PDA

View Full Version : No blinkers, no ECS light



Frostedbutts
11-07-2010, 05:07 AM
I recently replaced my dash and have been having a few electrical issues since then.

Right now, most importantly, my blinkers do not work. I turn them on and nothing happens: no blinking light in the dash, no drop in voltage, no blinkers outside the car front or rear. I checked my fuses and my warning lights fuse was blown, but upon replacing it nothing has happened. I checked my interior fuses quickly and didn't see anything blown but I will pull them all and double check tomorrow.

Any ideas on where to start with this?

Secondly, and least important, my ECS light isn't on in my dash. It feels like it's in tour mode. Pressing the button does nothing and that's about all I've messed with it. I only really mention this because I don't know if it could be related - I've found a couple guides online of where to go troubleshooting this so I will start with that tomorrow.

Any help is appreciated, thanks!

GTOJOE
11-07-2010, 06:59 AM
you forgot to plug the hazard light back in. Without it no blinkers. Can't help you with the ECS. But most likely something is not plugged in.

Frostedbutts
11-08-2010, 07:54 PM
you forgot to plug the hazard light back in. Without it no blinkers. Can't help you with the ECS. But most likely something is not plugged in.

Well, that was it. My hazard light was plugged into where the ECS slot was, and my ECS plugged into nothing. Switched the ECS to the right connection and plugged in the hazard light and everything works now. :Clap:

GTOJOE
11-09-2010, 07:10 AM
Sweet. glad to help :P