View Full Version : door panels -color change?
BadHabit
11-19-2010, 02:39 PM
I have some Charcoal color door panels and would like them to be black,is there a particular type of die or specialized paint I can use to do it so it will not look like a rattle can?
Thanks in advance...BH
J-Groove
11-19-2010, 03:01 PM
I know Gatecrasher did a really clean two tone on his interior, but I don't remember what he used. But it was a few years back so he would be good to ask to see how well it has held up.
-John
x2xtreme360
11-19-2010, 03:10 PM
96-99 door panels were true black. I'm trying to locate some myself.
DrGonzo
11-19-2010, 04:59 PM
The vinyl on the doors is not pores enough to due. The Duplicolor rattle can dye sprays on nice but I wouldn't use it only anything that comes in constant contact with your hands. It wears down and then looks bad. I did my rear upper panels and pillar covers and they have held up for a couple years now.
stealthee
11-19-2010, 05:20 PM
SEM vinyl dye.
J_Parker
12-10-2010, 03:07 AM
I found wiping mmine with hasoline really helped the paint adhere to the vinyl, I used a Duplicolor fabric and vinyl dye that time. I've also used the product that Stealthee mentioned and it turned out very well.
Unknownvr4
12-10-2010, 12:33 PM
96-99 door panels were true black. I'm trying to locate some myself.
This.
Dont mess up a set of door panels if they are in good condition.
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.