View Full Version : What size spacers for 1st gen rims on 2nd gen VR4?
Intropy
10-30-2010, 02:18 PM
I have a set of stock 1st gen VR4 rims here that have good tires. Does anyone know the smallest spacer that will allow them to fit on a 2nd gen?
GTOJOE
10-31-2010, 01:42 AM
Just fit washers to each stud and test fit till you work out the minimum thickness. Then go buy a spacer to match.
DocWalt
10-31-2010, 01:45 AM
Just fit washers to each stud and test fit till you work out the minimum thickness. Then go buy a spacer to match.
+1 I know someone that was so lazy they just used washers instead of a spacer with no issues. YMMV, and I certainly don't suggest it.
Intropy
10-31-2010, 01:47 AM
Just fit washers to each stud and test fit till you work out the minimum thickness. Then go buy a spacer to match.
Yeah I could figure it out pretty easily, I just figured someone had the answer already.
Mikes2nd
10-31-2010, 01:50 AM
i think i needed 5mm.
i changed my rims though later and forgot.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.