View Full Version : Gauge mounting
x2xtreme360
11-17-2010, 02:11 PM
Post some gauge mounting pics.
I am going to end up with 6 total. I've thought about the apillar, but I really don't want it.
I've really been looking into the custom 3SX gauge bezel. Post up if you have one. Does the steering wheel get in the way?
Also thought about turning the useless ash tray into a mount for one gauge... maybe water temp.
B-Man
11-17-2010, 02:19 PM
I stuck mine on the windshield right next to the pillar. I only have on so it's pretty far out of line of site, but still convenient to look at. It's no more distracting than a parking sticker. I'll try and take a cell pic later today.
gltasn
11-17-2010, 02:28 PM
i love my vent mount from weezil but it took over a month to get, also 3sx sells a metal one.http://s287.photobucket.com/albums/ll126/gltasn/?action=view¤t=tunes032.flv sorry for vid not pic but im lazy and had the vid from a diagnostics run.
x2xtreme360
11-17-2010, 02:30 PM
Did you fabricate a block off panel for when you run the heat or AC?
Atrosity
11-17-2010, 02:30 PM
I have a gauge pod and I do not like it at all.
This one is my absolute favorite but I don't know where I can find it.
http://i45.photobucket.com/albums/f100/jsauto/Mitsubishi%20GTO/DSC02619.jpg
This is my second choice
http://www.3sx.com/store/catalog/gauge-pod-52x3-replace-center-air-vents-05-600l.jpg
My Third Choice
http://www.3sx.com/store/catalog/gauge-pod-dual-main-cluster-bezel-fiberglass-10-600l.jpg
gltasn
11-17-2010, 03:51 PM
Did you fabricate a block off panel for when you run the heat or AC?
just stuffed it real good with polyfill.
mb3000
11-17-2010, 08:05 PM
I have a gauge pod and I do not like it at all.
This one is my absolute favorite but I don't know where I can find it.
http://i45.photobucket.com/albums/f100/jsauto/Mitsubishi%20GTO/DSC02619.jpg
^If anyone knows where to get this post up!!!
Zero-X3
11-18-2010, 11:43 PM
I have the piller pod. 3 pod from cianci and yes it does get int the way you have about 2 or 3 inches from the steering wheel.
gltasn
11-19-2010, 09:33 AM
i had a pillar pod at one time(not cianci) and would hit it with my hands when driving with spirit. so its outa here!
HLxDrummer
11-19-2010, 10:02 AM
What all gauges are you gunna get? My favorite setup is replacing the center three with fuel pressure, oil pressure, coolant temp, then put digital wideband readout on steering column and boost in single A pillar pod.
aaronatstate
11-19-2010, 10:13 AM
I replaced the center three with boost, oil pressure, water temp, have a WB02 in a single a-pillar, and oil temp down under the radio next to my boost controller. I'll post pics up when I get home from work.
mcshooter
11-19-2010, 11:46 AM
my son has his wideband 02 gage where the tape player was. he cut a piece of thin carbon fiber out to fit the gage in and secured the gage and fiber cover with a silicon adhesive, you could put a gage in on either end. he replaced the three factory gages with greddy gages. you could fit a exhaust temp gage in the other side of the carbon fiber panel.
Chris@Rvengeperformance
11-19-2010, 06:57 PM
I replaced the 3 center gauges with greddy replacements and put the wideband down under the radio along side the hks evc 5 using a weevil plate. I then run the scanmaster on the column and can see real time knock and wideband.
None of it annoys me and it almost looks stock. If you didn't have a boost controller display you could use 2 or even 3 gauges below the radio.
Once you commit to replacing the factory gauges it helps a lot.
aaronatstate
11-19-2010, 07:58 PM
http://i210.photobucket.com/albums/bb53/aaronatstate/Stealth%20Upgrades%20Fall%2008/DSC_8153.jpg
http://i210.photobucket.com/albums/bb53/aaronatstate/Spun%20Bearing%20Stuff/DSC_9770.jpg
x2xtreme360
11-19-2010, 11:25 PM
What all gauges are you gunna get? My favorite setup is replacing the center three with fuel pressure, oil pressure, coolant temp, then put digital wideband readout on steering column and boost in single A pillar pod.
lmao it's funny you say that because I actually am doing the fuel pressure, oil temp, and water temp in the center. I'm seriously considering the center vent for my boost and oil pressure and wideband since I don't use the AC (it doesn't work) and the car is a summer car (no heat required).
Going with STRI Xline gauges. Already purchased three.
Get a Computer screen and have it display them on it....you could even have the whole guage change colour or flash if it's way out of expected norms.
Frostedbutts
11-24-2010, 12:52 AM
This one is my absolute favorite but I don't know where I can find it.
http://i45.photobucket.com/albums/f100/jsauto/Mitsubishi%20GTO/DSC02619.jpg
Anyone know where to get this?
arthur92710
11-24-2010, 01:43 AM
How about this?
http://www.youtube.com/watch?v=zMAvVtXP-AA&feature=player_embedded
Anyone know where to get this?
I've got something similar on my MR. It was already on the car when I imported it from Japan, so no idea who sells them.
I've got something similar on my MR. It was already on the car when I imported it from Japan, so no idea who sells them.
hrmm maybe you can sell those gauges, titanium shift knob, CF dial surround and the momo wheel to me as a package haha :p
Seriously though, looks sweet.
Atrosity
11-24-2010, 04:57 AM
I've got something similar on my MR. It was already on the car when I imported it from Japan, so no idea who sells them.
Wow that one is even BETTER! it makes the driver seat feel like it is even more of a cockpit! I need it!
Polygon
11-24-2010, 01:10 PM
^If anyone knows where to get this post up!!!
And preferably for a LHD as that car is a RHD.
Flamer
11-24-2010, 03:28 PM
My Third Choice
http://www.3sx.com/store/catalog/gauge-pod-dual-main-cluster-bezel-fiberglass-10-600l.jpg
The best one FOR SURE. If anyone has one of these for sale in like new condition, PM ME.
Atrosity
11-24-2010, 03:32 PM
The best one FOR SURE. If anyone has one of these for sale in like new condition, PM ME.
It's called 3SX.
hrmm maybe you can sell those gauges, titanium shift knob, CF dial surround and the momo wheel to me as a package haha :p
Seriously though, looks sweet.
Thanks :D
I like how at first glance, it can appear to be stock especially to someone who doesn't know that much about GTO's, which is pretty much everyone I know :Doh:lol
Atrosity
11-25-2010, 02:31 AM
It looks like fiberglass or some kinda of plastic.
mb3000
11-25-2010, 11:04 AM
Looks like plastic to me.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.