View Full Version : Just bought 19t's fromIPS
whitedevilstealth
11-26-2010, 09:06 PM
Got some 19t's from IPS's Black Friday Sale. I am running PTE 550's right now with an SAFC2,FMIC,Walbro 255,AFPR,IPS single exhaust, ect.... Anyway, do you guys think that the 550's can handle the 19t's on 17psi? If not can I get 680's or so and still use the SAFC2 to tune it?
Lithium
11-26-2010, 09:13 PM
depends on your fuel pressure, I would say your safe but I would start to look for a better piggyback or even a stand alone.
Atrosity
11-26-2010, 10:12 PM
Welcome to the IPS 19Ts club!
To start don't go standalone, you would hate having to spend a shop 1000s of dollars to tune your car when you can tune it yourself and that money can be spent on other parts
My friend cho is on SAFC2/SITC combo with water/meth injector and 660cc injection on EV03 16Gs so it is proven time and time again, you might able to boost that much psi however being on pump gas you would want to get timing control, if you can find a SITC for timing that would benefit you a lot, also you can up you fuel pressure around 52-53, that is what I did.
green-lantern
11-26-2010, 10:16 PM
Got some 19t's from IPS's Black Friday Sale. I am running PTE 550's right now with an SAFC2,FMIC,Walbro 255,AFPR,IPS single exhaust, ect.... Anyway, do you guys think that the 550's can handle the 19t's on 17psi? If not can I get 680's or so and still use the SAFC2 to tune it?
Yes I do, I think you will be fine as long as the fuel pump is hot wired.
whitedevilstealth
11-26-2010, 11:07 PM
Yes the walbro is hotwired
JasonY
11-26-2010, 11:18 PM
Pick up a water/meth kit and the 550's will be fine since you can spray about 100hp worth of methanol pretty easily and make big pump gas power to boot.
550's are good on gas only for about 550awhp, so they are plenty of injector for the entry level TD04's like the 19T's...
Jason
green-lantern
11-26-2010, 11:55 PM
Yes I do, I think you will be fine as long as the fuel pump is hot wired.
I should revise this by saying all cars are different. It really depends on the health of your engine ect. Different cars can handle more or less boost so just start low and see what it can do.
Chris@Rvengeperformance
11-27-2010, 12:46 AM
oh yeah they will be plenty for that boost.
I'm running enough fuel pressure for my injectors to be about 575cc and I'm running about 80% IDC at 16 PSI of boost at around 10.9 AFR. Plenty of room to lean out and lower IDC even further.
whitedevilstealth
11-27-2010, 01:25 AM
I was considering water/meth. I was looking at the snow performance stage 1 boost cooler but I dont think it comes with any safety features.
KeithMac
11-28-2010, 02:07 PM
Anything over 550`s and you want to be looking into dual pumps, my hotwire walbro is spent at 65% DC on the PTE 780`s.
even with 9b's, i wish i'd splurged on the denso over the walbro.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.