PDA

View Full Version : Dash installation help



Mike-92RT
09-07-2019, 09:29 PM
I haven't posted here in awhile. I have finally found the time to work on my car. I currently removed the interior harness and have replaced it with another one from another 92 stealth.

I have a few questions about certain plugs that I cant pin point where they belong. I have attached pictures and hopefully you guys can help me, as any help will get my car back on the road asap.

EDIT: I have removed pictures of some plugs I found their home.. other ones still posted I still need help with.

https://i581.photobucket.com/albums/ss258/Mike92RT/20190907_181015.jpg
https://i581.photobucket.com/albums/ss258/Mike92RT/20190907_180032.jpg
https://i581.photobucket.com/albums/ss258/Mike92RT/20190907_180003.jpg
https://i581.photobucket.com/albums/ss258/Mike92RT/20190907_175920.jpg
https://i581.photobucket.com/albums/ss258/Mike92RT/20190907_175837.jpg

OhioSpyderman
09-09-2019, 07:03 AM
Mike there is a dash removal how to on Stealth316.com.

Bob.

Mike-92RT
09-09-2019, 08:23 AM
What I did Bob was remove my lower instrument harness, which plugs into the ecu, srs, fuse panel, radio, climate control... ect.. I had an electrical short in my old one, cut it at the door and replaced it with a newer harness.

I grabbed the harness from another 92 RT from a junkyard, my problem is I started it and stopped for a long period of time, with no pictures, rookie mistake...