intake pressure test

[Caswell239]

I know its been talked about lost but i cant find it!! What all needs to be done when pressure testing the intake. I have a 3sx aluminum pressure tester that going in at the bubble. do i just disconnect and plug the line that runs from the back of the bubble to the rear valve cover and the pcv hose that runs from the lower plenum to the back of the front cover?
thanks,

Chad

[Caswell239]

okay i found the rob beck thread about his pressure testers and how to do it but do you have to plug the line on the lower plenum to front VC?

[mb7050]

how about posting all the info here ?

[Caswell239]

alright got it figured out. ended up with the BOV, BOV pipe-to-ypipe connection, bov recirc hole, BISS Upper and lower intake gaskets.

The bov recirc hole just had hockey tape over it and a clamp lol. The Upper Intake is leaking horribly but thats okay cuz im sure the intake will come off and again soon as i still cant find the answer to my noise. Ill post a how-to for the pressure test so its easily found tomorrow or monday.