Tackhammer
10-28-2010, 01:12 PM
Just wondering if there is a demand for an economy replacement fuel pump hanger
They would be similar to the dual hanger shown here, but would only have 1 piece and no power harness.
http://www.3sgto.org/showthread.php?1887-Modular-Fuel-Pump-Hangers
Basically you would just drop it in and splice the wires into your oem wires and/or your existing hotwire kit. This hanger would have 1 power wire versus 2 like my dual kit. OEM gage floats would still be in use
This would be an upgrade in and of itself because the 12 guage wire would be a complete circuit instead of going down to 18 guage at the bulkhead like the oem hanger, as well as a 12 guage ground wire
Additionally it would be a lot easier than the stocker to modify for 2 pumps because there would be a lot more free space to drill/tap/cut/weld, etc
Rough estimate on price would be around $200
They would be similar to the dual hanger shown here, but would only have 1 piece and no power harness.
http://www.3sgto.org/showthread.php?1887-Modular-Fuel-Pump-Hangers
Basically you would just drop it in and splice the wires into your oem wires and/or your existing hotwire kit. This hanger would have 1 power wire versus 2 like my dual kit. OEM gage floats would still be in use
This would be an upgrade in and of itself because the 12 guage wire would be a complete circuit instead of going down to 18 guage at the bulkhead like the oem hanger, as well as a 12 guage ground wire
Additionally it would be a lot easier than the stocker to modify for 2 pumps because there would be a lot more free space to drill/tap/cut/weld, etc
Rough estimate on price would be around $200