PDA

View Full Version : My N/A is fast. :)



Amphiron
11-11-2010, 09:43 PM
Driving my car after the rebuild has been wonderful. 450 miles on her and I took it out tonight and opened it up a bit. It throws me back in the seat very well, MUCH more than I expected. I still need to fix the intake leak and exhaust leak. Now do these come standard with aluminum pistons? They came with the rebuild kit but I never compared them to the old ones. Maybe thats why it feels so much faster or maybe its because I don't have leaky seats anymore?

CoreyB
11-11-2010, 09:45 PM
They are stock cast aluminum pistons. You are probably just feeling a healthy engine. Congrats and enjoy.

Amphiron
11-11-2010, 09:51 PM
Can't wait until I get a shift kit and a single turbo, I can't imagine how fast it will be then.... So close to spending all my Christmas and engagement ring savings on them hmm... girlfriend or boost. ugh.

CoreyB
11-11-2010, 09:55 PM
Boost wont come cheap or without headache. Marry your girl, make your car a project and then go for it. Just my opinion of course.

CoopKill
11-11-2010, 10:03 PM
x2 on that

Amphiron
11-11-2010, 10:04 PM
I think I can do a single turbo build for around 2 grand that will put out up to 600 fwhp using used parts. I guess I can wait another year.

CoreyB
11-11-2010, 10:15 PM
Sounds good but I would like to see your plan for getting 600 FWHP for 2k. Dont forget you engine isnt really capable of producing that kind of power in its stock form, not trying to dis it at all. On top of that you will need fuel control which can get expensive. You would need bigger injectors, a fuel controler, a much better than stock pump (Maybe a single walbro but not sure) and you would like likely need a meth injection kit. If you have a plan plan to do this for 2k please share it. I am not trying to call you out at all just curious as to how you would do it.

stealthee
11-11-2010, 10:20 PM
Single turbo would cost more than a TT conversion. Don't try to reinvent the wheel. You can buy stock TT parts and make your car a TT for far cheaper and more reliably than any single turbo set up.

Amphiron
11-11-2010, 10:35 PM
http://www.3sgto.org/showthread.php?1439-Single-turbo-kit
I was thinking this plus a good used AEM standalone, wideband, 450cc injectors and go pull some side mounts off a talon at the local junk yard plus other odds and ends should come out to be about $2,000. But I think a HX50 is only gonna bring me to about 400whp which is good for 2grand. I exaggerated a bit on the 600hp after adding it all up I thought maybe I could afford a better turbo.

CoreyB
11-11-2010, 10:44 PM
If you can pull it off I am with ya 100%. I love junk yard builds man, thats the way to do it IMO but you still need to make sure its a safe build and wont just detonate and blow.

TUFFTR
11-11-2010, 10:53 PM
Or put a 3.5L in and you won't need to worry about boost leak, extra oil lines and leaks, extra water lines and leaks, more hose clamps and intake piping and all that crap.....niceeeee and simple.

Amphiron
11-11-2010, 10:57 PM
If you can pull it off I am with ya 100%. I love junk yard builds man, thats the way to do it IMO but you still need to make sure its a safe build and wont just detonate and blow.

Ah yeah, thats why I'm going with a nice standalone wideband etc. I'm gonna get that first and figured out before I even put the turbo on, get used to it and get a nice tune on my N/A then go boost. I'm not really sure how to tune, but I know it don't involve setting it to 25psi and lean as possible. Always watch knock etc. I still have months of reading to do before I'd even spend a penny on it, but if I can learn to rebuild a engine here, I can learn to boost it tune it.


Or put a 3.5L in and you won't need to worry about boost leak, extra oil lines and leaks, extra water lines and leaks, more hose clamps and intake piping and all that crap.....niceeeee and simple.

If I were to do that i'd do it junkyard stroker style. That sounds really wrong lol. I'd still go boost too, despite the countless hours of research i've concluded the only way to get 300+hp of out these engines at the wheels is to use forced induction. And it's going to stay that way until someone comes out with direct injection heads and a controller for it.

Unknownvr4
11-11-2010, 11:13 PM
http://www.3sgto.org/showthread.php?1439-Single-turbo-kit
I was thinking this plus a good used AEM standalone, wideband, 450cc injectors and go pull some side mounts off a talon at the local junk yard plus other odds and ends should come out to be about $2,000. But I think a HX50 is only gonna bring me to about 400whp which is good for 2grand. I exaggerated a bit on the 600hp after adding it all up I thought maybe I could afford a better turbo.

I had 680cc injectors and i think the hx50 is good for dumb abouts of power :)

TUFFTR
11-11-2010, 11:18 PM
Ah yeah, thats why I'm going with a nice standalone wideband etc. I'm gonna get that first and figured out before I even put the turbo on, get used to it and get a nice tune on my N/A then go boost. I'm not really sure how to tune, but I know it don't involve setting it to 25psi and lean as possible. Always watch knock etc. I still have months of reading to do before I'd even spend a penny on it, but if I can learn to rebuild a engine here, I can learn to boost it tune it.



If I were to do that i'd do it junkyard stroker style. That sounds really wrong lol. I'd still go boost too, despite the countless hours of research i've concluded the only way to get 300+hp of out these engines at the wheels is to use forced induction. And it's going to stay that way until someone comes out with direct injection heads and a controller for it.

300HP at the wheels from a 3L N/A in these motors is almost....unheard of?!
I'm aiming for 240HP at the front in my NA 3.5L early next year.....see how we go I guess.

Amphiron
11-11-2010, 11:20 PM
I had 680cc injectors and i think the hx50 is good for dumb abouts of power :)

Well I hope your kits still available a year from now! lol

Amphiron
11-11-2010, 11:53 PM
300HP at the wheels from a 3L N/A in these motors is almost....unheard of?!
I'm aiming for 240HP at the front in my NA 3.5L early next year.....see how we go I guess.
Good luck, I've watched GTWizard dump alot of money into his N/A only to see a gain up to 220fwhp, I believe it dynoed at. I just don't think its worth it unless you're not looking to run under 13 seconds.