View Full Version : What I did today.......
vr3.9
09-11-2010, 11:03 PM
Started putting on the Jackhammer cam gears. It was too hot and too humid and so it was a pretty miserable day. I'm about 1/2 way didn't want to try setting up all the marks and tensioner while I was exhausted, dehydrated and light headed. Learned about that stuff the hard way. I hope these will help me get past the 473 mark on the dyno and get the 13T record.
http://i225.photobucket.com/albums/dd64/reachmercer/camgears.jpg
DocWalt
09-11-2010, 11:05 PM
Sheesh. Not something I'd want to be doing. Ever, lol. Good call on waiting...
pos-vr4
09-11-2010, 11:14 PM
I have a spanner wrench that has 2 lugs that go inbetween the openings in the gears and hold them while i bust the bolts in the cams loose, so i dont have to pull the VCs off. makes life alot easier.
PS: humid days suck!
vr3.9
09-11-2010, 11:24 PM
yea I debated with myself for quit a bit on whether to just a make a tool or pull the covers. That rear lift point bracket, convinced me I made the wrong choice. Don't think it's going back on.
fastnelson
09-11-2010, 11:26 PM
Getting the car done for the September 19 Maryland
NBF
I-AM-FURLONG
09-11-2010, 11:28 PM
This sounds fun!!!!1
DocWalt
09-11-2010, 11:29 PM
Today, I tried to track the source of a weird rattle. I think it's a pulley on the alt belt, or the power steering pump is rattling. RPM dependent noise...
MightyMouse
09-12-2010, 02:55 PM
Ran my fuel line, and installed the underbody aluminum line protector thing yesterday in between soccer practice and work.. Oh, and I made my account here.
dbest671
09-12-2010, 02:56 PM
Painting my car hauler floor with herculiner... what a f*ckin mess.
R/T93
09-12-2010, 03:02 PM
watching the F1 race and New england trounce Cinci
DuTTch
09-12-2010, 03:03 PM
I did a neighbourhood gargae sale, it was grueling.
Hey DuTTch
Did you sell a lot though?
Ed
vr3.9
09-12-2010, 03:25 PM
DuTTch, do you happen to have a drivers side motor mount that didn't sell in that garage sell?
green-lantern
09-12-2010, 03:32 PM
Sitting on my ass watching the Titans kick the shit out of the oakland raiders. I'm going to install some shop lights in the garage later.
vr3.9
09-12-2010, 03:34 PM
Doing the same thing as yesterday, making like a human water fall pouring out sweat while trying to put the car back together. Timing belts back on and looks good so hopefully it's all down hill from here.
green-lantern
09-12-2010, 03:43 PM
I'm trying to get my garage back in order. It was totally f&#ked after I did the AWD engine build. Soon I'll have the money for 19t's http://www.bawcforums.org/vbb/images/smilies/DevilSmile.gif.
dbest671
09-12-2010, 03:48 PM
I'm trying to get my garage back in order. It was totally f&#ked after I did the AWD engine build. Soon I'll have the money for 19t's http://www.bawcforums.org/vbb/images/smilies/DevilSmile.gif.
Here is a before picture... Now we want an after picture
http://i392.photobucket.com/albums/pp4/hoopb23/TNGrillNChill012s.jpg
Polygon
09-12-2010, 03:51 PM
Bought some Carbotech brake pads.
Street_Chally73
09-12-2010, 04:00 PM
Looks fun...I just reinstalled my rebuilt shifter assembly & installed some solid shifter cable link bushings. After the game, I'm hoping to get my clutch's hydraulic system bled once more. If that doesn't fix my random gear lock-out issue, then I'll be dropping the transmission to see what's happening.
EvanH
09-12-2010, 04:05 PM
"Enjoying" Iraq........Wait. I lied. Sat around wanting to go home.
Fletch
09-12-2010, 04:08 PM
EvanH, have any needs while you are over there?
Fresh Cope? I can send you anything (within reason), I remember when I was deployed and I wanted a few items that I did not want my "relatives" to buy me and send.
Let me know brother,
Semper Fi
green-lantern
09-12-2010, 04:10 PM
Here is a before picture... Now we want an after picture
http://i392.photobucket.com/albums/pp4/hoopb23/TNGrillNChill012s.jpg
It was way way worse than that pic lol. I might have a pic of it real bad. I'll see about a new pic also.
green-lantern
09-12-2010, 04:16 PM
http://i123.photobucket.com/albums/o310/hptech4564/AWD%20conversion/DSCF8534.jpg
I know I took some pics when it was really bad but I was just too embarrassed to post them and now I cant find them.
green-lantern
09-12-2010, 04:27 PM
well it doesn't really look all that much better but trust me it IS!
http://i123.photobucket.com/albums/o310/hptech4564/DSCF8612.jpg
http://i123.photobucket.com/albums/o310/hptech4564/DSCF8611.jpg
EvanH
09-12-2010, 05:33 PM
EvanH, have any needs while you are over there?
Fresh Cope? I can send you anything (within reason), I remember when I was deployed and I wanted a few items that I did not want my "relatives" to buy me and send.
Let me know brother,
Semper Fi
I really do appreciate it. I dont need anything as of right now. I am in the middle of a soon move. If I can think of anything I will keep this in mind. Though I dont dip or smoke. lol
EZnTn
09-12-2010, 06:05 PM
signed up here .. who'da thunk ?
Drove the SL for the first time in two weeks since surgery.
Doc said I was 'sposed to wait till Tuesday.
Short drive, in the rain, nice all the same.
green-lantern
09-12-2010, 06:41 PM
signed up here .. who'da thunk ?
Drove the SL for the first time in two weeks since surgery.
Doc said I was 'sposed to wait till Tuesday.
Short drive, in the rain, nice all the same.
Who are you? I don't recognize your screen name.
EZnTn
09-12-2010, 07:03 PM
Who are you? I don't recognize your screen name.
Have been on the other forum since early '06, occasionally posted on the TN3S section.
Didn't post much, read a lot.
Been in Greeneville since '99.
Both work and family commitments have kept me from any mini-gatherings.
green-lantern
09-12-2010, 07:10 PM
Have been on the other forum since early '06, occasionally posted on the TN3S section.
Didn't post much, read a lot.
Been in Greeneville since '99.
Both work and family commitments have kept me from any mini-gatherings.
http://www.3sgto.org/showthread.php?123-TN-Members-Represent!
well it doesn't really look all that much better but trust me it IS!
http://i123.photobucket.com/albums/o310/hptech4564/DSCF8611.jpg
Nice size shop!
green-lantern
09-12-2010, 07:36 PM
Nice size shop!
thanks, It's like over 30 X 60 something, it's damn big! The only thing is it's so big and uninsulated that you cant heat or cool it. I want to put a ceiling in it and insulate it then install heat and air but it's going to cost me a mint to do so.
MightyMouse
09-12-2010, 08:20 PM
Yeah, it looks like it'd be soooo much easier to work on the 3000gt in a workspace so large.. In my little one bay area of my garage it gets so cluttered so fast I have to clean the garage every time I go out there to work on the car it seems like.
I need to move a little farther into the country I suppose.
green-lantern
09-12-2010, 08:30 PM
Yeah the only problem is I can make one big mess before I need to clean up. lol
vr3.9
09-12-2010, 08:35 PM
Yea I'm envious of your garage Paul. But I guess if I had bigger I'd just have a bigger mess. Anyway got the car put back together. Then went for that moment of fear and trembling when you turn the key. Ahhh she ran perfect. So at least I know I followed Jackhammers instructions and they work. Now to go out and give it the old butt dyno test.
MightyMouse
09-12-2010, 09:54 PM
Yea I'm envious of your garage Paul. But I guess if I had bigger I'd just have a bigger mess. Anyway got the car put back together. Then went for that moment of fear and trembling when you turn the key. Ahhh she ran perfect. So at least I know I followed Jackhammers instructions and they work. Now to go out and give it the old butt dyno test.
That's funny, because that's why I've taken over a month just to put on fuel lines, the exhaust and the oil cooler..
Beef6
09-12-2010, 10:04 PM
Hey vr3.9, let us know how you like the cam gears once you get it all buttoned up. They are on my to buy list.
Tsi_shinobi
09-13-2010, 08:08 AM
today i sanded my headlights! well one of them...
and then my 2g conversion will really be on the way :-D
1stStealthN/A
09-16-2010, 09:26 PM
Bought another broke VR-4. http://i153.photobucket.com/albums/s204/Gasboiler/IMG_0756.jpg
Granny
09-16-2010, 09:28 PM
I couldn't live with out this thread!
So is the man butt here?
green-lantern
09-16-2010, 09:40 PM
I couldn't live with out this thread!
So is the man butt here?
Karen! You made it! :)
beepbeep
09-16-2010, 09:49 PM
subscribed.
beepbeep
09-16-2010, 09:49 PM
well it doesn't really look all that much better but trust me it IS!
http://i123.photobucket.com/albums/o310/hptech4564/DSCF8612.jpg
That's sexah right thar.
Granny
09-16-2010, 09:55 PM
Karen! You made it! :)
You and Vicki both PM'ed me to make sure I made it.
I don't get involved in all the drama but I know who my firends are.
I love you guys bunches
beepbeep
09-16-2010, 09:58 PM
You and Vicki both PM'ed me to make sure I made it.
I don't get involved in all the drama but I know who my firends are.
I love you guys bunches
Wouldn't be the same without you.
green-lantern
09-16-2010, 10:04 PM
That's sexah right thar.
Thanks :)
Wouldn't be the same without you.
this! all true!
Granny
09-16-2010, 10:11 PM
That's sexah right thar.
Yea,
Thats one sexy garage. I going to his house one day and roll all over the grease spots on the floor.
If I can find one.............
Intropy
09-17-2010, 12:35 AM
Granny!
Man, just found this thread and was suddenly both happy and sad. I had a lot of posts in the ol' "What I did today" thread.
Granny
09-17-2010, 12:52 AM
Granny!
Man, just found this thread and was suddenly both happy and sad. I had a lot of posts in the ol' "What I did today" thread.
Me too buddy!
I-AM-FURLONG
09-17-2010, 01:09 AM
in the process of watching 10 pounds of dog hair from my german shepard fly around in my car. I cant get the hair of the dang carpet
n2nsanity
09-17-2010, 01:52 AM
put a for sale sign in the window :P
DocWalt
09-17-2010, 10:06 AM
Drove to work. :p
Goallie11
09-17-2010, 10:12 AM
Put a racing oil pan, transfer case brace and left the downpipe off to get a wideband bung welded on.
CoreyB
09-17-2010, 11:17 AM
Got a coffee, came to work, sat down, checked the forums, ran some tests, checked the forums................
green-lantern
09-17-2010, 11:22 AM
Yea,
Thats one sexy garage. I going to his house one day and roll all over the grease spots on the floor.
If I can find one.............
Ha Ha, I'm sure you’ll find some. I’m hoping to work on it some this weekend and when I pull the downpipe there will be lots of oil. Damn LMI turbos!
akotten
09-17-2010, 11:51 AM
I have a spanner wrench that has 2 lugs that go inbetween the openings in the gears and hold them while i bust the bolts in the cams loose, so i dont have to pull the VCs off. makes life alot easier.
PS: humid days suck!
I was just going to say the same thing. Save yourself the work and invest in someting similar!
Boomer3000
09-17-2010, 12:09 PM
Walked outsided, looked at my 3s.(big sigh) Got into beater ass jeep cherokee(16.630 quarter mile time hehe) and came to work!
B-Man
09-17-2010, 12:13 PM
Drove to work :D
Atrosity
09-17-2010, 12:19 PM
Drove to work :D
How was that?!1?1!!one!
mh3kgt
09-17-2010, 12:20 PM
Looked at the vr4 under the car cover, sighed, drove to work, checked forums, and making a checklist to see if I have everything to drop the tranny tomorrow.
p.s. looks like i'm gonna be buying a spanner wrench to do my rear cam seals...F*&$ taking off the valve covers!! haha
B-Man
09-17-2010, 12:41 PM
How was that?!1?1!!one!
Traffic sucked.
EZnTn
09-17-2010, 12:48 PM
Listened to some heavy duty, brief downpours.
After those were over
Managed a walk up our one lane road
I'll get the GT out this afternoon & navigate backroads as much as possible
beepbeep
09-17-2010, 06:27 PM
in the process of watching 10 pounds of dog hair from my german shepard fly around in my car. I cant get the hair of the dang carpet
Our GSD sheds more than ANY of our other dogs...long/short hair--doesn't matter. GSD has them all beat. :rolleyes:
Polygon
09-17-2010, 09:31 PM
Dropped a bunch of stuff off at the powder coater.
green-lantern
09-19-2010, 12:07 AM
My buddy showed up with his bucket truck! We had to take it for a ride.
http://i123.photobucket.com/albums/o310/hptech4564/buckettruck2.jpg
http://i123.photobucket.com/albums/o310/hptech4564/buckettruck1.jpg
http://i123.photobucket.com/albums/o310/hptech4564/buckettruck3.jpg
green-lantern
09-19-2010, 12:09 AM
http://i123.photobucket.com/albums/o310/hptech4564/DSCF8619.jpg
http://i123.photobucket.com/albums/o310/hptech4564/DSCF8618.jpg
http://i123.photobucket.com/albums/o310/hptech4564/DSCF8616.jpg
http://i123.photobucket.com/albums/o310/hptech4564/DSCF8615.jpg
http://i123.photobucket.com/albums/o310/hptech4564/DSCF8613.jpg
http://i123.photobucket.com/albums/o310/hptech4564/buckettruck2.jpg
http://i123.photobucket.com/albums/o310/hptech4564/buckettruck1.jpg
http://i123.photobucket.com/albums/o310/hptech4564/buckettruck3.jpg
Sean Johnson
09-19-2010, 12:16 AM
that was redneck, but it was a blast, felt like I was 100ft in the air. Paul did good keeping us alive.
CoreyB
09-19-2010, 12:17 AM
Looks like a blast.
jbuhrman
09-19-2010, 12:21 AM
I re-wired the rear lights on my SV so the rear turns work, cleaned and oiled the chain.
Tomorow is alittle VR4 day
DocWalt
09-19-2010, 12:22 AM
Ha, I was at a graduation party and the father of the chick had one in the backyard and was giving rides. I don't do well with heights, haha.
I resealed my driveway today, finally :)
vr3.9
09-19-2010, 01:37 AM
Finally switched from mmcd to HHH. Really love it so far. New adjusted (since the aren't adjustable, jackhammers) cam gears leaned out my tune. Added a little fuel and she is pulling hard with little -3 knock. Now if I can just figure out how to hook up wb and boost in the scanmaster and log it on the HHH I'll be all set.
MightyMouse
09-20-2010, 10:20 PM
Got offered a position in our Loveland, OH data-center.. That means I may actually escape Memphis after all..
green-lantern
09-20-2010, 10:23 PM
Got offered a position in our Loveland, OH data-center.. That means I may actually escape Memphis after all..
Ohio? I'd say in memphis
Intropy
09-20-2010, 10:26 PM
Got offered a position in our Loveland, OH data-center.. That means I may actually escape Memphis after all..
Memphis to Ohio... do you have any data centers in places that don't suck?
Intropy
09-20-2010, 10:26 PM
Ohio? I'd say in memphis
LOL - great minds think alike.
green-lantern
09-20-2010, 10:30 PM
LOL - great minds think alike.
:highfive:
......
Sin'sVr4
09-20-2010, 10:32 PM
i got to appraise about 6 cars today and didnt make shit!! bad weather in car business= shitty day with no $$
Intropy
09-20-2010, 10:33 PM
:highfive:
......
weak..
green-lantern
09-20-2010, 10:35 PM
weak..
Hey Alan is working on the smiles so I am not bitching.
Intropy
09-20-2010, 10:40 PM
Ha ha, I think every other post of mine on here so far has been complaining about something. :)
Sin'sVr4
09-20-2010, 10:43 PM
sup intropy. still have those tec 15g's. lol been rebuilt 3 times and have been sitting in my garage waiting to get re-sold. Love my new 19T's
Intropy
09-20-2010, 11:03 PM
sup intropy. still have those tec 15g's. lol been rebuilt 3 times and have been sitting in my garage waiting to get re-sold. Love my new 19T's
What's up man. Yeah your car is looking great. I'm jealous, you're farther along with the AEM than I am, I still need to figure out the 2-step and such and get on a dyno.
green-lantern
09-20-2010, 11:17 PM
What's up man. Yeah your car is looking great. I'm jealous, you're farther along with the AEM than I am, I still need to figure out the 2-step and such and get on a dyno.
Don't talk to him Justin! He's unverified !
Intropy
09-20-2010, 11:37 PM
Don't talk to him Justin! He's unverified !
Oh noez!
jbuhrman
09-20-2010, 11:56 PM
I put my white face gauge overlays on my gauge cluster.
Going to wire it up and get the dash finished tomorow.
milkshakes
09-21-2010, 12:04 AM
Drove 20 hours, towing a Stealth behind me.
Atrosity
09-21-2010, 12:41 PM
Drove 20 hours, towing a Stealth behind me.
The one in your sig? :)
n2nsanity
09-21-2010, 07:42 PM
The one in your sig? :)
Speaking of sigs, is yours taking a shit?
Boomer3000
09-21-2010, 07:50 PM
trying to sell some of the parts that are currently running my aprtment and jeep lol!!! Just waiting on verification so i can sell them here =)
MaxClass
09-21-2010, 11:43 PM
Stopped by a Garage sale Sunday morning and they had this piece of black nagahyde material about 4x4 feet square for $2.00. Checked it against the cracked and soiled shift boot in my Fiances car and it was a perfect match so I bought it.
Came home and took the shift boot off of her car. Sat at my desk with an exacto knife and carefully dissembled it into 4 pieces. Made the patterns and cut out the pieces. Got out the sewing machine and stitched them together so they looked just like the original.
Can't believe how beautiful it came out. Installed it back in the car and showed her. Got lots of xoxoxoxoxoxoxo's.
Bottom line is: Looks awesome and all for $2.00 and a little time. Could probably make another one in 20 minutes if I had to. It really wasn't that hard but totally worth it. Contrary to what one might think all four pieces are a different shape so you do need four separate patterns.
Now, on to parking brake boots.
DocWalt
09-22-2010, 12:12 AM
Drove to Cherry Hill Mitsu, picked up a bumper and Mitsu decal (in stock parts FTW, lol) and spotted a Bricklin on some random side street while turning around to head home. Major WTF, as I'd never seen one in person before. Got home and swapped the bumper, forgot to take pics of the new bumper, but it needs cleaned up, the paper wrapping left crud on it. Went to a car meet, lol.
Bricklin:
http://img18.imageshack.us/img18/9225/img20100921114543.jpg
http://img197.imageshack.us/img197/1543/img20100921114620.jpg
Bumper:
From this:
http://img185.imageshack.us/img185/8800/img20100921131021.jpg
To this:
http://img818.imageshack.us/img818/2305/img20100921131056.jpg
Then this:
http://img186.imageshack.us/img186/4461/img20100921143042.jpg
Then... uh.. new bumper :D
vr4chick
09-22-2010, 06:30 AM
that was redneck, but it was a blast, felt like I was 100ft in the air. Paul did good keeping us alive.
Everyone here would have done it in a heartbeat ;)
MightyMouse
09-22-2010, 08:56 AM
Ohio? I'd say in memphis
Douche.....
MightyMouse
09-22-2010, 08:57 AM
Memphis to Ohio... do you have any data centers in places that don't suck?
Bags.........
MightyMouse
09-22-2010, 08:57 AM
You guys are always raining on my parades!!!.. Why oh why must you always hate on me..
Why you gots to waste my flava.. dayum!
:D
n2nsanity
09-28-2010, 03:52 AM
sold my 95 base, so i'm kinda 3/s'less
but not really cuz i still have like a car and a half worth of parts, lol
supposed to be picking up a new shell one day this week :)
green-lantern
09-28-2010, 07:24 AM
You guys are always raining on my parades!!!.. Why oh why must you always hate on me..
Why you gots to waste my flava.. dayum!
:D
Just looking out for ya bro. :p
Atrosity
09-28-2010, 11:37 AM
I boosted 17 PSI! Never felt good while my car knocked. Now time to tune for 17 PSI.
MightyMouse
09-28-2010, 11:45 AM
Just looking out for ya bro. :p
I know.. I know, but Memphis really really sucks compared to Cincinnati..
green-lantern
09-28-2010, 11:52 AM
I know.. I know, but Memphis really really sucks compared to Cincinnati..
Your doing it wrong! :p
EZnTn
09-28-2010, 08:04 PM
son & grandson came over.
we adjusted clutch pedal and bled the system.
big difference.
threaded rod from main cylinder has only a few threads left inside yoke on clutch pedal assy.
how can that be remedied and still maintain .2" - .5" free play?
grandson will never cease to bring a smile.
CoreyB
09-28-2010, 08:45 PM
There is likely air in the line. Try bleeding the system.
Granny
09-29-2010, 04:05 PM
Made one last appeal to get my tranny fixed before parting out.
Then I went for a wild ass ride in a supercharged Miata.
ntcmpjg
09-29-2010, 05:06 PM
sold my 95 base, so i'm kinda 3/s'less
but not really cuz i still have like a car and a half worth of parts, lol
supposed to be picking up a new shell one day this week :)
someone bought it from you eddie thats good to hear. sent a email to a guy with a 93 not running for a project when i get back. its in Fayetteville
Polygon
10-01-2010, 08:17 PM
http://www.synapsepc.com/Hosting/Forums/3S/Brakes.jpg
I did an overhaul on the brakes.
Carbotech Bobcats (Front)
SP Performance a lot like the Hawk HPS (Rear)
R1 Concepts E-Line Slotted Rotors
SCE Caliper Bolts
ATE Super Blue Fluid
I also polished all the metal pieces on the calipers and refurbished the e-brake shoes. I would still like to upgrade to some titanium head shields for the front, polish the rear calipers and do a better job on the front. And I'd like to do SS lines.
CoreyB
10-01-2010, 08:21 PM
Very nice.
vr3.9
10-03-2010, 07:59 PM
Finished gutting my 93 VR4. Power washed the carpet. Yea it was that bad. Also bleached it. Going to try and get it white and then dye it dark green. I doubt it will work but figure I'll give it a try before going with the spare standard gray. Also sold some RHD GTO parts and then sold my old TT block to someone else. Then helped a new Stealth owner find an oil leak. Yea it was like have a 3s shop around here all day.
Granny
10-03-2010, 11:01 PM
I'm fixing my car!
Between DJ and IPT my tranny is getting fixed...:hurray:
DJ's shop is going to give me a tranny pump and labor and IPT has agreeded to fix the tranny if I pay for the LSD!
These guys are awesome! :thankyou:
green-lantern
10-03-2010, 11:03 PM
I'm fixing my car!
Between DJ and IPT my tranny is getting fixed...:hurray:
DJ's shop is going to give me a tranny pump and labor and IPT has agreeded to fix the tranny if I pay for the LSD!
These guys are awsome! :thankyou:
Cool! I sure as hell hope it stays together this time!
Granny
10-03-2010, 11:16 PM
Cool! I sure as hell hope it stays together this time!
This is our last chance to save the 3k..Hubby says no more.
If this fails it's the supercharged Miata.
Polygon
10-04-2010, 12:42 AM
Very nice.
That's what I was thinking, but now, not so much.
terrets
10-04-2010, 02:13 AM
Absolutly nothing today. Tomorrow slave cylinder comes and I be doing slave cylinder, slave hose, fuel pump, rewire, datalogging with emu so I can get my 680s in soon and run e85 :D.
1stStealthN/A
10-05-2010, 09:00 PM
Removed the Clifford Matrix alarm system from the 95 VR-4.
MightyMouse
01-02-2011, 12:29 PM
SON OF A BIATCH!!!!
I was under the car today tightening some stuff up and noticed oil on my x-fer case.
Sure as crap it's my F*ing rear main seal.. I guess it didn't seal properly when I put it on..
I'm a dumb-ass and I approve this message.
green-lantern
01-02-2011, 01:21 PM
SON OF A BIATCH!!!!
I was under the car today tightening some stuff up and noticed oil on my x-fer case.
Sure as crap it's my F*ing rear main seal.. I guess it didn't seal properly when I put it on..
I'm a dumb-ass and I approve this message.
Bummer, are you sure it's not the output shaft seal?
MightyMouse
01-02-2011, 03:12 PM
From the trans? I'm pretty sure because it's engine oil, and not tranny fluid and there's oil on my flywheel and oil pan. I'm fairly certain its the rear main.
That sucks ass, but I could have figured something like this was bound to turn up. I was too close to done.
I ripped the entire dash apart to put my new center gauge pod in.. Looks pretty good, but I need some more parts to make it look better.
Got my oil pressure, boost and water temp gauges installed. Now I have to find a fuel pressure gauge that matches my innovate gauges or I have to put one under the hood.
green-lantern
01-02-2011, 04:00 PM
I want pic of center gauge pod installed.
mb3000
01-02-2011, 04:37 PM
^pics of the gauge pod installed.
Replaced AA clips and pulled out everything for the stupid turbo timer that I could get to without pulling the dash.
Lugnut
01-02-2011, 08:07 PM
This was a real PITA but did manage it without removing the dash !!!
http://i230.photobucket.com/albums/ee213/tazz_375/IMG_20101231_2101521.jpghttp://i230.photobucket.com/albums/ee213/tazz_375/IMG_20101231_2101341.jpghttp://i230.photobucket.com/albums/ee213/tazz_375/IMG_20110102_1849501.jpg
These were removed and reinstalled through the airbag opening .. Disconnecting the air vent brace on the passenger side and pushing it down out of the way makes it possible .. The gauges are 52mm AEM and they are backed with plexiglass on the stock housing .. The back edges had to be shaved to reinstall it ..
green-lantern
01-02-2011, 08:18 PM
This was a real PITA but did manage it without removing the dash !!! 1847184818491850
Nice, now post the big pics. :p
Did you pull them out through the glove box area?
MightyMouse
01-02-2011, 08:28 PM
You know I don't see how people manage to pull them out that way. There's a mount that runs front to back that gets in the way and pulling that center vent was the biggest pain in the nuts ever!!
I ended up pulling the entire lower console and the metal mount that is on the dash side (center console portion) and went in and out that way.. I'll post up some pics if I can get some decent lighting in there.
Lugnut
01-03-2011, 05:52 PM
You know I don't see how people manage to pull them out that way. There's a mount that runs front to back that gets in the way and pulling that center vent was the biggest pain in the nuts ever!!
I ended up pulling the entire lower console and the metal mount that is on the dash side (center console portion) and went in and out that way.. I'll post up some pics if I can get some decent lighting in there.
I used a gear wrench to get everything undone .. I suffered for it too with about twenty little cuts on my fingers but getting the cluster out was the hardest part .. I just got the vent out of the dash and we disconnected that sharp metal brace on the passenger side and just pushed it down out of the way .. To get the gauge cluster out we just pushed the bottom of the gauges back and flipped the top forward .. Then pushing down on the vent just worked it out .. Once I shaved the back edges it literally slid right back in in less than a minute .. The stock housing has alot of waste that can be cut away with the plexiglass backing set up we did .. I used a dremel to cut and shave everything .. And sorry I didnt take a picture of the housing after I shaved it because honestly I didnt expect it to fit back in on the first try but it did .. I also reinstalled everything with hex heads instead of the stock screws .. They are much easier to work with !!!
EZnTn
01-04-2011, 05:14 PM
Installed a new master clutch cylinder today, old one was leaking in a major way.
PIA getting the flare nut loose on the old body, till you take advantage of the slack in the hard clutch line and lift it up just enough to get a flare wrench on it
Waiting on a new clutch damper to put it all back together.
1/5 .... Damper arrived, thanx GZP !!!
Installed, lines hooked back up.
Removed bleeder plug from on top of slave, could only feel slight pressure when pumping the pedal, fluid/air spit out only on the first pump, then nothing.
Broke line on top of damper & pumped clutch, fluid galore. We got all the air out of the system.
Car was in neutral.
Why ... could we not get anything out of the bleeder line on top of the slave?
Any ideas, feedback or similar experiences?
mb3000
01-26-2011, 10:57 PM
Stripped paint off front & started sanding the rear.
http://i928.photobucket.com/albums/ad128/mb3000gt_photos/1992%203000GT%20VR4/IMG_0575.jpg
mh3kgt
01-26-2011, 11:00 PM
Good luck and happy polishing! Haha wish I had a spare set to polish myself. I just know it'd take me forever and I don't wanna be without my VC's that long
R/T93
01-27-2011, 02:04 AM
Damn, I gotta do that, I have an extra set of valve covers, think I might get them powdercoated instead of polished, not sure though. I suppose I should polish them though, just looks damn sexy when you open your hood and have to close your eyes!
DocWalt
01-27-2011, 02:55 AM
I wish I had a metal VC so I could polish it :( I'm jelly :p
Chatzvr4
01-28-2011, 12:31 PM
you know most polishing shops will do the valve covers in a couple of days for under 100.00
mb3000
01-28-2011, 06:52 PM
This is an extra set I had laying around, and it gives me a little something to do in my spare time.
green-lantern
02-06-2012, 07:58 PM
I finished installing more lights in the garage. Pretty damn bright now :)
DuTTch
02-06-2012, 07:59 PM
You are the high light of 3sgto
green-lantern
02-06-2012, 08:03 PM
WOOT! looks like the sun took a crap in the garage compared to how it was. Two tandem dual T5's and fixed some 8 foot T8's.
AdamVR4
02-06-2012, 08:10 PM
Very nice. My garage needs more lighting and a sink. Priorities.
green-lantern
02-06-2012, 09:15 PM
I was finding myself discouraged every time I went to the garage and finally realized it's because I couldn't see. lol
1stStealthN/A
02-07-2012, 08:12 PM
Finally got around to taking the short shifter out of the Stealth last Saturday in the 40° weather. Shifts good now, less effort. I love this winter weather.
green-lantern
02-07-2012, 11:04 PM
Drove my car to work in 30 degree weather. It hit's like 19-20psi in the cold and 15-16psi when it warms up to 60 on the way home.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.