View Full Version : How bad is this? can it be welded/repaired?
GTOJOE
11-21-2010, 03:51 AM
So I was servicing the GTO today and noticed this on both front wheels. Both rear wheels had no signs of cracking but on the fronts 3 of the 5 spokes show signs of cracking on both wheels. Front left is the worst one.
Have also taken a pic of the whole wheel and the centre detail etc incase anyone can identify it. I don't think the centre caps are correct.
So if anyone knows what they are let me know so I can track down another pair.
http://i299.photobucket.com/albums/mm289/1STGENGTO/SNC00176Medium.jpg
http://i299.photobucket.com/albums/mm289/1STGENGTO/SNC00177Medium.jpg
http://i299.photobucket.com/albums/mm289/1STGENGTO/SNC00181Medium.jpg
http://i299.photobucket.com/albums/mm289/1STGENGTO/SNC00178Medium.jpg
http://i299.photobucket.com/albums/mm289/1STGENGTO/SNC00180Medium.jpg
http://i299.photobucket.com/albums/mm289/1STGENGTO/SNC00179Medium.jpg
blindmist
11-21-2010, 03:55 AM
Thats in a bad spot. These are aluminum alloy correct? If so, I wouldn't try to get it welded as they would never look right again. I could be wrong and am by no means an expert with metals.
GTOJOE
11-21-2010, 03:59 AM
They are alum alloy. I assume if they can be welded then they would have to have the clear stripped back welded then machined to make it look right then re-sprayed in clear. But as these are cast alloy i'm not sure how well they will take to welding or if it would even be safe.
blindmist
11-21-2010, 04:26 AM
They are alum alloy. I assume if they can be welded then they would have to have the clear stripped back welded then machined to make it look right then re-sprayed in clear. But as these are cast alloy i'm not sure how well they will take to welding or if it would even be safe.
Exactly. Plus with the money that you would have tied up into repairing 3/4, you might as well just find yourself a new set of wheels that you like.
Tell the mrs. you want new wheels for Xmas :p
OhioSpyderman
11-21-2010, 09:59 AM
Not only would I not attempt to repair them, I wouldn't drive on them either.
They're an accident waiting to happen (IMO).
Bob.
mcshooter
11-21-2010, 10:20 AM
bob is correct, dont take a chance. cast alum alloy can be tig welded but not all alum alloy castings are the same. dont risk a accident take them to a salvage yard ,
Austin@STM
11-21-2010, 02:56 PM
I wouldnt bother fixing them, if they are cracking that bad they probably arent rated for the weight of a 3000gt.
green-lantern
11-21-2010, 03:32 PM
Looks very dangerous.
RealMcCoy
11-21-2010, 04:00 PM
I wouldnt bother fixing them, if they are cracking that bad they probably arent rated for the weight of a 3000gt.
^^^ I agree...
Any aluminum wheel can be repaired. It's just an matter of economics... labor time is expensive. I wouldn't even bother picking up the phone to inquire unless the replacement cost is over $500 each, or they were irreplaceable.
PearlWhiteR/T
11-21-2010, 04:28 PM
Wow thats the first time I've seen that... pretty crazy. I wonder how much welding it would upset the balance of the wheel. If they're old probably not even worth the time or money as others have said. Throw on a set of stockers and find some new rims.
reallyxxxxxxloud
11-21-2010, 07:34 PM
That brand is very cheap and nasty... And its not the first time I've seen it either with that brand... Stay well clear and replace them!!! Sorry dude :(
mcshooter
11-21-2010, 10:43 PM
please dont take a chance. even if someone tells you he can weld it dont do it. aluminum when welded produces a oxide and the area were welded no longer has the orginal strengh.find another brand as these must of been of low quality.
GTOJOE
11-22-2010, 04:22 AM
I don't think they are from Koya as I have looked for them. A mate said he saw them in a car mag years ago and they were $500 each. The only other person to ever drive my car was this mate and he curb rashed them so he spent ages looking for replacements for me and found them in an old mag. They can't be sourced anymore. I like these wheels and I think they really suit the car. I'll contact Koya and see if they did make them. I haven't driven it since I saw this and won't until I find a replacement or solution.
GTOJOE
11-22-2010, 04:56 AM
Emailed Koya just incase they did make them. Their warranty states a lifetime gaurantee on structural defects.
wow that's the worst I've seen rims that have not disintergrated in an accident....did youhit a gutter?
GTOJOE
11-22-2010, 05:49 AM
Never hit a gutter in my life :p the car had some minor gutter rash when I got it and my mate hit a gutter but only on one side. Both fronts are cracking. Rear is fine. It's just wierd.
They could be cheapo knock offs of the Koyas?
That would explain the poor condition, who knows.
I'm sure they can at least shed some light on the matter one way or the other.
GTOJOE
11-22-2010, 07:32 PM
Got a reply from Koya. So looks like I'm off to get these tested on the weekend.
Hi Joseph,
Thanks for your email,
Yes, this wheel was released in 2005 and its call grip.
With the structure warranty you will have to go to a tyre store and take them to take the tyre off and spin the wheels on a balance machine to see if wheels are still perfect round.
I look foward to hearing form you
BEST REGARDS,
WILLIAM HSU
KOYA CORPORATION
J_Parker
11-22-2010, 08:07 PM
There are some shops out there that specialize in nothing but. What they would do is litterally cut all of the spoks out from the rim itself and weld them back in place, machine them down again etc etc. As far as I know it is a lenglthy and expensive process that usually only car collectors / Lamborghini or of the likes have done. It's not reallt worth it unless those wheels are extreamly expensive or rare as hell.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.