View Full Version : Metallic and Resin clip removal
GordonRamsey
10-25-2010, 07:03 PM
Do these just pop out when taking down the interior trim? I don't want to break anything, and they are in there.
OhioSpyderman
10-25-2010, 08:25 PM
Gordon, totally confused by your question....
"engrish pwease"....
(pics!)
Bob. :)
mb3000
10-25-2010, 09:40 PM
:Banana:+1 for pics, I think I know what you're asking but im not sure.
GordonRamsey
10-25-2010, 10:57 PM
The interior trim is held in by clips. But they aren't always accessible. So I was wondering if I just pull on the plastic pieces hard or if there is a way around it. As there is no access to all of them.
mb3000
10-25-2010, 11:35 PM
Like the clips that hold the door trim on?
http://s928.photobucket.com/albums/ad128/mb3000gt_photos/?action=view¤t=door2.jpg
GordonRamsey
10-25-2010, 11:57 PM
Not sure. I'm dealing with the trunk area right now. Just breaking into the cockpit.
DocWalt
10-26-2010, 12:11 AM
The little white things that poke through and clip in, or the latch style thingies, or what?
mb3000
10-26-2010, 12:27 AM
http://s928.photobucket.com/albums/ad128/mb3000gt_photos/?action=view¤t=trunk4.jpg
???
GordonRamsey
10-26-2010, 10:59 AM
mb3000 thats where im at. haha thanks for the pictures. But after you take ALL the screws out, and its just sitting in there, about halfway down in the middle there should be an outline of a "square", it looks like those circles, but a square. And it attaches there and wont come out. I just dont want to break it. haha.
GordonRamsey
10-26-2010, 01:58 PM
Found its a metallic clip and you seem to just have to yank on it. however the quarter trim is giving me problems.
GordonRamsey
10-26-2010, 04:51 PM
Well I finished my weight reduction for now, I took everything from the trunk to the passenger seat out. Headliner and the console and dash remain.
I couldn't say it made that huge of a difference, everything being mostly plastic and all. Not much you can do without spending money, but it still felt as if it made a slight improvement over full weight. Definitely need suspension to balance out the tail-light sensation. Got some work to do for next year. Definitely to get to 11secondFWD's weight. :D
n2nsanity
10-26-2010, 08:45 PM
a lot of the clips throughout the car seem to be onetime use clips. they almost always get damaged or broken.
for the rear trunk piece it should just yank out
here are some useful tools for removing most of your clips tho
http://www.harborfreight.com/media/catalog/product/cache/1/image/370x/9df78eab33525d08d6e5fb8d27136e95/i/m/image_3189.jpg
http://www.harborfreight.com/media/catalog/product/cache/1/image/370x/9df78eab33525d08d6e5fb8d27136e95/i/m/image_1718.jpg
GordonRamsey
10-26-2010, 11:27 PM
Everything worked fine with a screwdriver and my hands. Easier than expected though.
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.