop in order for me to decide if I like it. Nice work, but it feels like on some cars (other than black) it may look like it's just slapped onto the car. I'll reserve judgment though, until I have seen other pics, hopefully one with quad tips too since that is what most of us have.

[Hans@GZP]

The black car will be on the road in a couple of weeks. We're waiting on the owner to come back from being out of the country. Once he's back, we'll get better pics outside and then test fit it on a blue 1G 3000GT. Sorry for no updated pics, we've been busy R&D'ing a bunch of new products.

[NOMIEZVR4]

Great job on the R&D parts...its good stuff you guys have coming out, I'm really excited..:D

[Lancelot_GT]

I need some different angles and better lighting so I can make this look right. I'm still trying to get an idea of what it would look like on a different colored car, here's mine.
http://i28.photobucket.com/albums/c231/lancelotgt/Reardiffuser1Medium.jpg

[IPD]

seems to highlight the fundamental design flaw on the back of 3kgt's; the spoiler needs to sit further back.

[Emilie@GZP]

I need some different angles and better lighting so I can make this look right. I'm still trying to get an idea of what it would look like on a different colored car, here's mine.
http://i28.photobucket.com/albums/c231/lancelotgt/Reardiffuser1Medium.jpg

wow, that looks great! It would sit a little bit lower on the rear bumper I believe. I posted a picture of it installed on a yellow 3000GT.

We've moved the car off the lift, so, I won't be able to get any good angles/better lighting pics for a bit, but I will see what I can do :)

[NOMIEZVR4]

Lancelot GT could you post more pictures please? Thanks

[Lancelot_GT]

Lancelot GT could you post more pictures please? Thanks

Lol, it's a photoshop, but I can work on some other angles

[Lancelot_GT]

seems to highlight the fundamental design flaw on the back of 3kgt's; the spoiler needs to sit further back.

Agreed. On my previous car, which was a stealth, the spoiler was intentionally installed further back, and it gave the car a completely different look. It's a modification I may even have done on this car just because I'm quite fond of the stock spoiler on these cars.

http://i28.photobucket.com/albums/c231/lancelotgt/P7310063.jpg
http://i28.photobucket.com/albums/c231/lancelotgt/P7230015.jpg

The spoiler on this car actually hung over the rear by an inch or so, whereas he stock location has it in line to be flush with the lights.

[NOMIEZVR4]

can we get a photochop of a spoiler moved further back on a 3/s? I would be interested to see how it looks...

[green-lantern]

Few more pictures: (better ones will be up after the Holidays are over)

http://i34.photobucket.com/albums/d111/3Scar/Bassam/v2/IMG_5134.jpg
http://i34.photobucket.com/albums/d111/3Scar/Bassam/v2/IMG_5136.jpg
http://i34.photobucket.com/albums/d111/3Scar/Bassam/v2/IMG_5137.jpg

I think I would like it better if it was a little further under the car. Like a half to a whole inch.

[IPD]

can we get a photochop of a spoiler moved further back on a 3/s? I would be interested to see how it looks...

well...if cianci comes through with the torino/pureform spoiler i JUST ordered, then you'll get to see it. i'm going to toss their wing and use the pillars on my n/a wing (keeping the brake light and everything. i'll post pics when i can.

[Lancelot_GT]

well...if cianci comes through with the torino/pureform spoiler i JUST ordered, then you'll get to see it. i'm going to toss their wing and use the pillars on my n/a wing (keeping the brake light and everything. i'll post pics when i can.

Is that even going to work? haha, we'll see what happens with that. Gonna do some custom fabbing. I'm not sold on that wing, but I wouldn't mind seeing some different angles on it. Good luck!

[Lancelot_GT]

Hey, whatever happened to this thread? I want to see more angles, especially further from the car so I can get an idea of what it looks like altogether with the styling of the car.

[Nationalmilkman]

Just found this. I'm waiting on sick pics too!

[Hans@GZP]

Hey, whatever happened to this thread? I want to see more angles, especially further from the car so I can get an idea of what it looks like altogether with the styling of the car.

The customer (who's car this diffuser is on) owes me a ton of money right now. So, until he owes me a half ton of money, the car still needs work haha. Supposedly he's coming down this week, so we may get pics of it outside by the weekend.

[GreedyTurbo529]

Ever tried it on a 2g Stealth yet?

[J_Parker]

Any more pics on this?

[Lancelot_GT]

Yeah, I'm still waiting on more pics, they don't even have to be professional or anything, just something to get an idea of what this thing looks like from different angles. Maybe like 20 feet away to get a complete picture as to how this thing integrates with the rest of the car.

[Emilie@GZP]

Yeah, I'm still waiting on more pics, they don't even have to be professional or anything, just something to get an idea of what this thing looks like from different angles. Maybe like 20 feet away to get a complete picture as to how this thing integrates with the rest of the car.

I'll try that tonight. The car is still stuck on the lift, we have been having a hard time getting ahold of the customer who owns it... so, it's kind of just sitting for the time being :(

[Emilie@GZP]

Once again, please try to ignore the dust :p

http://i34.photobucket.com/albums/d111/3Scar/Bassam/v2/IMG_6124.jpg

http://i34.photobucket.com/albums/d111/3Scar/Bassam/v2/IMG_6126.jpg

http://i34.photobucket.com/albums/d111/3Scar/Bassam/v2/IMG_6128.jpg

http://i34.photobucket.com/albums/d111/3Scar/Bassam/v2/IMG_6129.jpg

[CoopKill]

Please close the hatch, lower the lift, and try again?

It looks to be nice, but without it in its natural stance, on the ground, looking ready to drive as it would in the wild it's hard to pass accurate judgment.


kthxbai :suspect:

[CoopKill]

Picky little bitches are we not? :lmao:

[Emilie@GZP]

Picky little bitches are we not? :lmao:

you guys really are :lol:

Just think of it as a stock suspension car... the wheel gap is about on-par :lol:



We have a car parked underneath it currently, otherwise I'd have lowered it onto the ground.

The shop is EXTREMELY overcrowded right now, so... ground shots will have to wait a while until we can move the car out from under it :p

[CoopKill]

I don't think you are using your estrogen stick properly around there. Whip those boys in shape! LOL

[CoopKill]

P.S. Mr. Darkness would like to see it purple too!

[Emilie@GZP]

I don't think you are using your estrogen stick properly around there. Whip those boys in shape! LOL

my estrogen STICK?! :runaway:

[MR2]

all your lights are at an angle :p how odd. looks like your in the middle of an earthquake.

[MR2]

P.S. Mr. Darkness would like to see it purple too!

ok that's an awesome post.

[J_Parker]

It looks like your customer doesn't want his car anymore, I'll be there next week with five bucks :D

[Emilie@GZP]

It looks like your customer doesn't want his car anymore, I'll be there next week with five bucks :D

I'm starting to think he may not want it anymore either. LOL

[MR2]

is it Stealthee's car :p ? ;D

[J_Parker]

^^^ LOL! :p

[CoopKill]

is it Stealthee's car :p ? ;D

Nope the tranny is in it!

[Lancelot_GT]

Now I'm noticing the lights too, what is up with that, were you built on a hill and the contractor forgot to whip out his level? :p

[GreedyTurbo529]

This thread is starting to fill with win! lol. Maybe their on a ship.

[J_Parker]

Sorry, I drove by while the pictures were being taken ;)

[Rocket]

She had the new top secret magnatronic hyper drive turned on in the special test car.. it pulled all the lights that way with the magnetic field it produces :)

[J_Parker]

... Is the Crystal Skull in your shop? I think you should contact Harrison Ford.

[Lancelot_GT]

... Is the Crystal Skull in your shop? I think you should contact Harrison Ford.

Yes! I approve, Indiana Jones pwns all lol

[Emilie@GZP]

:lmao: It's the Force... I haz it.

[GreedyTurbo529]

I like how you changed your post :P

[Emilie@GZP]

I dunno what you're talking about... :suspect:

[IPD]

P.S. Mr. Darkness would like to see it purple too!

yes, and could you tie-dye it please?

[CoopKill]

yes, and could you tie-dye it please?

Hey! I have put that behind me...

:lmao:

[Emilie@GZP]

Well, I was FINALLY able to get the car outside to snap some pictures. I hope this gives you guys a better idea of how it looks :)

http://i34.photobucket.com/albums/d111/3Scar/Bassam/v2/IMG_6425.jpg

http://i34.photobucket.com/albums/d111/3Scar/Bassam/v2/IMG_6438.jpg

http://i34.photobucket.com/albums/d111/3Scar/Bassam/v2/IMG_6435.jpg

http://i34.photobucket.com/albums/d111/3Scar/Bassam/v2/IMG_6428.jpg

http://i34.photobucket.com/albums/d111/3Scar/Bassam/v2/IMG_6430.jpg


http://www.3swarehouse.com/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=424&category_id=190&option=com_virtuemart&Itemid=1

[Lancelot_GT]

Wow, looks great! But is there any way that the diffuser can be produced with sidewalls so that you can't see the mounting brackets and stuff from the side? It just looks incomplete because of the large openings that exist

[Emilie@GZP]

This is the final design. Most exhausts will hide it for the most part, and it is not reall noticeable from a normal standing position :)

[Keyan]

what are the chances to fit this to a 1g bumper? is there a similar body line to cut on a 1g bumper?

[mannavr4]

Wow, looks great! But is there any way that the diffuser can be produced with sidewalls so that you can't see the mounting brackets and stuff from the side? It just looks incomplete because of the large openings that exist

Ya, what he said! I'd buy one in a heart beat in carbon if it had side walls and went over and to the outside of the exhaust.
But it still looks good. I love all the new stuff coming out for our platform.

[Keyan]

Wow, looks great! But is there any way that the diffuser can be produced with sidewalls so that you can't see the mounting brackets and stuff from the side? It just looks incomplete because of the large openings that exist


and im sure air would catch in it cause the sides are open

[Lancelot_GT]

and im sure air would catch in it cause the sides are open

That was my concern as well

[Emilie@GZP]

Ya, what he said! I'd buy one in a heart beat in carbon if it had side walls and went over and to the outside of the exhaust.
But it still looks good. I love all the new stuff coming out for our platform.

Then we would need to make multiple designs to account for all of the exhaust options that are available for these cars. The sides are not very noticeable from a regular standpoint or from just walking around the car and with the stock tow hooks,there is no way around it.

[CoopKill]

I am not fond of the squareness of the top of it, and the way it sticks out. Sorta reminds me of a diaper or something. All of the lines on these cars are smooth and rounded.

It just looks too boxy to me...

IMO, which has been out of the norm before...

[Hans@GZP]

We can't box in the sides. You wouldn't be able to bolt it on with them closed in.

[Hans@GZP]

and im sure air would catch in it cause the sides are open

Air shouldn't get in through the sides. Even if it does, that is what the vents are for.

[Atrosity]

What about making fiberglass covers for the side that can be mounted after it is installed and the buyer can dremel it to fit their exhaust or not use it at all.

[MR2]

how about you do it anyway no need for GZP to d it! :p :p

yay for a cool product! thanks guys :D

[NOMIEZVR4]

Heck yeah! Looks great guys, Im sure with a decent drop, and a nice wing mounted on the truck this thing would POP....I'll be getting one as soon as my car is up and running! :D

[Emilie@GZP]

Once the customer starts paying us again, it's getting some coilovers and a CF 99 vr4 wing. But, at this rate, we may own the car again before that happens :lol:

[J_Parker]

We can't box in the sides. You wouldn't be able to bolt it on with them closed in.

Mount brackets, weld nuts onto brackets, line up, bolt on :)

It looks great though guys, keep up the good product line!!

[MR2]

your on 3SGTO now buddy...must complain as opposed to just fix :p :p :p

[Lancelot_GT]

your on 3SGTO now buddy...must complain as opposed to just fix :p :p :p

corrected.

[MR2]

oh shit!!!

[Emilie@GZP]

:lol:

We will see if powder coating the brackets helps a bit, and we will see if there is something we can add to the sides to close it up after it is installed.

[Lancelot_GT]

Even if it's a powdercoated black mesh or something that can be mounted to the side, just something to make it look more complete. Right now it just looks sort of tacked on. In no way am I implying that it looks tacky though, don't take it the wrong way

[Emilie@GZP]

not at all :) I appreciate the responses. If there is something I can add or change (to a certain degree), that will make it better, then I want to hear from you all about it :)

[93SlugTT]

I have gone though 13 pages of sex for 3000gts and promises for a 1g stealth pic, and have gotten at the end of this thread

That's it, wither post it up or I'm pressing charges.

You have been served .

Choose your posion.


Posted by android

[Emilie@GZP]

I hope this is what you are looking for... (it's a photoshop)

http://i34.photobucket.com/albums/d111/3Scar/92%20blue%20stealth%20TT/IMG_3321_.jpg

[IPD]

not bad. i could see that working. i still don't think it would work as well on a 2g.

[93SlugTT]

Thank you sir! It is sexy. 550 hmmmm.

I like it, how many do you have left? I am at cross roads with the 2g bumper or this..

[Emilie@GZP]

I'm a lady, not a sir ;)

We have enough that are ready to ship :)

We also have a stock of 2g rear bumpers as well.

-Em

[93SlugTT]

Sorry, thank you Ms. Or Mrs.?

What color and how much for a 2g rt, rt/tt rear bumper

[IPD]

...cheaper than buying a diffuser & mounting it to a 1g. :p

[Emilie@GZP]

Ms.... Hans hasn't put a ring on my finger yet. Lol. I have a green one. Paint is not in the greatest shape, but its good structurally. $250 + shipping.

[93SlugTT]

well tell hans to get to work! lol

hmm hard bargin, dont happen to have a pic of this bumper do yea, for condition? sucks i am in need of red lol

[Emilie@GZP]

I had a red one. Sold it a few weeks ago. I can pull the green one off the shelf tomorrow and snap some pictures for you no problem.

[93SlugTT]

Great! Thank you.

[JohnnyTurbo]

To the OP, diffuser looks cool until I saw it mounted UNDER the 2nd Gen t-bar. IMHO, the T-bar needs cut out like GZP did and then put in the diffuser. I like the way the GZP diffuser mounts, but, again IMHO, it needs one more diffuser channel, the ones they have seem too wide. Also, as a single shot owner, I'd like to see it go all the way to the right.

[Emilie@GZP]

To the OP, diffuser looks cool until I saw it mounted UNDER the 2nd Gen t-bar. IMHO, the T-bar needs cut out like GZP did and then put in the diffuser. I like the way the GZP diffuser mounts, but, again IMHO, it needs one more diffuser channel, the ones they have seem too wide. Also, as a single shot owner, I'd like to see it go all the way to the right.

I am the OP, I think you replied to this thread by accident, instead of the other diffuser thread...

Any wider, and you can't have tow hooks. It would be WAY too expensive, and would look very odd to extend it completely to one side to accommodate a single exhaust...

[Lancelot_GT]

Hey, has there been any updates to this? Or pics? :p

I might grab one of these this summer, if you're still making them of course. I just haven't decided if I want to make any changes to the rear or not, but I think it will go much better once I do my front end modifications.

[JohnnyTurbo]

I am the OP, I think you replied to this thread by accident, instead of the other diffuser thread...

Any wider, and you can't have tow hooks. It would be WAY too expensive, and would look very odd to extend it completely to one side to accommodate a single exhaust...

My bad, you are correct. With the droids little screen, I didn't realize I was on the wrong thread.

[Emilie@GZP]

Hey, has there been any updates to this? Or pics? :p

I might grab one of these this summer, if you're still making them of course. I just haven't decided if I want to make any changes to the rear or not, but I think it will go much better once I do my front end modifications.

Not really much to update, and we don't have any more pictures. It's looking like we will be getting my spyder to the body guy soon, once that car is done, I will have more pictures with the rear diffuser.

[slage]

very cool :D

[Nater3kgtVR4]

Umm That is a great product. The price though...Ouch. Is there a metal version Aluminum maybe for us budget minded folk?

[Emilie@GZP]

No, sorry. We just offer fiberglass (FRP) and carbon fiber.

[Lancelot_GT]

I'd very much like to add one of these to my car this summer. You keep these in stock right? Or are they build to order?