PDA

View Full Version : CAD/CAI for the DD



3000GTPro
11-15-2010, 08:15 AM
To be honest, I don't know if anyone has come up with this yet, but I always wanted to get a CAI without the worry of sucking up water if I ever had to drive in the rain. I wanted something that could be easily disconnected at will, and without having to move the air filter, or use any tools to do so. It would also be something anyone can put together with a few simple tools that I'm sure most of us if not all of us have access to, as well as being a design that requires little to no modification to the body or frame work at all. And I think I have found a way to do it.

I prefer to call it a CAD for Cold Air Duct for the reason the filter is in the factory location, but still sucks in air as cold air intake.

First I used a $10 extend-able aluminum tubing from Home Depot to get and idea of the best way to route 3-4 diameter piping to the air filter, and the overall length of the piping.
http://i75.photobucket.com/albums/i313/degamer/My%20Car/ColdAirDuctprototypefitment1.jpg
http://i75.photobucket.com/albums/i313/degamer/My%20Car/ColdAirDuctprototypefitment2.jpg
http://i75.photobucket.com/albums/i313/degamer/My%20Car/ColdAirDuctprototypefitment3.jpg

Made a custom sleeve from 2 slabs of HDPE plastic cut to shape to fit over the bumper inlet.
http://i75.photobucket.com/albums/i313/degamer/My%20Car/CADAdapterFitment01.jpg
http://i75.photobucket.com/albums/i313/degamer/My%20Car/CADAdapterFitment02.jpg

Got all the intake hardware I needed from Spectre Performance through my local Pep Boys (cheaper than ordering through their website for me), and got a Weapon-R bottom feed coolant tank to make room for the larger 4 inch diameter flex tubing. I decided to go with 4 inches do to the air resistance that comes with the unavoidable 4 90 degree turns I had to make to connect it to my stock intake.
http://i75.photobucket.com/albums/i313/degamer/My%20Car/CADIFinished001.jpg
http://i75.photobucket.com/albums/i313/degamer/My%20Car/CADIFinished002.jpg
http://i75.photobucket.com/albums/i313/degamer/My%20Car/CADIFinished003.jpg

All of this can be done for about the same or less the the DNP Intake you could buy from 3SX after shipping (apparently they stopped selling it). You can use it various different ways thanks to some of the Spectre products that I have never seen anywhere else, so just about anyone should be able to do their CAI based on their needs from it. This design was inspired by the custom CAI design I saw in Eric's car seen on 3SX. The only thing left to do is get the car on a dyno someday, and see what the difference is. The only results I have is from driving the car on the street, and though small they may be, there is a difference.

SOHC
11-28-2010, 03:17 PM
That looks cool. I'm wondering since I already have a short ram intake will a cold air wall/box benefit me in any way?

I was looking at these two.

http://cgi.ebay.com/ebaymotors/3000gt-Stealth-turbo-n-a-Aluminum-cold-air-wall-/300352889771?pt=Motors_Car_Truck_Parts_Accessories&hash=item45ee6d63ab

http://cgi.ebay.com/ebaymotors/3000gt-Stealth-turbo-n-a-Aluminum-cold-air-box-_W0QQcmdZViewItemQQhashZitem45ee6d63e4QQitemZ30035 2889828QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries

stealthee
11-28-2010, 03:26 PM
You are not going to see any significant gains with intake mods on a NA.

3000GTPro
11-29-2010, 07:02 AM
That looks cool. I'm wondering since I already have a short ram intake will a cold air wall/box benefit me in any way?

I was looking at these two.

http://cgi.ebay.com/ebaymotors/3000gt-Stealth-turbo-n-a-Aluminum-cold-air-wall-/300352889771?pt=Motors_Car_Truck_Parts_Accessories&hash=item45ee6d63ab

http://cgi.ebay.com/ebaymotors/3000gt-Stealth-turbo-n-a-Aluminum-cold-air-box-_W0QQcmdZViewItemQQhashZitem45ee6d63e4QQitemZ30035 2889828QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries
I suppose the more enclosed box could possibly do about as much as the stock airbox, but all the air is still coming from the same place by itself. I'm sure it could do some kind of good for you with the CAI/CAD, but you wont really notice it any more, if not less than I do in trying to keep the whole thing sealed.


You are not going to see any significant gains with intake mods on a NA.

Not sure if you're replying to me or SOHC, but I already said that it's not much. I'm just curious to see what it is doing for me.

stealthee
11-29-2010, 07:06 AM
Its a general response to the whole thread. You are gaining almost nothing.

3000GTPro
11-29-2010, 07:23 AM
I feel it does something to make it worth while, when you compare it to everything else out there for intakes.

stealthee
11-29-2010, 07:55 PM
I have had a true cold air intake and it does nothing. I ran at the track and ran identical times with a CAI and with a stock intake with an open element filter.

MR2
11-30-2010, 06:34 AM
I run a cold air intake on my car...only helped in summer stop start traffic, instead of going to the front of the bumper it squish's down beside the radiator and sucks the pre pressurised air from the front air dam(in theory)

3000GTPro
12-05-2010, 08:13 AM
I have had a true cold air intake and it does nothing. I ran at the track and ran identical times with a CAI and with a stock intake with an open element filter.

I can see why you wouldn't have seen much if any difference on the track, because it really is a VERY small difference. However, maybe the reason I am seeing a small difference and you didn't, is because I have done something different than putting the filter down there. I have yet to see anyone make any adapter to catch the air flowing through that area of the bumper. Maybe it's the amount of air that you can get in there, more than the temperature since our cars are computerized to adjust to the temp differences, and may not run as hot as the TT cars do.

stealthee
12-05-2010, 11:32 AM
You are still not feeling a difference. You are not getting more air than a CAI would either. Its all placebo.

mb3000
12-05-2010, 08:34 PM
Its all in your head. You want it to work and make a difference; so whenever you strapped it down on the "butt dyno" you claim, and truely believe that it works. When in reality you might have gained a minute amount of horsepower, which is most likely identical to the amount of hp gained from taking off the stock airbox you have and replacing it with an aftermarket air filter. Much simpler IMO.

toddrs93
12-09-2010, 11:00 PM
You are still not feeling a difference. You are not getting more air than a CAI would either. Its all placebo.

Haha I'm gonna market one and call it the OBECALP

stealthee
12-09-2010, 11:15 PM
OMG I am totally in for one. :D

MR2
12-09-2010, 11:22 PM
So, your saying that it's better to just have a pod in the engine bay than bother to route some air in through the front air damn?

what does the stock computer adjust based on the IAT sensor ? at what temperatures does it make adjustments?

3000GTPro
12-10-2010, 02:11 AM
Its all in your head. You want it to work and make a difference; so whenever you strapped it down on the "butt dyno" you claim, and truely believe that it works. When in reality you might have gained a minute amount of horsepower, which is most likely identical to the amount of hp gained from taking off the stock airbox you have and replacing it with an aftermarket air filter. Much simpler IMO.

No, I'm aware that it's very small. I don't feel much difference, but there is a difference compared to the OEM intake box, and I'm not even using a drop in K&N filter yet. I'm not sure how much better it is (if any) than the open element filter, since it has been a while since I have used one.

stealthee
12-10-2010, 07:05 AM
Someone could secretly remove your "cai" and you would never notice the difference. You want there to be a difference, so again you think you feel one. You cannot feel 1-2crank horsepower. You didn't even gain a full horsepower at the wheels and that is IMPOSSIBLE to notice.

mb3000
12-10-2010, 04:50 PM
No, I'm aware that it's very small. I don't feel much difference, but there is a difference compared to the OEM intake box, and I'm not even using a drop in K&N filter yet. I'm not sure how much better it is (if any) than the open element filter, since it has been a while since I have used one.

You won't feel the difference of the K&N FIPK (Rip off) ether. The only thing it will do is allow you to hear it sucking in air at low rpm's. Virtually no performance gains.