View Full Version : A few misc. questions
GRSHOPR
11-18-2010, 01:46 PM
OK guys, gotta a few random questions for you:
1) Is there a difference between a NA and FI TPS?
2) I'd like to wire my cluster and interior dash lighting to be constantly on. What's the best way to go about that?
3) My seat belt springs don't seem to be as strong anymore. They can't really retract the loose seatbelt anymore. How would one fix that?
Thanks for the help!
DrGonzo
11-18-2010, 03:07 PM
1) No difference they are the same!
2) On the back of the dimmer switch there are three wires. Find which one goes to the lights and connect it to a constant power source. "Sorry I don't have my wiring diagrams in front of me!"
3) Pull the seat belt all the way out and wipe some Armour all on it. Don't get it on the part of the belt that touches you as it will stain your closes. Work it in and out and it will loosen up and retract. You have to do it every couple months to stop it from dragging.
GRSHOPR
11-18-2010, 04:40 PM
Gonzo, you are the SHIT! Thanks. Quick question about #2. The dimmer is on the rheostat? Not going crazy? Thanks again!!!
CoreyB
11-18-2010, 05:05 PM
The other thing about the seat belts is the solenoid release valve. They are designed to make the belt easy to move I think any time the key is off or something like that. Mine dont work as they should either. I havent looked into it though.
DrGonzo
11-18-2010, 05:29 PM
Correct dimmer is the rheostat.
GRSHOPR
11-18-2010, 07:18 PM
Well then this shit will be easy!! I have to pull the rheo to redo the lighting on it anyways!! Many thanks!
GTOJOE
11-20-2010, 02:48 AM
so the seatbelt is power assisted? cus when my immobilzer arms the seat belt auto retracts. Well it feels like that if your sitting in it and it goes off. it tugs on the belt. was just about to ask about this feature.
GRSHOPR
11-23-2010, 05:36 PM
OK, so most of that worked like a champ. Few issues though:
1) Does anyone use the seat belt guides attached to the seats?? I did the armor-all trick, but they still kind of lay out when the belts are run through the guide. Out of the guide they work like champs. Should I just get used to not using the guides?
2)I was determining which wire was the power, which the gauges, etc on the dimmer, all was going well. When I plugged the dimmer back in, nothing. No markers, no dash lighting, nothing. I've got heads, but nothing else. Thought it might be a fuse, so I checked all the fuses under the dash and they all looked fine. Am I missing something?
3) So I replaced my busted ass passenger side with another A/C (driver side) fan, as I already applied the hotwire to keep them constantly running. When I went to plug it in, it started running, even with no key in the ignition. The driver side one works just fine, turning on when the key is in the ignition, but the passenger side stays on no matter what. Anyone got input on that one?
GRSHOPR
11-24-2010, 08:12 PM
OK, so most of that worked like a champ. Few issues though:
1) Does anyone use the seat belt guides attached to the seats?? I did the armor-all trick, but they still kind of lay out when the belts are run through the guide. Out of the guide they work like champs. Should I just get used to not using the guides?
2)I was determining which wire was the power, which the gauges, etc on the dimmer, all was going well. When I plugged the dimmer back in, nothing. No markers, no dash lighting, nothing. I've got heads, but nothing else. Thought it might be a fuse, so I checked all the fuses under the dash and they all looked fine. Am I missing something?
3) So I replaced my busted ass passenger side with another A/C (driver side) fan, as I already applied the hotwire to keep them constantly running. When I went to plug it in, it started running, even with no key in the ignition. The driver side one works just fine, turning on when the key is in the ignition, but the passenger side stays on no matter what. Anyone got input on that one?
Scratch #2. Fixed it.
GRSHOPR
11-26-2010, 11:47 AM
No input on the other issues?
GRSHOPR
11-27-2010, 01:20 PM
Bump. It's getting pretty cold out there, want to get this fan thing figured before snow falls. Anyone got input?
GTOJOE
11-27-2010, 10:13 PM
you must have wired them up wrong. or the relay you are using is busted or something. remove your hot wire and start from scratch.
GRSHOPR
11-27-2010, 11:53 PM
I think the issue lies in the relay. Is there always supposed to be power to any of the terminals on either the high or low relays, when the key isn't in the ignition?
GTOJOE
11-28-2010, 01:01 AM
the way the relay should work is that when you turn the key it powers the coil which switches the relay and provides power to the fan. Basically an on off switch controlled by the relay. So if it's always on your relay is the wrong type. ie always on instead of always off or you have wired it wrong. If it is the wrong type and it's wired right then it should turn off when you start the car. If it's on regardless of ignition then you have wired it wrong. Or the relay is just faulty and stuck in the on position.
GRSHOPR
11-28-2010, 10:10 PM
So then there should be a pin on the relay that always has power to it? Essentially there are two circuits, one to power the fan, one to power the relay switch. Should there always be power to one of the pins for the fan?? Or did I just wire it incorrectly?? There is power to pin 5 on both High and Low relays.
GTOJOE
11-28-2010, 10:20 PM
if there is a 5th pin in the middle ignore it. there should be 2 wires for the relay power that only powers up when you turn the car on. The other 2 wires are for the power to the fan. One should have constant 12volts from the battery. ie a single wire from the battery [with an inline fuse] to the pin on the relay. The other pin will go direct to the fan. So when the power is applied to the relay circuit the relay switches and completes the circuit to the fan. If you have power to the fan at all times your relay is stuck on or somehow you by-passed the relay and applied power direct to the fan. Or the relay is the wrong type. Most relays switch on when you apply power. Some however are always on and switch off when power is applied to the relay.
GRSHOPR
11-28-2010, 10:34 PM
Yeah, pin 2 is the dead one. Pin 5 is the constant source, pin 4 the fan ground, and according to the schematic, and pins 1 and 3 are the relay. My thought is that maybe the relay is busted to the closed position?? But if I did the hotwire, wouldn't that constantly keep the relay to the closed position, when working correctly and the key is in the ignition?? Which would indicate that the relay is fused to the closed circuit position?
GTOJOE
11-28-2010, 10:53 PM
If it's always providing power to the fan regardless of the possition of the ignition key then yes the relay is stuck in the on positition. Or you have mixed up the pins somehow.
GRSHOPR
11-28-2010, 10:57 PM
Which doesn't seem likely, due to the fact that I didn't mess with anything in that fuse box. Anywhere I can safely cannibalize a replacement relay to test it out on the car??
GTOJOE
11-28-2010, 11:09 PM
Just go buy another relay. Will cost about $5 from an electrical wholesaler or auto elec. I'm not familiar with the fan hotwire mod process. I assumed you just ran new wires to the fan and wired up a relay. This is my recommendation rather than using the stock wiring. This way it's easily reversed by removing your wires and connecting the old ones back up.
GRSHOPR
11-28-2010, 11:18 PM
Ideally i'd like to find one to test with first, before I bother with that. What would be the benefits of running new wiring?? I know the stock wiring works, as it did before I put in the new motor.
GTOJOE
11-28-2010, 11:53 PM
If you run new wiring you know it can be trusted. Our cars are getting old now and the wiring is notorious for having issues. If you really need to swap the relay to test it just locate another relay in the engine bay that is identical to the fan relay and swap them.
GRSHOPR
11-29-2010, 12:04 AM
That's what I was wondering- where can I find another?
GTOJOE
11-29-2010, 12:21 AM
I'm unfamiliar with the fan relay so unfotunetly I can't help you there. Just check the numbers on top and then go hunting for others with the same number. Most relays in the engine bay main fuse box are the same. However I'm at work so can't check this to be sure.
GRSHOPR
11-29-2010, 12:26 AM
No worries man. Thanks for your help so far. I'll go hunting. One last question. The high and low relays are, I assume, the same. I will verify this shortly jus to make sure, but if memory serves, the hotwire runs both fans on high at all times. Does that mean that the power is running through both relays, or just the high relay??
GTOJOE
11-29-2010, 03:00 AM
I assume just the high relay is being used. But I haven't done the mod or even read the instructions. However I expect the relays for both are the same.
i seem to recall someone saying something about disassembling the belt assembly & cleaning and lubricating it--and something about winding it an extra turn or so...
i would use the belt-stays. without them, the belt is liable to slide to an inappropriate place during a crash, causing you injury or worse.
GRSHOPR
11-29-2010, 04:24 PM
Thanks for the warning. Maybe I'll try lubing the straps up with armor all a bit more first. I'd loathe having to disassemble the belts.
GRSHOPR
11-29-2010, 05:35 PM
OK, so I found a rather amusing tidbit while trying to isolate the relays. I found another known good relay, tried replacing both the high and low relays, and then, on a whim, I pulled out both relays. And still the fan spun. I obviously somehow bypassed the relays altogether. And I have no idea how, especially since I didn't even touch that fuse box. Anyone have suggestions or ideas on this crazy thing?
GTOJOE
11-29-2010, 08:01 PM
Seeing as you have used a different fan than origional the wiring might be different. Does the fan have 2 or 3 wires to it? [I can;t remember] if it's 3 then the fan has it's own relay built in and the 3rd wire is a trigger wire for this in-built relay. So perhaps the wiring is the wrong way around and your power and trigger wires are the wrong way around. Other than that i'm stumped. So I go back to my other suggestion. Run your own wiring :lol:
GRSHOPR
11-29-2010, 08:48 PM
What sweet irony. But there are four wires. where should I run it from?
GTOJOE
11-29-2010, 09:03 PM
if there are 4 then 2 might be the trigger for the built in relay the other 2 are power. so unplug the connector and test the voltage. 2 should be earth and 1 should have constant power the other should give power when the ac is on only. Once you have worked this out you will have to compare it to the other AC fan and work out which wires do what. Sometimes the main power wire will be thicker os it should be easy to work out whcih set/pair is what.
Edit: ignore the AC comment. You are connecting an AC fan to the passenger side so the AC on will have no effect on the passenger curcuit.
GRSHOPR
11-30-2010, 03:06 PM
So, if there are 2 grounds (which there are), and 2 other wires (which there are), and one of them has constant power and the other does not (which they do), then I can ignore the non-powered wire and just focus on wiring up the single powered wire?
GTOJOE
11-30-2010, 07:25 PM
This sounds right. 2 grounds, one constant power and one trigger wire with no power. However this trigger wire should turn on when the car is on and reaches a temperature high enough that the fan turns on.
So check the wiring on the other fan and see which pin corresponds to the constant power and the 2 earths etc. Once you know the correct orientation for the fan swap the wires around.
TT4ME
11-30-2010, 08:03 PM
I seriously doubt the stays were designed to support the forces of a crash. I've had belts slip out often with regular use. My vote:not a safety feature.
I seriously doubt the stays were designed to support the forces of a crash. I've had belts slip out often with regular use. My vote:not a safety feature.
they don't support the forces of a crash; they are guides, not hard mount points for a belt. ideally, we'd have seats with the belts built in; but that's now how the car was designed. all the guides do is keep the seatbelt from sliding too far up or down in the event of a crash.
GRSHOPR
11-30-2010, 10:07 PM
The only problem with that is that the hot wire is supplying to power to both the trigger wires, or at least it should, constantly.
GTOJOE
11-30-2010, 11:20 PM
The only problem with that is that the hot wire is supplying to power to both the trigger wires, or at least it should, constantly.
Are you saying that that is what it IS doing or that is what it would be doing to get the issues you have?
GTOJOE
11-30-2010, 11:25 PM
on your current ac fan check the volatages on each pin and right down [or even draw the socket] what pin has what voltage or grd etc then use that same diagram to rewire your passenger fan. So seeing as it's the same as the ac fan the socket layout will be the same. so check the constant voltage from the plug/harness and connnect to the right plug on the fan. connect the 2 grounds to the 2 ground pins and the last one should be the trigger.
GTOJOE
11-30-2010, 11:36 PM
actually... test this. does your ac fan have a constant power wire even going to it? it seems like a strange way to set it up if there is already a hi and lo speed relay. Perhaps the 4 wires are infact power. earth for power and the other 2 wires could be a speed sensor to alert the computer if it stops etc. Perhaps someone else can confirm this?
Does the fan have it's own relay built in? maybe i'm leading you in the wrong direction.
If the fan doesn't have a relay built in you need to start looking at bad wiring again.
GRSHOPR
12-01-2010, 12:17 AM
yeah, lol, I'll hold off til we know for sure.
GTOJOE
12-01-2010, 09:11 AM
When you swapped the fan over did you just swap the actual fan or the whole fan & shroud assembly? alos what did you do about the harness to the fan. Because the way I understand it the AC fan has 4 wires to it. One for hi one ofr low and 2 earths. The radiator fan only has 2 wires to the fan. Power and earth. However the plug has 6 pins/wires as it also has the 2 temp sensors connected.
So in theory you should be able to wire the ac fan up to the radiator fan directly to the hi speed in on the ac fan and one of the earths. I can't see anywhere on the diagram to explain how you have constant power to the fan.
GRSHOPR
12-01-2010, 11:10 AM
I replaced the entire shroud/assembly. I rewired the temp sensors in elsewhere, independent of the plug, and spliced in a '94 plug, so it only has 4 wires in the plug.
GTOJOE
12-01-2010, 06:43 PM
From what I could tell there was 6 wires in the origional plug. Is this correct? 2 for fan, 2 each for temp sensors?
GRSHOPR
12-01-2010, 06:51 PM
originally, there were six, 1 for each sensor, 4 for the fan. I wired the sensors independently, and spliced in the 94 plug so I could plug the fan into the existing electrical system.
GTOJOE
12-01-2010, 06:58 PM
ok that's strange cus in the wiring diagram I can only see 2 wires. Maybe it is the same setup as the AC fan. 2 power and 2 earth.
If you remove both ho and lo relays and still get constant power something is wrong. You need to trace your wiring. On your plugs for both you shouldn't get power till the ignition is on and for the AC won't turn on till the AC clutch engages.
I'm stumped. run new wiring :p
GRSHOPR
12-01-2010, 11:09 PM
Does power for the fan at anytime run through plug A-67?
GTOJOE
12-01-2010, 11:30 PM
I'll check the diagram tonight. At work at the moment.
GRSHOPR
12-02-2010, 12:59 AM
Thanks. No rush. I have another random question too. My window buttons won't work. The lock isn't on, and they aren't even lighting up. I assume a fuse, but which one? Otherwise I'll go through them one by one.
GTOJOE
12-02-2010, 01:30 AM
I'll check the manual for that as well but prob just as easy to check them all.
GTOJOE
12-02-2010, 08:01 AM
Does power for the fan at anytime run through plug A-67?
Can't see A67 being involved anywhere.
GTOJOE
12-02-2010, 08:31 AM
OK this is a bizare setup. to me it looks like the AC fan is switching on the positive side and has 2x power in and 2x earth. One for lo and one for hi. It must also have a built in resitor or 2 differnt coils in order to get the 2 different speeds as there is no resitor in the diagram.
Now this is where it get's strange. It looke like the radiator fan is switching on the negative/earth side. So there is a constant power to the fan then the relay switches the negative so it then opens the circuit. Which would explain the constant power to the fan. The 2 relays then complete the power loop at full power and the other relay completes the circuit wiht a resistor in series to reduce the speed/power. Sooooo they are not simply swapable.
AC Fan
http://i299.photobucket.com/albums/mm289/1STGENGTO/ACfancircuit.jpg
Radiator Fan
http://i299.photobucket.com/albums/mm289/1STGENGTO/Radiatorfancircuit.jpg
The only way I can see this working is if you wire in another relay. You would need to cut the constant power wire close to the fan as well as the negative wire. Then wire a relay up so the negative is the trigger [so when the ign is on the neg wire will complete a circuit] which would then switch the realy whcih is wired up to the constant power. So when the ign is on it completes the negative circuit which powers the coil in the relay which then switches the constant power on and the fan runs at full speed constantly. Turn ignition off and the coil loses power which switches the relay off and the constant power is then off. It's actually very simple now that I properly understand the circuit diagram.
Or the easy solution.... just fit the proper fan :lol:
GRSHOPR
12-02-2010, 12:52 PM
Lol, I'm aiming for larger turbos, so a proper fan doesn't seem possible, plus the fact that others have done this before, makes it seem like it's doable. Are we back to just wiring in a new circuit for this thing?? What I don't understand though, is how have others just plugged and played, so to speak with this setup? And don't bother looking in the manual for that fuse. I was just curious if you knew it off the top of your head. Thanks.
GRSHOPR
12-02-2010, 05:41 PM
OK, scratch the windows issue. Remember that relay I pulled to test the fan ones?? Yeah.... they work now.
GTOJOE
12-02-2010, 06:51 PM
LOL. nice one. Well unless I have missunderstood the circuit diagrm these things are definetly NOT plug and play. So they must be modifying the wiring somehow. Maybe search for a DIY/How-to thread on this mod. But also as I said above just simply add a relay in at the fan and it will do what you want. You just need to cut the 2 wires. Put a blade connector on each wire and plug it into a relay. Just need a standard automotive relay. Should set you back $5 and 5 mins work.
GRSHOPR
12-12-2010, 09:10 PM
Lol, just had to jump in there, eh Joe??
GTOJOE
12-12-2010, 09:29 PM
Lol, just had to jump in there, eh Joe??
Just trying to help :p
GRSHOPR
12-13-2010, 11:36 AM
Hahahaha, I know. Just messing with ya. I appreciate the help.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.