PDA

View Full Version : They're Here!!! Hype Thread (Pics)



Fakepower
11-03-2010, 02:32 PM
Well they finally made it!

http://www.3sgto.org/attachment.php?attachmentid=1399&d=1288805502

FeaRpb
11-03-2010, 02:34 PM
Thats alot of blow up dolls

DocWalt
11-03-2010, 02:35 PM
What is it?

Emilie@GZP
11-03-2010, 02:36 PM
congrats on your box?...

3000GT MR
11-03-2010, 02:44 PM
Fail thread. its been done before

AshyBone
11-03-2010, 02:46 PM
^^ Nice engine.
This thread confuses me though lol.

Fakepower
11-03-2010, 02:48 PM
i love blow up dolls!!

Heres what's inside... 2/3 boxes

http://www.3sgto.org/attachment.php?attachmentid=1400&d=1288806355
http://www.3sgto.org/attachment.php?attachmentid=1403&d=1288806424
http://www.3sgto.org/attachment.php?attachmentid=1402&d=1288806417
http://www.3sgto.org/attachment.php?attachmentid=1401&d=1288806410

DR Stage 3 heads with High Rev Spring Kit.

Fakepower
11-03-2010, 02:54 PM
And Box 3/3

http://www.3sgto.org/attachment.php?attachmentid=1406&d=1288806807
http://www.3sgto.org/attachment.php?attachmentid=1408&d=1288806812
http://www.3sgto.org/attachment.php?attachmentid=1404&d=1288806800
http://www.3sgto.org/attachment.php?attachmentid=1407&d=1288806810
http://www.3sgto.org/attachment.php?attachmentid=1405&d=1288806804

DR750's with Forged Wastegates

DocWalt
11-03-2010, 02:55 PM
DRXXXs in the other box? or maybe even some DRXXXXs? :p

edit: mofo, you ninja posted. Nice DR750s!

Fakepower
11-03-2010, 02:56 PM
Fail thread. its been done before

CryBaby ... Takes awhile to resize all those in paint.

DocWalt
11-03-2010, 02:57 PM
The forum resizes them for you, just put up a 56K warning, lol.

OhioSpyderman
11-03-2010, 02:58 PM
Damn, Matt does some fine work!!!!

Can't wait to see the results of those boxes :)

Bob.

FeaRpb
11-03-2010, 02:59 PM
Sexxxxxxxxxxxx, can't wait to see results.

Fakepower
11-03-2010, 02:59 PM
The forum would not resize them... said the size was too large... its a 12 mb camera so each pictures is in the mb range ... maybe their too big?

FeaRpb
11-03-2010, 03:00 PM
Stop posting and install it.

DocWalt
11-03-2010, 03:01 PM
Oh, you attached them. You'd need to upload them to imageshack or something to use them at full size. I don't think anyone needs to see them fullsize to realize how sexy they are :p

Which spring are you using in the wastegates?

Fakepower
11-03-2010, 03:11 PM
Which spring are you using in the wastegates?

Hum good question i didnt specify when I ordered them ... i guess matt will have to answer that , my guess is the lower (12psi) spring.

Fakepower
11-03-2010, 03:12 PM
Stop posting and install it.

Still collecting parts, the block is back from paint today .... so maybe i can get going on it soon... waiting for the cams.

Blurr
11-03-2010, 03:25 PM
That's some damn fine photography too! More poeple need to have the photographic prowess illustrated there. I like the shot of the springs in the head.

93STLTH
11-03-2010, 03:44 PM
Your power won't be fake anymore!!

Granny
11-03-2010, 04:03 PM
Shiny....:loveeyes:

J. Fast
11-03-2010, 05:20 PM
Man you spent some coin! Very Nice. What cams are you going to go with?

onebadmollafolla
11-03-2010, 05:34 PM
Dang. That thing will scoot when all is said and done. :eek:

Atrosity
11-03-2010, 05:42 PM
Looks like a pile of pure crap! rawr! hahaha i keed i keed!

green-lantern
11-03-2010, 06:11 PM
Your power won't be fake anymore!!

This!

Very nice dood! I want!!!

GordonRamsey
11-03-2010, 06:54 PM
holy. shit. that is all.

familyMAN
11-03-2010, 07:18 PM
Hum good question i didnt specify when I ordered them ... i guess matt will have to answer that , my guess is the lower (12psi) spring.

Those look like the billet wastegates. If so, they are adjustable from 12-18psi according to the DR website.
billet wastegates (http://www.dynamicracing.com/customer/product.php?productid=475&cat=189&page=1)

GTOJOE
11-03-2010, 07:40 PM
Those look like the billet wastegates. If so, they are adjustable from 12-18psi according to the DR website.
billet wastegates (http://www.dynamicracing.com/customer/product.php?productid=475&cat=189&page=1)

This.... was gunna say the same thing. Those Forge wg actuators are adjustable. bloody expensive though. They can also be bought direct from Forge UK.

DocWalt
11-03-2010, 08:02 PM
Yes, but IIRC, you can swap the wastegate spring to bump the range up. Not really necessary, TD04 wastegates don't seem to have much of an issue cracking open.

PearlWhiteR/T
11-03-2010, 08:21 PM
Beautiful turbo's man... can't wait to see the complete build up and not to mention the numbers lol

Caswell239
11-03-2010, 08:29 PM
im jealous!!! im waiting till next winter for the DR750s. what are you doing with the bottom end?

Fakepower
11-03-2010, 10:54 PM
This is what is going in the bottom end.
http://www.3sgto.org/attachment.php?attachmentid=1413&d=1288835489

New Forged Crank, 3sx Rods, wiseco pistons

All balanced by Bob Morton Enterprises in Kansas City MO. <--- this guy knows his stuff, When i went to pick it up, I saw a really weird block it turned out to be Aeromotive's 2000+hp drag mustang ... he was doing all the machine work on it.

Bob
11-03-2010, 11:04 PM
AWESOME! That engine is going to be pure sex.

Caswell239
11-03-2010, 11:14 PM
This is what is going in the bottom end.
http://www.3sgto.org/attachment.php?attachmentid=1413&d=1288835489

New Forged Crank, 3sx Rods, wiseco pistons

All balanced by Bob Morton Enterprises in Kansas City MO. <--- this guy knows his stuff, When i went to pick it up, I saw a really weird block it turned out to be Aeromotive's 2000+hp drag mustang ... he was doing all the machine work on it.

did i mention i hate you?

ChargerX3
11-04-2010, 12:29 AM
That is a lot of pay stubs lying on your floor. Noiiiiccee!

futurevr4man
11-04-2010, 01:18 AM
someone has more money than he knows what to do with

Frostedbutts
11-04-2010, 06:52 AM
someone has more money than he knows what to do with

Looks to me like he knows exactly what to do with it.

SnakeSkinner
11-04-2010, 12:24 PM
Yes, but IIRC, you can swap the wastegate spring to bump the range up. Not really necessary, TD04 wastegates don't seem to have much of an issue cracking open.


Thy do if you want to make over 600 WHP with them. When my DR-750 car dynoed 604 whp the Stock WG's were blowing open up top, and did not allow me to run any more boost for more then a split second. Now that I have the Forged gates on there (set to 14psi) I have run over 30psi to red line on the street.

TT Eric
11-04-2010, 12:33 PM
Cool, you're gonna be able to push it even more then me with forged internal and Stage III heads.

Eric

Fakepower
11-04-2010, 12:52 PM
Hey matt could you post something about how to adjust those wastegates?

DocWalt
11-04-2010, 02:36 PM
Thy do if you want to make over 600 WHP with them. When my DR-750 car dynoed 604 whp the Stock WG's were blowing open up top, and did not allow me to run any more boost for more then a split second. Now that I have the Forged gates on there (set to 14psi) I have run over 30psi to red line on the street.

Even with the tension cranked up a bit on the normal wastegates? I don't remember if you had tried that, and I don't care to go back and find the thread.

bboyalan
11-04-2010, 03:58 PM
It is easy to state that the OP wants to make over 600 lol. Very nice man!

What will be fueling your setup btw?

OhioSpyderman
11-04-2010, 04:12 PM
What will be fueling your setup btw?

Obviously, his wallet!!!!

Bob. :)

Fakepower
11-04-2010, 04:33 PM
going to go with a custom -8AN hardline setup, kyosan pump, fuel lab FPR and filter. I'll probably go with either 550's or 660's injectors havent decided. AEM EMS going to the management of choice. I wont be running meth injection, This will be a straight pump car, but since our area has E85 I'll have tuning done for that also.

TurboSinceBirth
11-05-2010, 01:45 AM
If you live nearby KCMO you'll have to give me a ride in the DR-750 car when you're done with it. I'm about an hour away from there. I'd definitely like to know what the torque feels like on those turbos. :D

Fakepower
11-05-2010, 02:56 AM
I'm in St Joe, but ill be happy to make it happen ... probably looking at spring for the car to be done.... this project started as a 6spd conversion, now its basically a total restoration plus a few extra HP.

Lugnut
11-05-2010, 04:08 AM
Really cannot wait to see this come to life ..

AdamVR4
11-05-2010, 11:44 AM
Cool, you're gonna be able to push it even more then me with forged internal and Stage III heads.

Eric

You made 609 AWHP with DR750's on pump? Looks like you had alky injection, but still. Impressive.




Really cannot wait to see this come to life ..

You wear a sports bra? Or could your GF kick most of our asses? lol



To the OP: Great collection of parts.

TT Eric
11-05-2010, 12:39 PM
You made 609 AWHP with DR750's on pump? Looks like you had alky injection, but still. Impressive.


Yes with water/meth. 609WHP with the boost droping to 25-26psi at the end of the pull (MBC failing). In the street I was holding 30psi to the redline with one count of knock only, Matt says it should do 660/660 at 30 psi. Need to say it did 657WTQ around 4125RPM too on a pass.

The OP should make more then that on race gas with more timing!

Eric

DocWalt
11-05-2010, 01:24 PM
Yes with water/meth. 609WHP with the boost droping to 25-26psi at the end of the pull (MBC failing). In the street I was holding 30psi to the redline with one count of knock only, Matt says it should do 660/660 at 30 psi. Need to say it did 657WTQ around 4125RPM too on a pass.

The OP should make more then that on race gas with more timing!

Eric

Yo, Eric, can you post up your latest updates in a project thing? I had no idea you started pushing them as hard as Matt!

TT Eric
11-05-2010, 03:18 PM
You didn't saw the thread on the other forum ? (I do not want to Hijack the OP's thread)

Eric

Fakepower
11-05-2010, 03:36 PM
post away eric! this is a hype thread! you have a running car and numbers! = you win. it can be hype for your car also!

Tiberius
11-05-2010, 05:03 PM
Hey matt could you post something about how to adjust those wastegates?

What he said. I got some Forge actuators for my 13T's (Rob Beck originals). No idea what's supposed to be adjustable about them besides maybe the rod length. And even there I had to improvise to make it fit because the threads are too short.
Cutting them longer was not an option b/c of stupid imperial threads :(

Awesome parts by the way :w00t:

DocWalt
11-05-2010, 05:15 PM
You didn't saw the thread on the other forum ? (I do not want to Hijack the OP's thread)

Eric

No. I don't go there any longer.

TT Eric
11-05-2010, 05:20 PM
post away eric! this is a hype thread! you have a running car and numbers! = you win. it can be hype for your car also!

Done!

Here : http://www.3sgto.org/showthread.php?2102-Dyno-results-of-my-DR750-s!&p=35581#post35581

Eric

Fakepower
11-05-2010, 06:06 PM
Something new came today!!
http://www.3sgto.org/attachment.php?attachmentid=1426&d=1288991168

Brian Crower 272 Street Cams. Not the regrinds.

http://www.3sgto.org/attachment.php?attachmentid=1427&d=1288991336

mb3000
11-05-2010, 06:42 PM
Something new came today!!
http://www.3sgto.org/attachment.php?attachmentid=1426&d=1288991168

Brian Crower 272 Street Cams. Not the regrinds.

http://www.3sgto.org/attachment.php?attachmentid=1427&d=1288991336

:WhiteFlag: You are in the process of building my dream car.

TurboSinceBirth
11-06-2010, 01:08 AM
I'm in St Joe, but ill be happy to make it happen ... probably looking at spring for the car to be done.... this project started as a 6spd conversion, now its basically a total restoration plus a few extra HP.

I've got a few members in KC I need to go meet when I get my car on the road. I probably won't have it tuned on E-85 until this spring anyways. I need some really huge injectors and more fuel pumps. :D

a2j
11-06-2010, 03:13 AM
nice boxes... how much did they cost you?

Lugnut
11-06-2010, 06:06 PM
You wear a sports bra? Or could your GF kick most of our asses? lol


She is some pretty sexxy stuff !!! I originally had one without the sport bra on but I figured someone would bitch so I changed it before the ban :)

Fakepower
11-06-2010, 09:02 PM
You wear a sports bra? Or could your GF kick most of our asses? lol


She is some pretty sexxy stuff !!! I originally had one without the sport bra on but I figured someone would bitch so I changed it before the ban :)


..... errrr what? (no idea what you're talking about)

mb3000
11-06-2010, 10:01 PM
You wear a sports bra? Or could your GF kick most of our asses? lol


She is some pretty sexxy stuff !!! I originally had one without the sport bra on but I figured someone would bitch so I changed it before the ban :)

Definatly wouldn't be me!

CoopKill
11-06-2010, 11:30 PM
OMG that is going to be Sahhweet!