PDA

View Full Version : Vac Hose sizes?


Atrosity
11-09-2010, 12:38 PM
I plan on putting all my emissions back on the car including all the vac hose on the firewall. I need to know what sizes the hose are and how much should I get. Thanks! ;)
x2xtreme360
11-09-2010, 12:42 PM
Probably 4-6mm. I would just take a trip to pepboys and have them match the hoses up.
Atrosity
11-09-2010, 12:48 PM
Probably 4-6mm. I would just take a trip to pepboys and have them match the hoses up.

I plan on purchasing the colored hoses online and my car will be at my friends house for like 2 months tops.
Woz
11-09-2010, 01:50 PM
Well you want hose that fits snug to where you don't need any clamps. I also used non collapsable hose. I would get sample sizes and order what you need.
x2xtreme360
11-09-2010, 02:15 PM
Well you want hose that fits snug to where you don't need any clamps. I also used non collapsable hose. I would get sample sizes and order what you need.

Yes. Thick walled, non collapsible hoses that fit nice and snug. No cheap crappy silicone hoses. You can find them colored too.
Woz
11-09-2010, 04:04 PM
also sorry i can't help with sizes, i just had a bunch of different size hoses around when i was replacing mine.
DocWalt
11-09-2010, 05:11 PM
http://www.hosetechniques.com/svh-car-kits-mitsubishi-c-104_2_42/mitsubishi-3000gt-vr4-stealth-svh-kit-black-p-1951

It comes in black, red, and blue. They even used a 3s in their banner ads on motoiq, which is what grabbed my attention, haha.
x2xtreme360
11-09-2010, 05:54 PM
http://www.hosetechniques.com/svh-car-kits-mitsubishi-c-104_2_42/mitsubishi-3000gt-vr4-stealth-svh-kit-black-p-1951

It comes in black, red, and blue. They even used a 3s in their banner ads on motoiq, which is what grabbed my attention, haha.

Go by the sizes in that link.... do NOT buy that rip off price of $135.
Atrosity
11-09-2010, 07:40 PM
Intake Manifold (small fittings) - 03.5mm
Boost Controllers (Greddy, HKS & other) - 03.5mm, 04.mm or 06.0mm
Windshield Washer Bottle - 04.0mm
Intake Manifold (small fittings) - 06.0mm
Radiator Overflow Hose - 06.0mm or 08.0mm
Hood Hold Up Rod - 06.0mm or 08.0mm
Intake Pipe (large fittings) - 08.0mm (includes aftermarket intakes & some radiator overflow)
Misc. covers of hard lines, etc. - 10.0mm (refer to Slit ‘n Groom(TM) Technique in instructions)


Yeah this is what I was looking for, yeah I don't want to spend 135 dollars for something I can piece together with the correct heat resistance.

/thread