PDA

View Full Version : Bad MAF?



FstAsVR4
11-13-2010, 08:36 PM
My car will not run with it plugged in but as soon as you unplug it, she idles perfectly fine a little rich but fine. Do I have a mad MAF or am I missing something?

CoreyB
11-13-2010, 09:16 PM
In my experience this does mean the MAF is bad.

GTOJOE
11-13-2010, 09:38 PM
If your MAF is bad it should throw a CEL. When you say it doesn;t run does it not start or does it idle out?

jbuhrman
11-13-2010, 09:40 PM
I would suggest MAF, as I just seen this on a car last night...

Your in the FL area so you have afew people you can get a working MAF off of either be for testing or replacement

Atrosity
11-13-2010, 09:48 PM
:smartie:

I was with jbuhrman last night when this happened to one of the socal3s members and I knew what it was instantly because my maf was bad and did this same symptom prior.

jbuhrman
11-13-2010, 10:47 PM
:smartie:

I was with jbuhrman last night when this happened to one of the socal3s members and I knew what it was instantly because my maf was bad and did this same symptom prior.

No Homo though of course

FstAsVR4
11-13-2010, 11:25 PM
Alright thanks, my CEL is on but it's normally on since I have no cats and such. I also can't find where to plug in one of my o2 sensors so that would also throw a CEL but thanks everybody I will switch it out and see how it goes.

RealMcCoy
11-13-2010, 11:57 PM
You also get the same symptoms (bad maf reading) when you blow an IC pipe... Have you checked for leaks?

Polygon
11-14-2010, 02:18 AM
If your MAF is bad it should throw a CEL. When you say it doesn;t run does it not start or does it idle out?

Not necessarily. My MAF went bad but didn't throw a CEL.

CoreyB
11-14-2010, 04:54 PM
You also get the same symptoms (bad maf reading) when you blow an IC pipe... Have you checked for leaks?

This is true, I overlooked that.

Roybatty
11-15-2010, 10:20 AM
Not necessarily. My MAF went bad but didn't throw a CEL.

+1, Perhaps its a 1g issue, I have a 91 TT also

Atrosity
11-15-2010, 10:26 AM
Not necessarily. My MAF went bad but didn't throw a CEL.

Correct I have seen this multiple times, it does not always throw a CEL.

FstAsVR4
11-16-2010, 09:34 PM
No there's no IC pipes off, that I know of...As I am putting this thing together and nearing completion of this big project I keep running into more and more problems. I think I need a new platform.

TUFFTR
11-16-2010, 11:36 PM
Happened to me with massive vac leaks. Find vac leaks first!