PDA

View Full Version : AN Fittings



Patryn
11-02-2010, 10:35 PM
I searched around, but could not really find anything at all. Is there a fitting that is 90 or 120 degrees, that would allow me to connect 8an SS braided hose, but have a 10an female connector? So an 8an hose fitting that would allow me to screw the fitting onto a 10an male connection.

Austin@STM
11-12-2010, 01:03 AM
You would need to do it with 2 separate fittings, as i do not know of such a fiiting. Get a -8 120* fitting, and the a -8male/-10 female adaptor fitting behind it.

Patryn
11-12-2010, 09:30 PM
You would need to do it with 2 separate fittings, as i do not know of such a fiiting. Get a -8 120* fitting, and the a -8male/-10 female adaptor fitting behind it.

Correct on that one. I either need to do that or setp the oil cooler down to a 16 row, which already comes with 8 an fittings on it. Got a 19 row, which is 10 an at the moment, mounted in the stock location.

Austin@STM
11-12-2010, 09:34 PM
The fittings aren't removable, we have a 8.5x11 core that accepts -8 fittings

Patryn
11-12-2010, 09:52 PM
Fits in the stock location? Limited to about a 6 inch height clearance in there with the FMIC piping. Could use a cooler that is thicker than 2 inches though, I've got clearance in that direction.